® SEMICOND UC TOR 200mW SOD-523 SURFACE MOUNT Green Product Very Small Outline Flat Lead Plastic Package Zener Voltage Regulators Absolute Maximum Ratings Symbol TA = 25°C unless otherwise noted Parameter Value Units 200 mW TSTG Storage Temperature Range -55 to +150 °C TOPR Operating Temperature Range -55 to +150 °C PD Power Dissipation These ratings are limiting values above which the serviceability of the diode may be impaired. SOD-523 Flat Lead Specification Features: Wide Zener Voltage Range Selection, 2.4V to 75V Flat Lead SOD-523 Small Outline Plastic Package Extremely Small SOD-523 Package Anode Cathode Surface Device Type Mounting ELECTRICAL SYMBOL RoHS Compliant Green EMC Matte Tin(Sn) Terminal Finish Band Indicates Cathode Electrical Characteristics Device Type Device Marking MM5Z2V4B MM5Z2V7B MM5Z3V0B MM5Z3V3B MM5Z3V6B MM5Z3V9B MM5Z4V3B MM5Z4V7B MM5Z5V1B MM5Z5V6B MM5Z6V2B MM5Z6V8B MM5Z7V5B MM5Z8V2B MM5Z9V1B MM5Z10VB MM5Z11VB MM5Z12VB MM5Z13VB MM5Z15VB MM5Z16VB MM5Z18VB 05 15 25 35 45 +5 65 75 85 95 A5 B5 C5 D5 E5 F5 G5 H5 J5 K5 L5 M5 TA = 25°C unless otherwise noted VZ @ IZT (Volts) Min Nom Max 2.35 2.65 2.94 3.23 3.53 3.82 4.21 4.61 5.00 5.49 6.08 6.66 7.35 8.04 8.92 9.80 10.78 11.76 12.74 14.70 15.68 17.64 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 2.45 2.75 3.06 3.37 3.67 3.98 4.39 4.79 5.20 5.71 6.32 6.94 7.65 8.36 9.28 10.20 11.22 12.24 13.26 15.30 16.32 18.36 IZT (mA) ZZT @ IZT (Ω) Max IZK (mA) ZZK @ IZK (Ω) Max IR @ VR (μA) Max VR (Volts) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 100 100 100 95 90 90 90 80 60 40 10 15 15 15 15 20 20 25 30 30 40 45 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 564 564 564 564 564 564 564 470 451 376 141 75 75 75 94 141 141 141 160 188 188 212 45 18 9 4.5 4.5 2.7 2.7 2.7 1.8 0.9 2.7 1.8 0.9 0.63 0.45 0.18 0.09 0.09 0.09 0.045 0.045 0.045 1 1 1 1 1 1 1 2 2 2 4 4 5 5 6 7 8 8 8 10.5 11.2 12.6 DB-146 April 2009, Revision A Page 1 MM5Z2V4B through MM5Z75VB TAK CHEONG TAK CHEONG ® SEMICOND UC TOR Electrical Characteristics Device Type Device Marking MM5Z20VB MM5Z22VB MM5Z24VB MM5Z27VB MM5Z30VB MM5Z33VB MM5Z36VB MM5Z39VB MM5Z43VB MM5Z47VB MM5Z51VB MM5Z56VB MM5Z62VB MM5Z68VB MM5Z75VB N5 P5 R5 S5 T5 U5 V5 X5 Y5 Z5 −5 =5 ≡5 >5 <5 TA = 25°C unless otherwise noted VZ @ IZT (Volts) Min Nom Max 19.60 21.56 23.52 26.46 29.40 32.34 35.28 38.22 42.14 46.06 49.98 54.88 60.76 66.64 73.50 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 20.40 22.44 24.48 27.54 30.60 33.66 36.72 39.78 43.86 47.94 52.02 57.12 63.24 69.36 76.50 IZT (mA) ZZT @ IZT (Ω) Max IZK (mA) ZZK @ IZK (Ω) Max IR @ VR (μA) Max VR (Volts) 5 5 5 2 2 2 2 2 2 2 2 2 2 2 2 55 55 70 80 80 80 90 130 150 170 180 200 215 240 255 1 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 212 235 235 282 282 306 329 329 353 353 376 400 423 447 470 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 14.0 15.4 16.8 18.9 21.0 23.0 25.2 27.3 30.1 33.0 35.7 39.2 43.4 47.6 52.5 VF Forward Voltage = 1 V Maximum @ IF = 10 mA for all types Notes: 1. 2. 3. The Zener Voltage (VZ) is tested under pulse condition of 10mS. For detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighter voltage tolerances, contact your nearest Tak Cheong Electronics representative. The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed to IZT or IZK. DB-146 April 2009, Revision A Page 2 TAK CHEONG ® SEMICOND UC TOR Rating and Characteristic Curves Fig.1 TYPICAL FORWARD VOLTAGE Fig.2 EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE POWER PASSIPATION,mW 250 200 150 100 50 0 0 25 50 75 100 125 150 175 200 TEMPERATURE [℃ ] Fig.3 POWER DISSIPATION VS. AMBIENT TEMP. Fig.5 ZENER BREAKDOWN CHARACTERISTICS Fig.4 TYPICAL CAPACITANCE Fig.6 ZENER BREAKDOWN CHARACTERISTICS DB-146 April 2009, Revision A Page 3 TAK CHEONG ® SEMICOND UC TOR Fig.7 TYPICAL LEAKGE CURRENT Flat Lead SOD-523 Package Outline Note: Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions. DB-146 April 2009, Revision A Page 4 TAK CHEONG ® DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A