EMI/RFI Environmental Backshells AS85049/78 EMI/RFI Environmental Backshell M85049/78-11 W 01 Glenair Connector Designator H MIL-DTL-38999 Series III & IV, EN3645 Basic Part No. Clamp Size Shell Size Finish N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab Over Electroless Nickel F A Thread TABLE I Shell Size 9 11 13 15 17 19 21 23 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H B Dia Max .75 (19.1) .85 (21.6) 1.00 (25.4) 1.15 (29.2) 1.25 (31.8) 1.40 (35.6) 1.55 (39.4) 1.65 (41.9) 1.85 (47.0) B Dia G Cable Range H TABLE II Shell Size 09 11 13 15 17 19 21 23 25 Clamp Size Min Max 01 02 01 03 02 04 02 05 02 06 03 07 03 08 03 09 04 10 TABLE III F ±.062 .398 .458 .518 .588 .678 .868 .868 .958 .958 (1.6) (10.1) (11.6) (13.2) (14.9) (17.2) (22.0) (22.0) (24.3) (24.3) G ±.062 3.088 3.148 3.208 3.298 3.408 3.598 3.598 3.748 3.748 (1.6) (78.4) (80.0) (81.5) (83.8) (86.6) (91.4) (91.4) (95.2) (95.2) Cable Range Clamp Min Max Size .062 (1.6) .125 (3.2) 01 .125 (3.2) .250 (6.4) 02 .250 (6.4) .375 (9.5) 03 .375 (9.5) .500 (12.7) 04 .500 (12.7) .625 (15.9) 05 .625 (15.9) .750 (19.1) 06 .750 (19.1) .875 (22.2) 07 .875 (22.2) 1.000 (25.4) 08 09 1.000 (25.4) 1.125 (28.6) 10 1.125 (28.6) 1.250 (31.8) H Max .80 (20.3) 1.00 (25.4) 1.10 (27.9) 1.20 (30.5) 1.25 (31.8) 1.40 (35.6) 1.50 (38.1) 1.65 (41.9) 1.75 (44.5) 1.90 (48.3) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 39-20