AZM AZ10EL01D Ecl/pecl 4-input or/nor Datasheet

ARIZONA MICROTEK, INC.
AZ10EL01
AZ100EL01
ECL/PECL 4-Input OR/NOR
FEATURES
•
•
•
•
PACKAGE AVAILABILITY
230ps Propagation Delay
High Bandwidth Output Transitions
75kΩ Internal Input Pulldown Resistors
Direct Replacement for ON Semiconductor
MC10EL01 & MC100EL01
PACKAGE
SOIC 8
SOIC 8
TSSOP 8
TSSOP 8
1
2
PART NUMBER
AZ10EL01D
AZ100EL01D
AZ10EL01T
AZ100EL01T
MARKING
AZM10EL01
AZM100EL01
AZTEL01
AZHEL01
NOTES
1,2
1,2
1,2
1,2
Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts)
Tape & Reel.
Date Code “YWW” on underside of part.
DESCRIPTION
The AZ10/100EL01 is a 4-input OR/NOR gate. The device is functionally equivalent to the E101 device with
higher performance capabilities. With propagation delays and output transition times significantly faster than the
E101, the EL01 is ideally suited for those applications that require the ultimate in AC performance.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
PIN DESCRIPTION
PIN
D0 - D3
Q, Q̄
VCC
VEE
FUNCTION
Data Inputs
Data Outputs
Positive Supply
Negative Supply
D0
1
8
VCC
D1
2
7
Q
D2
3
6
Q
D3
4
5
V EE
1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (480) 890-2541
www.azmicrotek.com
AZ10EL01
AZ100EL01
Absolute Maximum Ratings are those values beyond which device life may be impaired.
Symbol
VCC
VI
VEE
VI
IOUT
TA
TSTG
Characteristic
PECL Power Supply (VEE = 0V)
PECL Input Voltage
(VEE = 0V)
ECL Power Supply
(VCC = 0V)
ECL Input Voltage
(VCC = 0V)
Output Current
--- Continuous
--- Surge
Operating Temperature Range
Storage Temperature Range
Rating
0 to +8.0
0 to +6.0
-8.0 to 0
-6.0 to 0
50
100
-40 to +85
-65 to +150
Unit
Vdc
Vdc
Vdc
Vdc
mA
°C
°C
10K ECL DC Characteristics (VEE = -4.75V to -5.5V, VCC = GND)
Symbol
Characteristic
1
Min
-1080
-1950
-1230
-1950
-40°C
Typ
Max
-890
-1650
-890
-1500
150
VOH
Output HIGH Voltage
VOL
Output LOW Voltage1
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
Input HIGH Current
IIH
Input LOW Current
0.5
IIL
IEE
Power Supply Current
14
17
1.
Each output is terminated through a 50Ω resistor to VCC – 2V.
Min
-1020
-1950
-1170
-1950
0°C
Typ
Max
-840
-1630
-840
-1480
150
0.5
Min
-980
-1950
-1130
-1950
25°C
Typ
Max
-810
-1630
-810
-1480
150
0.5
14
17
Min
-910
-1950
-1060
-1950
85°C
Typ
Max
-720
-1595
-720
-1445
150
0.5
14
17
14
17
Unit
mV
mV
mV
mV
μA
μA
mA
10K PECL DC Characteristics (VEE = GND, VCC = +5.0V)
Symbol
Characteristic
1,2
Min
3920
3050
3770
3050
-40°C
Typ
Max
4110
3350
4110
3500
150
Min
3980
3050
3830
3050
0°C
Typ
Max
4160
3370
4160
3520
150
Min
4020
3050
3870
3050
VOH
Output HIGH Voltage
VOL
Output LOW Voltage1,2
VIH
Input HIGH Voltage1
VIL
Input LOW Voltage1
IIH
Input HIGH Current
Input LOW Current
0.5
0.5
0.5
IIL
IEE
Power Supply Current
14
17
14
17
1.
For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value.
2.
Each output is terminated through a 50Ω resistor to VCC – 2V.
25°C
Typ
Max
4190
3370
4190
3520
150
Min
4090
3050
3940
3050
85°C
Typ
Max
4280
3405
4280
3555
150
0.5
14
17
14
17
Unit
mV
mV
mV
mV
μA
μA
mA
100K ECL DC Characteristics (VEE = -4.2V to -5.5V, VCC = GND)
Symbol
Characteristic
1
Min
-1085
-1830
-1165
-1810
-40°C
Typ
-1005
-1695
Max
-880
-1555
-880
-1475
150
VOH
Output HIGH Voltage
VOL
Output LOW Voltage1
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
Input HIGH Current
IIH
Input LOW Current
0.5
IIL
IEE
Power Supply Current
14
17
1.
Each output is terminated through a 50Ω resistor to VCC – 2V.
Min
-1025
-1810
-1165
-1810
0°C
Typ
-955
-1705
Max
-880
-1620
-880
-1475
150
0.5
Min
-1025
-1810
-1165
-1810
25°C
Typ
-955
-1705
Max
-880
-1620
-880
-1475
150
0.5
14
17
Min
-1025
-1810
-1165
-1810
85°C
Typ
-955
-1705
Max
-880
-1620
-880
-1475
150
0.5
14
17
16
20
Unit
mV
mV
mV
mV
μA
μA
mA
100K PECL DC Characteristics (VEE = GND, VCC = +5.0V)
Symbol
Characteristic
1,2
Min
3915
3170
3835
3190
3620
-40°C
Typ
3995
3305
Max
4120
3445
4120
3525
3740
150
Min
3975
3190
3835
3190
3620
0°C
Typ
4045
3295
Max
4120
3380
4120
3525
3740
150
Min
3975
3190
3835
3190
3620
VOH
Output HIGH Voltage
VOL
Output LOW Voltage1,2
VIH
Input HIGH Voltage1
VIL
Input LOW Voltage1
VBB
Reference Voltage1
IIH
Input HIGH Current
Input LOW Current
0.5
0.5
0.5
IIL
IEE
Power Supply Current
14
17
14
17
1.
For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value.
2.
Each output is terminated through a 50Ω resistor to VCC – 2V.
November 2006 * REV - 3
www.azmicrotek.com
2
25°C
Typ
4045
3295
Max
4120
3380
4120
3525
3740
150
Min
3975
3190
3835
3190
3620
85°C
Typ
4045
3295
Max
4120
3380
4120
3525
3740
150
0.5
14
17
16
20
Unit
mV
mV
mV
mV
mV
μA
μA
mA
AZ10EL01
AZ100EL01
AC Characteristics (VEE =10E(-4.75V to -5.5V), 100E(-4.2V to -5.5V); VCC =GND or VEE =GND, VCC =10E(+4.75V to +5.5V),
100E(+4.2V to +5.5V))
Symbol
tPLH / tPHL
tr / t f
Characteristic
Propagation Delay to
Output
Rise/Fall Time
20 – 80%
November 2006 * REV - 3
Min
-40°C
Typ
Max
Min
0°C
Typ
Max
Min
25°C
Typ
Max
Min
85°C
Typ
Max
70
220
370
120
220
320
130
230
330
150
250
350
ps
350
100
350
100
350
100
350
ps
100
www.azmicrotek.com
3
Unit
AZ10EL01
AZ100EL01
PACKAGE DIAGRAM
SOIC 8
NOTES:
1.
DIMENSIONS D AND E DO NOT
INCLUDE MOLD PROTRUSION.
2.
MAXIMUM MOLD PROTRUSION
FOR D IS 0.15mm.
3.
MAXIMUM MOLD PROTRUSION
FOR E IS 0.25mm.
November 2006 * REV - 3
DIM
A
A1
A2
A3
bp
c
D
E
e
HE
L
Lp
Q
v
w
y
Z
θ
www.azmicrotek.com
4
MILLIMETERS
MIN
MAX
1.75
0.10
0.25
1.25
1.45
0.25
0.36
0.49
0.19
0.25
4.8
5.0
3.8
4.0
1.27
5.80
6.20
1.05
0.40
1.00
0.60
0.70
0.25
0.25
0.10
0.30
0.70
8O
0O
INCHES
MIN
MAX
0.069
0.004
0.010
0.049
0.057
0.01
0.014
0.019
0.0075
0.0100
0.19
0.20
0.15
0.16
0.050
0.228
0.244
0.041
0.016
0.039
0.024
0.028
0.01
0.01
0.004
0.012
0.028
0O
8O
AZ10EL01
AZ100EL01
PACKAGE DIAGRAM
TSSOP 8
DIM
A
A1
A2
A3
bp
c
D
E
e
HE
L
Lp
v
w
y
Z
θ
NOTES:
1.
DIMENSIONS D AND E DO NOT
INCLUDE MOLD PROTRUSION.
2.
MAXIMUM MOLD PROTRUSION
FOR D IS 0.15mm.
3.
MAXIMUM MOLD PROTRUSION
FOR E IS 0.25mm.
November 2006 * REV - 3
www.azmicrotek.com
5
MILLIMETERS
MIN
MAX
1.10
0.05
0.15
0.80
0.95
0.25
0.25
0.45
0.15
0.28
2.90
3.10
2.90
3.10
0.65
4.70
5.10
0.94
0.40
0.70
0.10
0.10
0.10
0.35
0.70
6O
0O
AZ10EL01
AZ100EL01
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume
any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others.
Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or
for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may
occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify
and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages,
and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the
part.
November 2006 * REV - 3
www.azmicrotek.com
6
Similar pages