NTD6416ANL N-Channel Power MOSFET 100 V, 19 A, 74 mW Features Low RDS(on) High Current Capability 100% Avalanche Tested These are Pb−Free Devices http://onsemi.com MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter Symbol Value Unit Drain−to−Source Voltage VDSS 100 V Gate−to−Source Voltage − Continuous VGS $20 V ID 19 A Continuous Drain Current Steady State Power Dissipation Steady State Pulsed Drain Current TC = 25°C TC = 100°C TC = 25°C tp = 10 ms Operating and Storage Temperature Range Source Current (Body Diode) Single Pulse Drain−to−Source Avalanche Energy (VDD = 50 Vdc, VGS = 10 Vdc, IL(pk) = 18.2 A, L = 0.3 mH, RG = 25 W) Lead Temperature for Soldering Purposes, 1/8″ from Case for 10 Seconds RDS(on) MAX ID MAX 100 V 74 mW @ 10 V 19 A D 13 PD 71 W IDM 70 A TJ, Tstg −55 to +175 °C IS 19 A EAS 50 mJ G S 4 4 1 2 TL 260 °C Symbol Max Unit Junction−to−Case (Drain) − Steady State RqJC 2.1 °C/W Junction−to−Ambient − Steady State (Note 1) RqJA 47 THERMAL RESISTANCE RATINGS Parameter V(BR)DSS 1 3 2 3 IPAK CASE 369D STYLE 2 DPAK CASE 369AA STYLE 2 MARKING DIAGRAM & PIN ASSIGNMENTS 4 Drain 4 Drain YWW 64 16ANLG Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Surface mounted on FR4 board using 1 sq in pad size, (Cu Area 1.127 sq in [2 oz] including traces). 1 Gate 2 Drain 6416ANL Y WW G YWW 64 16ANLG • • • • 3 Source 1 Gate = Device Code = Year = Work Week = Pb−Free Package 2 Drain 3 Source ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. © Semiconductor Components Industries, LLC, 2009 October, 2009 − Rev. 0 1 Publication Order Number: NTD6416ANL/D NTD6416ANL ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Parameter Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 100 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate−to−Source Leakage Current V 120 VGS = 0 V, VDS = 100 V mV/°C TJ = 25°C 1.0 TJ = 125°C 100 IGSS VDS = 0 V, VGS = "20 V VGS(TH) VGS = VDS, ID = 250 mA "100 mA nA ON CHARACTERISTICS (Note 2) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain−to−Source On−Resistance RDS(on) Forward Transconductance 1.0 2.2 5.4 gFS V mV/°C VGS = 4.5 V, ID = 10 A 70 80 VGS = 10 V, ID = 10 A 62 74 VGS = 10 V, ID = 19 A 68 74 VDS = 5 V, ID = 10 A 18 mW S CHARGES, CAPACITANCES AND GATE RESISTANCE Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance 700 VGS = 0 V, f = 1.0 MHz, VDS = 25 V 1000 pF 40 nC 110 CRSS 50 Total Gate Charge QG(TOT) 25 Threshold Gate Charge QG(TH) 0.7 Gate−to−Source Charge QGS Gate−to−Drain Charge QGD 9.6 Plateau Voltage VGP 3.2 V Gate Resistance RG 2.4 W td(on) 7.0 ns VGS = 10 V, VDS = 80 V, ID = 19 A 2.4 SWITCHING CHARACTERISTICS (Note 3) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time tr td(off) VGS = 10 V, VDD = 80 V, ID = 19 A, RG = 6.1 W tf 16 35 40 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD Reverse Recovery Time tRR Charge Time Ta Discharge Time Reverse Recovery Charge Tb VGS = 0 V, IS = 19 A TJ = 25°C 0.9 TJ = 125°C 0.72 50 VGS = 0 V, dIS/dt = 100 A/ms, IS = 19 A QRR http://onsemi.com 2 V ns 38 14 112 2. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. 3. Switching characteristics are independent of operating junction temperatures. 1.2 nC NTD6416ANL 40 40 30 4.5 V 3.6 V 20 3.2 V 10 3.0 V 2.8 V 0 30 20 TJ = 125°C 10 1 2 3 4 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 0 5 0 1 2 3 4 VGS, GATE−TO−SOURCE VOLTAGE (V) ID = 19 A TJ = 25°C 0.1 0.09 0.08 0.07 0.06 2 4 6 8 10 VGS, GATE−TO−SOURCE VOLTAGE (V) 0.080 TJ = 25°C 0.075 0.065 VGS = 10 V 0.060 0.055 0.050 2 6 10 14 18 ID, DRAIN CURRENT (A) Figure 4. On−Region versus Drain Current and Gate−To−Source Voltage 10000 3 VGS = 0 V VGS = 10 V ID = 19 A IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) VGS = 4.5 V 0.070 Figure 3. On−Region versus Gate−To−Source Voltage 2.5 5 Figure 2. Transfer Characteristics RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) Figure 1. On−Region Characteristics 0.11 TJ = 25°C TJ = −55°C VGS = 2.4 V 0 VDS w 10 V 10 V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) TJ = 25°C 2 1.5 TJ = 150°C 1000 TJ = 125°C 100 1 0.5 −50 −25 0 25 50 75 100 125 150 175 10 10 TJ, JUNCTION TEMPERTURE (°C) 20 30 40 50 60 70 80 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature 90 Figure 6. Drian−to−Source Leakage Current versus Voltage http://onsemi.com 3 10 NTD6416ANL 1000 800 Ciss 600 400 0 Coss Crss 0 1000 10 20 30 40 50 60 70 80 90 100 80 VGS 6 4 Qgs VDS = 80 V ID = 19 A TJ = 25°C 0 10 15 20 Qg, TOTAL GATE CHARGE (nC) Figure 8. Gate−to−Source Voltage and Drain−to−Source Voltage versus Total Charge 20 0 25 20 VDS = 80 V ID = 19 A VGS = 10 V td(off) tf 10 td(on) 1 10 TJ = 25°C VGS = 0 V 15 10 5 0 0.5 100 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.0 RG, GATE RESISTANCE (W) VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation versus Gate Resistance Figure 10. Diode Forward Voltage versus Current 50 10 ms 10 100 ms 1 ms 1 10 ms dc 0.1 RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 1 10 VGS = 10 V SINGLE PULSE TC = 25°C 100 EAS, SINGLE PULSE DRAIN−TO− SOURCE AVALANCHE ENERGY (mJ) 100 ID, DRAIN CURRENT (A) 5 Figure 7. Capacitance Variation tr 0.01 40 Qgd 2 0 60 VDS VDS, DRAIN−TO−SOURCE VOLTAGE (V) 100 1 8 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 1200 100 QT IS, SOURCE CURRENT (A) C, CAPACITANCE (pF) TJ = 25°C VGS = 0 V 200 t, TIME (ns) VGS, GATE−TO−SOURCE VOLTAGE (V) 10 1400 1000 ID = 18.2 A 40 30 20 10 0 25 50 75 100 125 150 175 VDS, DRAIN−TO−SOURCE VOLTAGE (V) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 11. Resistive Switching Time Variation versus Gate Resistance Figure 12. Resistive Switching Time Variation versus Gate Resistance http://onsemi.com 4 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) NTD6416ANL 1.0 D = 0.5 0.2 0.1 0.1 0.05 P(pk) 0.02 0.01 SINGLE PULSE 0.01 1.0E-05 t1 t2 DUTY CYCLE, D = t1/t2 1.0E-04 1.0E-03 1.0E-02 t, TIME (ms) RqJC(t) = r(t) RqJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) − TC = P(pk) RqJC(t) 1.0E-01 1.0E+00 1.0E+01 Figure 13. Thermal Response ORDERING INFORMATION Package Shipping† NTD6416ANLT4G DPAK (Pb−Free) 2500 / Tape & Reel NTD6416ANL−1G IPAK (Pb−Free) 75 Units / Rail Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. http://onsemi.com 5 NTD6416ANL PACKAGE DIMENSIONS DPAK (SINGLE GUAGE) CASE 369AA−01 ISSUE A −T− C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE E R 4 Z A S 1 2 DIM A B C D E F H J L R S U V Z H 3 U F J L D STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN 2 PL 0.13 (0.005) M T SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.101 5.80 0.228 3.0 0.118 1.6 0.063 6.172 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 6 INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.025 0.035 0.018 0.024 0.030 0.045 0.386 0.410 0.018 0.023 0.090 BSC 0.180 0.215 0.024 0.040 0.020 −−− 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.63 0.89 0.46 0.61 0.77 1.14 9.80 10.40 0.46 0.58 2.29 BSC 4.57 5.45 0.60 1.01 0.51 −−− 0.89 1.27 3.93 −−− NTD6416ANL PACKAGE DIMENSIONS DPAK CASE 369D−01 ISSUE B C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. E R 4 Z A S 1 2 3 −T− SEATING PLANE K J F D G H 3 PL 0.13 (0.005) M DIM A B C D E F G H J K R S V Z INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 −−− STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN T ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTD6416ANL/D