SAW Oscillator Voltage Controlled SAW Oscillator (VCSO) NY13M09WA ■ Main Application Optical communication equipment (SONET, SDH, Ethernet) ■ Features ● Low phase noise and low jitter. (Max. 50fs) ● Dimensions : 13.8×9.2mm ● A leadless type ● Low height type (H : 2.6mm) ■ Specifications Model Item NY13M09WA Nominal Frequency Range (MHz) 1680 to 2200 Standard Frequency (MHz) 1747.031, 1986.819 Supply Voltage [VCC] (V) +3.3 ± 5 % Control Voltage [Vcont] (V) 0 to 3.3 Current Consumption (mA) Max. 100 Output Specification LVPECL (Complementary) Symmetry (%) 40 to 60 Output Load Condition (Ω) 50 (VCC − 2.0 V) Operating Temperature Range (°C) −10 to +85 Storage Temperature Range (°C) −40 to +85 Absolute Pull Range [APR] (*) Max. ± 50 × 10−6 Frequency Change Polarity Positive (*) Absolute Pull Range[APR] is difference value by subtracting Overall Frequency Tolerance from Frequency Pulling Range. * Please do not reflow the board upside down after mounting this product. (The product itself or the cover may fall off.) ■ Dimensions ■ Phase Noise Characteristic mm Phase Noise Characteristic Frequency : 1986.819MHz Jitter : Typ. 22fs 9.2±0.2 Terminal land connections 13.8±0.3 #1 Vcont #2 GND NC #3 #4 GND OUTPUT #5 OUTPUT NC #6 VCC H 2.6±0.2 L(f) [dBc/Hz] NV13M09WS : H=2.8±0.2 NV13M09WT : H=5.5±0.3 Land pattern (Typical) 2.54 2.54 1.0±0.2 #5 #4 1K 3.0 #6 2.9 6.0±0.2 2.9 3.0 #1 #2 #3 -20.00 -30.00 -40.00 -50.00 -60.00 -70.00 -80.00 -90.00 -100.0 -110.0 -120.0 -130.0 -140.0 -150.0 -160.0 -170.0 -180.0 100 10K 100K f [Hz] 1M 10M 1.27 5.08±0.2 ■ Specification Number Model Specification Number NY13M09WA NSC5140A Please specify the model name, frequency, and specification number when you order products. For further questions regarding specifications, please feel free to contact us. 1803C_NY13M09WA_e