FEATURES • 3 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 500mA • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 82% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • FIXED SWITCHING FREQUENCY (300KHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • OVER CURRENT PROTECTION • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS SMD TYPE, M1 TYPE DESCRIPTION T E C H N I C A L S P E C I F I C AT I O N The FKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with FKC05 series. FKC03 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy Full load and nominal Vin ± 1% Line regulation LL to HL at Full Load Load regulation No Load to Full Load Cross regulation(Dual) Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth Single Dual ± 5% ±0.02% / ºC, max. Over load protection % of FL at nominal input Start up time Thermal impedance Efficiency See table Input to Output Input(Output) to Case DIP SMD 9 -55ºC ~ +105ºC Nature convection 20ºC/watt MIL-STD-810F 5% to 95% RH EMC CHARACTERISTICS EMI 300KHz, typ. ESD MTBF (Note 1) -25ºC~+85ºC (with derating) -40ºC~+85ºC (non-derating) +100ºC MIL-STD-810F Switching frequency Weight 350mS, max. Vibration 300pF, max. Dimensions Standard M1 (Note 6) 1600VDC, min. 1600VDC, min. Relative humidity 1000VDC, min. 10 ohms, min. 20mAp-p Thermal shock Isolation capacitance Potting material Power up 36VDC 50VDC 100VDC ENVIRONMENTAL SPECIFICATIONS 180%, typ. Maximum case temperature GENERAL SPECIFICATIONS Approvals and standard Nominal Vin and constant resistive load Continuous, automatics recovery Storage temperature range Short circuit protection Isolation resistance Pi type 200μS Operating ambient temperature Transient response recovery time 25% load step change Base material 9 – 18VDC 18 – 36VDC 36 – 75VDC 12V input ± 0.2% Input surge voltage 24V input 100mS max ± 0.2% 48V input ± 1% Input reflected ripple current Nominal Vin and full load See table Temperature coefficient Case material 12V nominal input 24V nominal input 48V nominal input 0% Input filter Minimum load Isolation voltage Input voltage range IEC60950-1, UL60950-1, EN60950-1 Radiated immunity EN55022 Class A EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A EN61000-4-3 10 V/m Perf. Criteria A Nickel-coated copper Fast transient (Note 7) EN61000-4-4 EN61000-4-5 Non-conductive black plastic Surge (Note 7) ± 2KV Perf. Criteria B ± 1KV Perf. Criteria B 10 Vr.m.s Perf. Criteria A Epoxy (UL94-V0) Conducted immunity EN61000-4-6 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) 6 BELLCORE TR-NWT-000332 3.155 x 10 hrs 6 MIL-HDBK-217F 2.597 x 10 hrs VER:08 Page 1 of 3 Issued Date：2008/05/21 Output Current Model Number Input Range Output Voltage Min. load FKC03-12S33 FKC03-12S05 FKC03-12S12 FKC03-12S15 FKC03-12D05 FKC03-12D12 FKC03-12D15 FKC03-24S33 FKC03-24S05 FKC03-24S12 FKC03-24S15 FKC03-24D05 FKC03-24D12 FKC03-24D15 FKC03-48S33 FKC03-48S05 FKC03-48S12 FKC03-48S15 FKC03-48D05 FKC03-48D12 FKC03-48D15 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Input Current Eff (4) Capacitor(5) Output (4) No load Full load (%) Load max Full load Ripple & Noise (3) (2) 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 10mA 10mA 10mA 15mA 15mA 15mA 20mA 10mA 10mA 15mA 15mA 15mA 20mA 20mA 5mA 10mA 10mA 10mA 10mA 10mA 10mA 194mA 289mA 329mA 325mA 282mA 329mA 321mA 101mA 149mA 169mA 169mA 149mA 171mA 171mA 49mA 75mA 83mA 84mA 76mA 83mA 86mA 75 76 80 81 78 80 82 72 74 78 78 74 77 77 74 74 79 78 73 79 77 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF Note FKC03-48S05 Derating Curve 120 100 80 60 40 20 0 -40 -25 -10 M1 Version M1 Version 2. 3. 4. 5. 6. 7. BELLCORE TR-NWT-000332. Case 1：50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF /100V, ESR 48mΩ. OUTPUT POWER (%) 1. 5 20 35 50 65 82.4 80 95 110 AMBIENT TEMPERATURE(℃) VER:08 Page 2 of 3 Issued Date：2008/05/21 EFFICIENCY(%) 80 75 70 65 60 55 50 45 40 35 30 FKC03-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) Pin size is 0.02(0.5) Dia or 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin 1.00(25.4) 0.600(15.24) 1 BOTTOM 1.26 (32.0) 0.02(0.5) 20 5 VIEW Pin Area 0.04 x 0.02 (1.0 x 0.5) 9 10 11 0.15 (3.8) 24 0.43(10.9) 0.40 (10.2) 16 9 13 12 0.25 (6.4) 16 15 14 0.700 (17.78) 1.25 (31.8) BOTTOM VIEW 0.200 (5.08) 2 3 0.44(11.2) 0.15 (3.8) 0.92(23.4) 0.18(4.6) 23 22 0.100 (2.54) Suffix-SMD 0.80(20.3) 0.80(20.3) 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) SMD PIN CONNECTION DIP PIN CONNECTION PIN SINGLE DUAL PIN SINGLE DUAL PIN SINGLE DUAL PIN SINGLE DUAL 2 3 - INPUT - INPUT - INPUT - INPUT 23 22 + INPUT + INPUT + INPUT + INPUT 2 3 - INPUT - INPUT - INPUT - INPUT 23 22 + INPUT + INPUT + INPUT + INPUT 9 10 11 NC NC NC COMMON NC - OUTPUT 16 15 14 9 10 11 Others NC NC NC NC - OUTPUT COMMON NC NC + OUTPUT + OUTPUT 16 - OUTPUT COMMON COMMON NC 15 NC NC - OUTPUT 14 + OUTPUT + OUTPUT NC Others NC NC VER:08 Page 3 of 3 Issued Date：2008/05/21