RLD2WGS1 Laser Diodes Under development 660nm High Power / 780nm Low Power Dual Wave Laser RLD2WMGS1 RLD2WMGS1 is a dual wave laser which achieved high emission point distance accuracy according to a emission point simultaneous process. zDimensions（Unit : mm） 1.55 0.4 zApplications DVD recorder 0.7 zFeatures 1) DVD / CD Po (Optical output) : 240mW / 20mW 2) Emission point distance accuracy : 110µm ± 1µm 3) High Heat Radiation Type : Slim frame package 0.235(∆Y) 3.55MAX 2.1 1.5 2.5 3MAX 0.45(∆Z) 1 0.45 0.8 5.15 3.6MAX 1 (0.6) LD 3 LD 5 3-0.55MAX 2 GND 1 LD (650nm) anode 2 GND cathode 3 LD (780nm) anode 1.3 1.3 3-0.4 zAbsolute maximum ratings（Tc=25°C） DVD Parameter Optical output Symbol Limits Unit PO Pulse 240 mW Laser reverse voltage VR 2 V Operating temperature Top −10 to +75 (Pulse) °C Storage temperature Tstg −40 to +75 °C Symbol Limits Unit PO CW 20 mW Lase reverse voltage VR 2 V Operating temperature Top −10 to +75 (Pulse) °C Storage temperature Tstg −40 to +75 °C CD Parameter Optical output 1/3 RLD2WGS1 Laser Diodes Under development zElectrical and optical characteristics（Tc=25°C） DVD Parameter Symbol Min. Typ. Max. Unit Ith − 60 75 mA CW Threshold current Conditions Operating current Iop − 150 200 mA PO=80mW CW Operating voltage Vop − 2.7 3.3 V PO=80mW CW Output efficiency η 0.7 0.9 1.3 Beam diveragence (FWHM) θ // 7.5 − 13 deg θ⊥ 12.5 − 21 deg φ // −3 0 3 deg Beam tolerance Emission point accuracy mW/mA 30mW/ (I (80mW)− I (50mW)) PO=80mW CW φ⊥ −3 0 3 deg ∆X,Y,Z −80 0 80 deg λ 655 662 665 nm PO=80mW CW As − − 6 nm NA=0.45, PO=5mW CW Lasing wavelength Astigmatism − CD Parameter Symbol Min. Typ. Max. Unit Threshold current Ith − 50 80 mA CW Operating current Iop − 80 90 mA PO=20mW CW Operating voltage Vop − 1.9 2.3 V PO=20mW CW Output efficiency η 0.5 0.7 1.2 θ // 6 7.5 12 deg θ⊥ 13 15.5 21 deg φ // −3 0 3 deg Beam diveragence (FWHM) Beam tolerance Conditions mW/mA 4mW/ (I (8mW)− I (4mW)) PO=20mW CW φ⊥ −3 0 3 deg λ 770 782 790 nm PO=20mW CW Resistance Rs − 3.5 5 Ω PO=20mW CW Astigmatism As − − 6 µm Lasing wavelength NA=0.45, PO=5mW CW Note : θ ⊥, θ //are defined as full width of half maximum. [Common] Parameter Emission point distance Symbol Min. Typ. Max. Unit Conditions − 109 110 111 µm − 2/3 RLD2WGS1 Laser Diodes Under development zElectrical and optical characteristics curves（Tc=25°C） 1.0 1.0 80mW 25°C 40°C 200 0.8 60mW 50°C 60mW 0.6 60°C 100 70°C 0.4 0.2 50 200 If [mA] 300 0.4 400 Fig.1 Optical output vs. operating current 20mW 0.2 5mW Pulse width 50ns. Duty 40% 100 40mW 20mW 80°C 0 0.6 40mW Intensity Intensity Po [mW] 150 0 80mW 0.8 0.0 -60 -40 -20 0 20 Angle [deg] 40 Fig.2 θ // power dependence 60 0.0 -60 5mW -40 -20 0 20 Angle [deg] 40 60 Fig.3 θ ⊥ power dependence 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1