GBPC3502A thru GBPC3510A Glass Passivated Single Phase Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 35 Amp Features y y y y Circuit ~ Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per + - y Glass passivated die construction Integrally molded heatsink provides Very low thermal resistance for Maximum heat dissipation The plastic material used carries UL flammability recognition 94V-0 High surge current capability High temperature soldering guaranteed: 260℃ /10 seconds, 0.375” (9.5mm) lead length, 5lbs. (2.3kg) tension MIL-STD-750, Method 2026 Polarity: Marked on Body Mounting Position: Any ~ Module Type TYPE VRRM VRSM GBPC3502A GBPC3504A GBPC3506A GBPC3508A GBPC3510A 200V 400V 600V 800V 1000V 300V 500V 700V 900V 1100V Maximum Ratings and Thermal Characteristics (TA = 25℃ unless otherwise noted) Symbol IF(AV) Conditions Maximum average forward output rectified current Tc =55℃ Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) IFSM i2t Visol RθJC Tj, TSTG Weight Rating for fusing (t<8.3ms) a.c.50HZ;r.m.s.;1min Maximum thermal resistance(1) Operating Junction and storage temperature range Approximate Weight Values Units 35 A 400 A 660 A2s 2500 V 1.2 -55 to +150 15 ℃/W ℃ g Electrical Characteristics (TA = 25℃ unless otherwise noted) Symbol VF IR Notes: Conditions Maximum Instantaneous Forward Voltage per leg Maximum DC reverse current at rated DC blocking voltage per leg IFM =17.5A TA = 25℃ TA = 125℃ Values Units 1.1 V 5.0 500 µA (1) Unit case mounted on Al plate heatsink (2) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with M5 screw Document Number: GBPC3502A thru GBPC3510A Aug.22, 2014 www.smsemi.com 1 GBPC3502A thru GBPC3510A 50 IF, INSTANTANEOUS FORWARD CURRENT (A) I F, AVERAGE FORWARD CURRENT (A) Performance Curves Mounted on a 220x220x50 mm AL plate heatsink 40 30 20 10 Resistive or Inductive load 0 50 100 TC, CASE TEMPERATURE (ºC) Fig.1 Forward Current Derating Curve 500 10 1.0 0.1 Tj=25ºC Pulse Width=300μs 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.2 Typical Forward Characteristics (per element) 150 1000 Single Half-Sine Wave (JEDEC Method) 400 Cj, CAPACITANCE (pF) IFSM, PEAK FWD SURGE CURRENT (A) 0 100 300 200 100 100 Tj=150ºC 0 10 10 NUMBER OF CYCLES AT 60Hz Fig.3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (μA) 1 Tj=25ºC f =1MHZ 100 0.1 1 10 100 VR, REVERSE VOLTAGE (V) Fig.4 Typical Junction Capacitance (per element) 100 Tj=125ºC 10 1.0 0.1 Tj=25ºC 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig.5 Typical Reverse Characteristics (per element) Document Number:GBPC3502A thru GBPC3510A Aug.22,2014 www.smsemi.com 2 GBPC3502A thru GBPC3510A Package Outline Information CASE: GBPC-A 1.135(28.8) 1.115(28.3) 0.220(5.59) DIA. 0.200(5.08) 0.673(17.1) 0.633(16.1) ＋ ~ 1.135(28.8) 0.732(18.6) 1.115(28.3) 0.692(17.6) 0.673(17.1) 0.633(16.1) － ~ 0.582(14.8) 0.542(13.8) 0.094(2.4) DIA. 0.25 (6.35) 0.034(0.86) 0.030(0.76) 0.976(24.8) 0.839(21.3) 3.228(8.2) 3.071(7.8) Dimensions in (inches) mm Document Number: GBPC3502A thru GBPC3510A Aug.22,2014 www.smsemi.com 3