1733 Reader's Spreads pg1-203:document 1/27/09 4:14 PM Page 175 CCF chip fuse EU features circuit protection • Surface mount fuse suitable for primary and secondary circuits • Ceramic case provides excellent mechanical strength • Suitable for flow and reflow soldering • Marking: White body color with black marking • Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction Dimensions inches (mm) W t W L t Type L CCF .236±.008 (6.0±0.2) .098±.008 (2.5±0.2) d .098±.008 (2.5±0.2) .055±.008 (1.4±0.2) d End Cap d Ceramic Fuse Case Element ordering information New Part # CCF 1 N Type Style Characteristic N: Normal blow 1 T Rated Current Reference rating chart Termination Material T: Sn TE Packaging TE: 4mm pitch embossed plastic (1,000 pieces/reel) For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/13/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 177 1733 Reader's Spreads pg1-203:document 1/27/09 4:14 PM Page 176 PMS 300 neg. Black neg. CCF chip fuse applications and ratings circuit protection NEW NEW Part Designation Current Rating CCF1N0.4 CCF1N0.5 CCF1N0.63 CCF1N0.8 CCF1N1 CCF1N1.25 CCF1N1.6 CCF1N2 CCF1N2.5 CCF1N3.15 CCF1N4 CCF1N5 CCF1N6.3 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A CCF1N7 7A CCF1N8 CCF1N10 CCF1N12 8A 10A 12A CCF1N15 15A Voltage Rating Operating Temperature Range Fusing Characteristics Interrupting Capacity UL (c-UL) AC 125V 50A DC 60V 50A (DC 160V) UL (c-UL) 100% 200% 4 hour min. 1 second max. PSE AC 100V PSE AC 100V 100A PSE 130% 160% 200% 4 hour min. 1 hour max. 1 second max. UL (c-UL) AC 125V 50A DC 60V 50A UL (c-UL) 100% 200% 4 hour min. 1 second max. -55°C to +125°C Normal Melting l2t (A2, seconds) 650 510 390 250 90.4 75.9 59.3 42.9 36.6 26 20.1 15.3 11.4 0.024 0.030 0.052 0.125 0.156 0.220 0.513 0.814 1.31 2.37 3.85 6.5 10.6 Rated Current Fusing Time UL (c-UL) AC 125V DC 60V (DC 160V) UL (c-UL) AC 125V DC 60V Internal R. (mΩ) Max. (DC 160V) (DC 160V) UL (c-UL) AC 65V DC 65V UL (c-UL) AC 65V 50A DC 65V 50A UL (c-UL) 100% 200% 10.5 12.8 9.5 7.5 4.5 17.0 27.7 73.5 3.5 125.5 4 hour min. 60 seconds max. environmental applications 10 -35 -15 5 25 45 65 85 105 125 Ambient Temperature (°C) 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 7 8 10 12 15 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -55 Fusing Characteristics Fusing Time (Sec.) Derating Coefficient Number Derating Curve 1 .1 .01 .001 0.1 1 10 100 Fusing Current (A) Performance Characteristics Parameter Fusing Time Surface Temperature Rise Bending Test Resistance to Solder Heat Solderability Load Life Moisture Resistance Temperature Cycling Requirement Within specified time, no restrike Maximum temperature rise 140°C (rated current x 115%) Maximum temperature rise 75°C (rated current x 100%) No mechanical damages ∆R: ±10% 95% coverage minimum ∆R: ±10% ∆R: ±10% ∆R: ±10% Test Method Fusing time measured under rated current x 160% and x 200% Surface temperature should be measured by passing current Width of holding point: 90mm, Bending: 3mm, 1 time 260°C ± 5°C, 10 seconds ± 0.5 seconds 235°C ± 5°C, 3 seconds ± 0.5 seconds 70°C ± 2°C, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle 40°C ± 2°C, 90 - 95% RH, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle -55°C (30 minutes)/+125°C (30 minutes) cycle Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 178 11/21/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com