Product Specifications LED Driver LP1040-xx Series Switch-Mode LED Driver Total Power 40 Watts Input Voltages 90 ~ 264VAC Number of Outputs One ANZ#: Z094h, August 21, 2008 SPECIAL FEATURES • • • • • • • • ELECTRICAL SPECIFICATIONS Input range Frequency Power Factor Crest Factor Inrush current Input current Efficiency EMI filtering Maximum power Current Accuracy Load regulation ENVIRONMENTAL Leakage Current Operating temperature: -30 to 60 º C (De-rating : 1% per º C from 60~70ºC ) Hold up time Storage temperature: -40 to 85 º C Protection Humidity (Non-Condensing): 5% to 95% Cooling: Convection Vibration Frequency: 5 to 50 Hz SAFETY MTBF: >100,000 Hours at full load and 25ºC UL ambient conditions (MIL-217F) cUL EMC : Compliant to 47CFR, Part 2, Part15 and CE Cispr PUB, 22 Class B UL1310, Class 2 and UL48 compliant Single output, ranged from 10V up to 24VDC IP66 compliant Suitable for damp location Designed for outdoor or indoor applications Suitable in standard electrical junction boxes Compact, lightweight Active PFC reduces power consumption Model Number LP1040-36 LP1040-24 LP1040-22 LP1040-18 LP1040-15 LP1040-13 LP1040-12 LP1040-10 LP1040-09 Constant Voltage Mode Output V (DC) A (mA) Watts 36, ±5% 1100 40 24, ±5% 1670 40 22, ±5% 1820 40 18, ±5% 2220 40 15, ±5% 2680 40 13, ±5% 3080 40 12, ±5% 3330 40 10, ±5% 4000 40 9, ±5% 4450 40 90 ~ 264 VAC 47 to 63 Hz > 0.90 at full load, 115VAC 1.5 max. 30.0 Amps maximum at 230VAC, cold start, 25º C 0.50 Amps maximum at 115VAC 85% typical at maximum load 47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B 40W ±1% (when applicable) ±3% N/A 300uA typ. half cycle minimum at 120 VAC and 80% of rated load Over-voltage, Over current and Short circuit protection: Auto-recovery UL1310, Class 2 and UL879 recognized UL1310, Class 2 and UL879 recognized Certified Constant Current Mode Output V (DC) mA (max.) Watts 18~ 36 1110, ±5% 40 LP1040-36-Cxxxx 12~ 24 1670, ±5% 40 LP1040-24-Cxxxx 12 ~ 22 1820, ±5% 40 LP1040-22-Cxxxx 9 ~ 18 2200, ±5% 40 LP1040-18-Cxxxx 9 ~ 15 2680, ±5% 40 LP1040-15-Cxxxx 7 ~ 13 3080, ±5% 40 LP1040-13-Cxxxx 7 ~ 12 3330, ±5% 40 LP1040-12-Cxxxx 6 ~ 10 4000, ±5% 40 LP1040-10-Cxxxx 6~9 4450, ±5% 40 LP1040-09-Cxxxx Note: The output current of Constant Current models are adjustable at factory from 50% ~ 100%. Model Number RECOMMEND APPLICATION SCHEMATICS R R 40W, 24VDC LP1040 R R This configuration is based on LED with the following parameters: V : 3.0V ~ 3.5V I : 300mA ~ 350mA A. I : 300mA ~ 350mA Recommended value for R is 20 ohm, 3W INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz094h MECHANICAL DRAWING Model Information – Single DC output LP1040-XX XX – Voltage rating, 10, 08, 09, 10 …….. 24. AC input cable AWG #18, two conductors UL PLTC type or equiv. DC output cable AWG #18, two conductors UL PLTC type or equiv. DC OUTPUT WIRES 32 [1.26] 5 [0.20] (2X) 70 [2.76] 3.6 [0.14] (2X) 95 [3.74] 10 [0.39] (2X) AC INPUT WIRES 4 [0.16] (2X) 10 [0.39] (2X) LP1040 5 [0.20] (2X) mm [inch] INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz094h