Specific Lighting Product Data Sheet LTPL-C16FUVH405 Spec No.: DS23-2016-0022 Effective Date: 03/19/2016 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Specific Lighting LTPL-C16FUVH405 Specific Lighting Product Data-Sheet LTPL-C16FUVH405 Created Date: Version: 2 10 / 06 / 2015 12 / 16 / 2015 1/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 1. Description The LTPL-1616 series is a revolutionary, energy efficient and ultra-compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies. . 1.1 Features Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. EIA STD package. I.C. compatible. Meet green product and Pb-free(According to RoHS) 1.2 Application UV curing , UV marking , UV gluing UV drying of printing inks…etc. 2. Outline Dimensions Notes : 1. All dimensions are in millimeters. 2. Tolerance is ±0.1 mm (.004") unless otherwise noted. 2/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 3. Absolute Maximum Ratings at Ta=25℃ Parameter Symbol Rating Unit Power Dissipation Po 2.8 W DC Forward current If 700 mA Reverse Voltage *6 Vr 5 V Operating Temperature Range Topr -40 ~ +85 °C Storage Temperature Range Tstg -40 ~ +100 °C Junction Temperature Tj 100 °C 4. Electro-Optical Characteristics at Ta=25°C Value Parameter Symbol Unit Test Condition If = 350mA MIN. TYP. MAX. Φe 440 500 590 mW Viewing Angle 21/2 -- 150 -- Deg Peak Wavelength Wp 395 405 415 Forward Voltage Vf 2.7 3.3 3.9 V Reverse Current Ir -- -- 100 μA Radiant flux If = 350mA If = 350mA Vr = 5V Note 6 Notes: 1. Caution in ESD: Static Electricity and surge will damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 2. CAS140B is the test standard for the Radiant flux (Φe) & Peak wavelength (Wp). 3. Radiant flux (Φe) measurement tolerance: ±10% 4. Forward voltage (Vf) measurement tolerance: ±0.1V 5. Peak Wavelength (Wp) measurement tolerance: ±3nm 6. Reverse Voltage (Vr) condition is applied for Reverse Current (Ir) test only. The device is not designed for reverse operation. Operating the LED under reverse bias condition long time might result in damage or failure of the component. 3/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 5. Bin Code List Vf : Forward Voltage Spec. Table Vf (V) @ If = 350mA Vf Bin Min. Max. V1 2.7 2.9 V2 2.9 3.1 V3 3.1 3.3 V4 3.3 3.5 V5 3.5 3.7 V6 3.7 3.9 Forward Voltage measurement tolerance : ±0.1V Φe Radiant Flux Spec. Table Φe (mW) @ If = 350mA Φe Bin Min. Max. R1 440 470 R2 470 500 R3 500 530 R4 530 560 R5 560 590 Radiant Flux measurement tolerance: ±10% Wp: Peak Wavelength Spec table Wp (nm) @ If = 350mA Wp Bin Min. Max. P3U 395 400 P4A 400 405 P4B 405 410 P4C 410 415 Peak Wavelength Tolerance: +/- 3nm Notes: 1. Bin classification code is marked on each packing bag. 2. If there is any special or limited bin request, please contact with LiteOn’s sales 4/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 6. Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) 100% 80% 60% 40% 20% 0% 350 450 550 650 750 Wavelength (nm) Fig 1. Relative Spectrum of Emission Fig.2 Relative Radiant Flux vs. Forward Current 5/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 Fig. 3 Forward Current vs. Forward Voltage Fig.4 Relative Radiant Flux vs. Junction Temperature 6/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 7. User Guide Suggest IR Reflow Condition For Pb Free Process Profile Feature Lead Free Assembly Average Ramp-Up Rate (TSmax to TP) 3°C / second max Preheat Temperature Min (TSmin) 150°C Preheat Temperature Max (TSmax) 200°C Preheat Time (tSmin to tSmax) 60 – 120 seconds Time Maintained Above Temperature (TL) 217°C Time Maintained Above Time (tL) 60 – 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 5 seconds Ramp – Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Notes: 1. 2. 3. All temperatures refer to topside of the package, measured on the package body surface. The soldering condition referring to J-STD-020D. The soldering profile could be further referred to different soldering grease material characteristic. The grease vendor will provide this information. 4. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature. 5. Although the recommended reflow conditions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the LEDs. 6. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering method. 7/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 Cleaning Do not use unspecified chemical liquid to clean LED, they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering Package Dimensions of Tape Note: All dimensions are in mm 8/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel and maximum 1500 pieces per reel. 3. Minimum packing quantity is 100 pieces for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with EIA-481-1-B specifications. 9/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 8. CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 2. Storage This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing this moisture sensitive product is important to ensure the reliability of the product. The package is sealed: The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within one year, while the LEDs is packed in moisture-proof package with the desiccants inside. The package is opened: The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to solder process within 168hrs. If the Humidity Indicator shows the pink color in 10% even higher or exceed the storage limiting time since opened, that we recommended to baking LEDs at 60°C at least 48hrs. To seal the remainder LEDs return to package, it’s recommended to be with workable desiccants in original package. 3. Soldering Recommended soldering conditions: Reflow soldering Pre-heat Pre-heat time Peak temperature Soldering time 150~200°C 120 sec. Max. 260°C Max. 10 sec. Max.(Max. two times) Soldering iron Temperature Soldering time 300°C Max. 3 sec. Max. (one time only) 10/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 4. Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 5. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “ no light-up ” at low currents. To verify for ESD damage, check for “ light-up ” and Vf of the suspect LEDs at low currents. The Vf of “ good ” LEDs should be >[email protected] for InGaN product 11/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 6. Others The appearance and specifications of the product may be modified for improvement without prior notice. 7. Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-Sreas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4. Each work surface mats grounding is good? Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes with conductive flooring? 2. If conductive footwear used, conductive flooring also present where operator stand or walk? 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*? 4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all DLs? 5. All wrist strap or heel strap checkers calibration up to date? Note: *50V for Blue LED. Device Handling 1. Every ESDS items identified by EIA-471 labels on item or packaging? 2. All ESDS items completely inside properly closed static-shielding containers when not at static-safe workstation? 3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycle? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? 12/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4 Specific Lighting LTPL-C16FUVH405 9. Datasheet Version: Version Date Owner 1 2015/10/06 ChunChieh Change Item Initial specification 1. Product “Preliminary” Data Sheet change to Product Data-Sheet Page 1 2 2015/12/16 ChunChieh 2. 7 inch reel: maximum Qty change to 1500 pieces per reel. (Original 700pcs) Page 9 13/13 Part No. : LTPL-C16FUVH405 BNS-OD-FC002/A4