ON JANTX2N2222A Small signal switching transistor Datasheet

2N2222A
Small Signal Switching
Transistor
NPN Silicon
http://onsemi.com
Features
• MIL−PRF−19500/255 Qualified
• Available as JAN, JANTX, and JANTXV
COLLECTOR
3
2
BASE
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Symbol
Value
Unit
Collector −Emitter Voltage
Characteristic
VCEO
50
Vdc
Collector −Base Voltage
VCBO
75
Vdc
Emitter−Base Voltage
VEBO
6.0
Vdc
Collector Current − Continuous
IC
800
mAdc
Total Device Dissipation @ TA = 25°C
PT
500
mW
Total Device Dissipation @ TC = 25°C
PT
1.0
W
TJ, Tstg
−65 to
+200
°C
Symbol
Max
Unit
Thermal Resistance, Junction to Ambient
RqJA
325
°C/W
Thermal Resistance, Junction to Case
RqJC
150
°C/W
Operating and Storage Junction
Temperature Range
1
EMITTER
TO−18
CASE 206AA
STYLE 1
THERMAL CHARACTERISTICS
Characteristic
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
ORDERING INFORMATION
Device
Package
Shipping
TO−18
Bulk
JAN2N2222A
JANTX2N2222A
JANTXV2N2222A
© Semiconductor Components Industries, LLC, 2012
August, 2012 − Rev. 1
1
Publication Order Number:
2N2222A/D
2N2222A
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
V(BR)CEO
50
−
Vdc
−
−
10
10
mAdc
nAdc
−
−
10
10
mAdc
nAdc
−
50
nAdc
50
75
100
100
30
−
325
−
300
−
−
−
0.3
1.0
0.6
−
1.2
2.0
2.5
−
50
−
−
25
−
8.0
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage
(IC = 10 mAdc)
Collector−Base Cutoff Current
(VCB = 75 Vdc)
(VCB = 60 Vdc)
ICBO
Emitter−Base Cutoff Current
(VEB = 6.0 Vdc)
(VEB = 4.0 Vdc)
IEBO
Collector−Emitter Cutoff Current
(VCE = 50 Vdc)
ICES
ON CHARACTERISTICS (Note 1)
hFE
DC Current Gain
(IC = 0.1 mAdc, VCE = 10 Vdc)
(IC = 1.0 mAdc, VCE = 10 Vdc)
(IC = 10 mAdc, VCE = 10 Vdc)
(IC = 150 mAdc, VCE = 10 Vdc)
(IC = 500 mAdc, VCE = 10 Vdc)
Collector −Emitter Saturation Voltage
(IC = 150 mAdc, IB = 15 mAdc)
(IC = 500 mAdc, IB = 50 mAdc)
VCE(sat)
Base −Emitter Saturation Voltage
(IC = 150 mAdc, IB = 15 mAdc)
(IC = 500 mAdc, IB = 50 mAdc)
VBE(sat)
−
Vdc
Vdc
SMALL−SIGNAL CHARACTERISTICS
Magnitude of Small−Signal Current Gain
(IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz)
|hfe|
Small−Signal Current Gain
(IC = 1.0 mAdc, VCE = 10 Vdc, f = 1 kHz)
hfe
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, 100 kHz ≤ f ≤ 1.0 MHz)
Cibo
Output Capacitance
(VCB = 10 Vdc, IE = 0,100 kHz ≤ f ≤ 1.0 MHz )
Cobo
−
−
pF
pF
SWITCHING (SATURATED) CHARACTERISTICS
Turn−On Time
(Reference Figure in MIL−PRF−19500/255)
ton
−
35
ns
Turn−Off Time
(Reference Figure in MIL−PRF−19500/255)
toff
−
300
ns
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
2N2222A
PACKAGE DIMENSIONS
TO−18 3
CASE 206AA
ISSUE A
B
A
B
DETAIL X
U
P
C
L
R
F
U
A
SEATING
PLANE
K
NOTE 5
E
T
NOTE 7
D NOTES 4 & 6
0.007 (0.18MM) A B S C
3X
DETAIL X
M
N
H
2
1
3
J
M
C
LEAD IDENTIFICATION
DETAIL
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.
4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE
PLANE DEFINED BY DIMENSION R.
5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.
6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.
7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN­
SIONS A, B, AND T.
DIM
A
B
C
D
E
F
H
J
K
L
M
N
P
R
T
U
MILLIMETERS
MIN
MAX
5.31
5.84
4.52
4.95
4.32
5.33
0.41
0.53
--0.76
0.41
0.48
0.91
1.17
0.71
1.22
12.70
19.05
6.35
--45_BSC
2.54 BSC
--1.27
1.37 BSC
--0.76
2.54
---
INCHES
MIN
MAX
0.209
0.230
0.178
0.195
0.170
0.210
0.016
0.021
--0.030
0.016
0.019
0.036
0.046
0.028
0.048
0.500
0.750
0.250
--45 _BSC
0.100 BSC
--0.050
0.054 BSC
--0.030
0.100
---
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
3
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
2N2222A/D
Similar pages