MJE13005DP1 Rev.E Mar.-2016 描述 / DATA SHEET Descriptions TO-92 塑封封装 NPN 半导体三极管。Silicon NPN transistor in a TO-92 Plastic Package. 特征 / Features 击穿电压稳定、开关速度快。 High Voltage, High Switching Speed. 用途 / Applications 用于充电器等开关电路。 Suitable for electrocircuit of charger ect.. 内部等效电路 引脚排列 12 / Equivalent Circuit / Pinning 3 PIN1：Base PIN 2：Collector PIN 3：Emitter 放大及印章代码 / hFE Classifications & Marking 见印章说明。See Marking Instructions. http://www.fsbrec.com 1/6 MJE13005DP1 Rev.E Mar.-2016 极限参数 / DATA SHEET Absolute Maximum Ratings(Ta=25℃) 参数 Parameter 符号 Symbol 数值 Rating 单位 Unit Collector to Base Voltage VCBO 850 V Collector to Emitter Voltage VCEO 450 V Emitter to Base Voltage VEBO 9.0 V Collector Current - Continuous IC 3.5 A Collector Power Dissipation PC 1.2 W Junction Temperature Tj 150 ℃ Tstg -65～150 ℃ Storage Temperature Range 电性能参数 / Electrical Characteristics(Ta=25℃) 参数 Parameter Collector to Base Breakdown Voltage Collector to Emitter Breakdown Voltage Emitter to Base Breakdown Voltage Forward Voltage 符号 Symbol 测试条件 Test Conditions 最小值 典型值 最大值 单位 Min Typ Max Unit VCBO IC=1mA IE=0 850 V VCEO IC=10mA IB=0 450 V VEBO IE=1mA IC=0 9.0 V VF IF=1.5A 2.6 V 100 μA 250 μA Collector cut-off current ICEO VCB=850V Emitter Base Cut-Off Current IEBO VCE=450V IB=0 hFE(1) VCE=5.0V IC=10mA 7 hFE(2) VCE=5.0V IC=0.5A 20 hFE(3) VCE=5.0V IC=3.5A 5 VCE(sat)(1) IC=1.0A IB=0.2A 0.5 V VCE(sat)(2) IC=3.0A IB=0.75A 1.5 V VBE(sat) IC=2.0A IB=0.5A 1.6 V Fall time tf IC=0.25A 4.5 μs Storage time ts VCC=5V (UI9600) 0.5 μs DC Current Gain Collector to Emitter Saturation Voltage Base to Emitter Saturation Voltage http://www.fsbrec.com 3.5 40 2/6 MJE13005DP1 Rev.E Mar.-2016 电参数曲线图 DATA SHEET / Electrical Characteristic Curve SOA(DC) PC-TC 120 Ic(A) % 10 100 1 80 60 40 0.1 20 0 0.01 1 10 Vce(V) 0 1000 50 hFE-Ic hFE 100.00 100 100 150 Tj(℃) 200 hFE-Ic hFE 100.00 Tj=25℃ 10.00 10.00 1.00 0.001 0.01 0.1 1 Ic(A) 10 1.00 0.001 Vces-IC 0.01 0.1 1 Ic(A) 10 Vbes-IC Vces(v) 10.00 10.00 Vbes(v) 1.00 1.00 0.10 0.01 0.1 1 Ic(A) 10 0.10 0.1 http://www.fsbrec.com 1 Ic(A) 10 3/6 MJE13005DP1 Rev.E Mar.-2016 外形尺寸图 DATA SHEET / Package Dimensions http://www.fsbrec.com 4/6 MJE13005DP1 Rev.E Mar.-2016 印章说明 / DATA SHEET Marking Instructions BR 13005D P1 **** 说明： BR: 为公司代码 13005D： 为型号代码 P1: 规格代码 ****： 为生产批号代码，随生产批号变化。 Note: BR: Company Code. 13005D: Product Type. P1: Specification Code. ****: Lot No. Code,code change with Lot No. http://www.fsbrec.com 5/6 MJE13005DP1 Rev.E Mar.-2016 DATA SHEET 波峰焊温度曲线图(无铅) / Temperature Profile for Dip Soldering(Pb-Free) 说明： Note: 1、预热温度 25～150℃，时间 60～90sec; 1.Preheating:25~150℃, Time:60~90sec. 2、峰值温度 255±5℃，时间持续为 5±0.5sec; 2.Peak Temp.:255±5℃, Duration:5±0.5sec. 3、焊接制程冷却速度为 2～10℃/sec. 3. Cooling Speed: 2~10℃/sec. 耐焊接热试验条件 / Resistance to Soldering Heat Test Conditions 温度：270±5℃ 包装规格 散件包装 Units 包装数量 Units/Bag 只/袋 Bags/Inner Box 袋/盒 Units/Inner Box 只/盒 Dimension Inner Boxes/Outer Box 盒/箱 Units/Outer Box 只/箱 Bag 袋 包装尺寸 Inner Box 盒 (unit：mm3) Outer Box 箱 1,000 10 10,000 5 50,000 135×190 237×172×102 560×245×195 1,000 10 10,000 10 100,000 135×190 237×172×102 560×245×375 Units/tape 只/纸带 Tape/Inner Box 纸带/盒 Rows/Inner Box 纸带层/盒 Inner Boxes/Outer Box 盒/箱 Units/Outer Box 只/箱 Inner Box 盒 3,000 1 120 10 30,000 328×230×42 / AMMO Package Type 封装形式 使用说明 Time:10±1 sec / BULK TO-92 TO-92 Temp:270±5℃ / Packaging SPEC. Package Type 封装形式 编带包装 时间：10±1 sec. Units 包装数量 Dimension 包装尺寸 (unit：mm3) Outer Box 箱 小箱 480×346×235， 大箱 547×407×268 / Notices http://www.fsbrec.com 6/6