APTM120UM70D-AlN Single switch with Series diodes MOSFET Power Module VDSS = 1200V RDSon = 70mΩ max @ Tj = 25°C ID = 171A @ Tc = 25°C Application • Zero Current Switching resonant mode SK D DK DK S D SK G Benefits • Outstanding performance at high frequency operation • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Low profile Absolute maximum ratings Symbol VDSS ID IDM VGS RDSon PD IAR EAR EAS Parameter Drain - Source Breakdown Voltage Tc = 25°C Tc = 80°C Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Tc = 25°C Max ratings 1200 171 126 684 ±30 70 5000 24 50 3200 Unit V A V mΩ W A July, 2004 G Features • Power MOS 7® MOSFETs - Low RDSon - Low input and Miller capacitance - Low gate charge - Avalanche energy rated - Very rugged • Kelvin source for easy drive • Very low stray inductance - Symmetrical design - M5 power connectors • High level of integration • AlN substrate for improved thermal performance mJ These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1–6 APTM120UM70D–AlN Rev 0 S APTM120UM70D-AlN All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol BVDSS IDSS RDS(on) VGS(th) IGSS Characteristic Drain - Source Breakdown Voltage Zero Gate Voltage Drain Current Drain – Source on Resistance Gate Threshold Voltage Gate – Source Leakage Current Dynamic Characteristics Symbol Ciss Coss Crss Qg Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total gate Charge Qgs Gate – Source Charge Qgd Gate – Drain Charge Td(on) Turn-on Delay Time Tr Td(off) Test Conditions VGS = 0V, ID = 1.5mA Min 1200 VGS = 0V,VDS = 1200V T j = 25°C VGS = 0V,VDS = 1000V T j = 125°C VGS = 10V, ID = 85.5A VGS = VDS, ID = 30mA VGS = ±30 V, VDS = 0V 3 Test Conditions VGS = 0V VDS = 25V f = 1MHz Min VGS = 10V VBus = 600V ID = 171A Turn-off Delay Time Tf Fall Time Eon Turn-on Switching Energy X Eoff Turn-off Switching Energy Y Eon Turn-on Switching Energy X Eoff Turn-off Switching Energy Y Typ 43.5 6.6 1.2 1650 Max Unit V 1.5 6 70 5 ±600 mΩ V nA Max Unit mA nF nC 192 1074 20 Inductive switching @ 125°C VGS = 15V VBus = 800V ID = 171A R G =0.8Ω Rise Time Typ 17 ns 245 62 Inductive switching @ 25°C VGS = 15V, VBus = 800V ID = 171A, R G = 0.8Ω 7.6 Inductive switching @ 125°C VGS = 15V, VBus = 800V ID = 171A, R G = 0.8Ω 13.8 mJ 6.9 mJ 8.5 X Eon includes diode reverse recovery. Y In accordance with JEDEC standard JESD24-1. VF Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Test Conditions 50% duty cycle IF = 240A IF = 480A IF = 240A IF = 240A VR = 800V di/dt = 800A/µs IF = 240A VR = 800V di/dt = 800A/µs Min 1200 Typ Tj = 125°C 240 2 2.3 1.8 Tj = 25°C 400 Tj = 125°C 470 Tj = 25°C 4.8 Tj = 125°C 16 T c = 70°C APT website – http://www.advancedpower.com Max Unit V A 2.5 V July, 2004 Symbol Characteristic VRRM Maximum Repetitive Reverse Voltage IF(A V) Maximum Average Forward Current ns µC 2–6 APTM120UM70D–AlN Rev 0 Series diode ratings and characteristics APTM120UM70D-AlN Thermal and package characteristics Symbol Characteristic Min Transistor Series diode RthJC Junction to Case VISOL TJ TSTG TC RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Torque Mounting torque Wt Package Weight To heatsink For terminals M6 M5 2500 -40 -40 -40 3 2 Typ Max 0.025 0.20 Unit °C/W V 150 125 100 5 3.5 280 °C N.m g APT website – http://www.advancedpower.com 3–6 APTM120UM70D–AlN Rev 0 July, 2004 Package outline APTM120UM70D-AlN Typical Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (°C/W) 0.03 0.025 0.9 0.02 0.7 0.015 0.5 0.01 0.3 0.005 0.1 0.05 Single Pulse 0 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) Low Voltage Output Characteristics Transfert Characteristics 480 VGS =15, 10V 360 300 6V 240 5.5V 180 120 VDS > ID(on)xRDS (on)MAX 250µs pulse test @ < 0.5 duty cycle 420 7V ID, Drain Current (A) 5V 60 360 300 240 TJ =-55°C 180 TJ=25°C 120 60 4.5V 0 0 5 10 15 20 25 TJ =125°C 0 30 0 ID, DC Drain Current (A) VGS=10V 1.1 VGS=20V 1 4 5 6 7 0.9 0.8 135 90 45 0 0 60 120 180 240 ID, Drain Current (A) 300 360 25 50 75 100 125 150 July, 2004 RDS(on) Drain to Source ON Resistance 1.2 3 180 Normalized to VGS =10V @ 85.5A 1.3 2 DC Drain Current vs Case Temperature RDS(on) vs Drain Current 1.4 1 VGS, Gate to Source Voltage (V) VDS, Drain to Source Voltage (V) TC, Case Temperature (°C) APT website – http://www.advancedpower.com 4–6 APTM120UM70D–AlN Rev 0 I D, Drain Current (A) 420 1.10 1.05 1.00 0.95 0.90 0.85 -50 -25 0 25 50 75 100 125 150 ON resistance vs Temperature 2.5 VGS =10V ID=85.5A 2.0 1.5 1.0 0.5 0.0 -50 -25 Threshold Voltage vs Temperature 50 75 100 125 150 Maximum Safe Operating Area 100µs limited by RDS on 1.1 I D, Drain Current (A) VGS(TH), Threshold Voltage (Normalized) 25 1000 1.2 1.0 0.9 0.8 0.7 100 1ms 10ms 10 Single pulse TJ =150°C 1 0.6 -50 -25 0 25 50 75 100 125 150 TC, Case Temperature (°C) 1 Capacitance vs Drain to Source Voltage Ciss 10000 Coss Crss 1000 10 20 30 40 50 VDS, Drain to Source Voltage (V) 14 ID=171A TJ=25°C 12 10 VDS=240V VDS=600V 8 VDS=960V 6 4 2 0 0 420 840 1260 1680 2100 Gate Charge (nC) July, 2004 0 1200 10 100 1000 VDS, Drain to Source Voltage (V) Gate Charge vs Gate to Source Voltage VGS, Gate to Source Voltage (V) 100000 C, Capacitance (pF) 0 TJ, Junction Temperature (°C) TJ, Junction Temperature (°C) APT website – http://www.advancedpower.com 5–6 APTM120UM70D–AlN Rev 0 BVDSS, Drain to Source Breakdown Voltage (Normalized) Breakdown Voltage vs Temperature 1.15 RDS(on), Drain to Source ON resistance (Normalized) APTM120UM70D-AlN APTM120UM70D-AlN Delay Times vs Current Rise and Fall times vs Current 100 t d(off) 250 200 VDS=800V RG=0.8Ω T J=125°C L=100µH 150 100 50 VDS=800V RG=0.8Ω T J=125°C L=100µH 80 tr and tf (ns) td(on) and td(off) (ns) 300 60 40 tr 20 td(on) 0 0 60 90 120 150 180 210 240 270 60 90 ID, Drain Current (A) 36 VDS=800V RG=0.8Ω TJ=125°C L=100µH 20 16 Switching Energy (mJ) Switching Energy (mJ) 120 150 180 210 240 270 ID, Drain Current (A) Switching Energy vs Gate Resistance Switching Energy vs Current 24 Eon E off 12 8 4 0 V DS=800V ID=171A T J=125°C L=100µH 30 24 Eoff 18 Eon 12 6 60 90 120 150 180 210 240 270 0 1 I D, Drain Current (A) 2 3 4 5 6 Gate Resistance (Ohms) Operating Frequency vs Drain Current Source to Drain Diode Forward Voltage 1000 IDR, Reverse Drain Current (A) 175 150 Frequency (kHz) tf ZCS 125 Hard switching 100 VDS=800V D=50% RG=0.8Ω T J=125°C T C=75°C 75 50 25 0 60 80 100 120 140 ID, Drain Current (A) 160 TJ=25°C 10 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 VSD, Source to Drain Voltage (V) APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 6–6 APTM120UM70D–AlN Rev 0 July, 2004 40 TJ=150°C 100