Sharma MKTMPX Safety recognized film capacitor Datasheet

Sharma Film Capacitors
MKTMPX SERIES
SAFETY RECOGNIZED FILM CAPACITOR
1.
2.
3.
4.
5.
6.
Rated Interference Suppression "X2" Metallized Polypropylene Composite dielectric.
UL 1414 (250V AC), CUL 1414/Canda (250V VAC)
VDE KEMA SEV NEMKO DEMKO SEMKO FIMKO CHINA:
DIN EN 132400 (1994) / IEC60382-14 (1993) AND IEC DRAFT 40 (SEC)677
Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer
circuits and available for EMI filter and switching power supply and radio-and
monitor, television application.
Flame retardant plastic cases and epoxy resin. (compliance with 94V-0)
Self-healing properties.
Proven series wound construction.
Approved By : UL, CSA, VDE, KEMA, SEV, NEMKO, DEMKO, SEMKO, FIMKO, CHINA.
V
D E
CQC
SPECIFICATIONS :
DISSIPATION FACTOR
MAXIMUM PULSE RISE TIME
-40 к to +100 к
280VAC
0.0022 ~ 4.7uF
Applied 1500VDC for 1minute or 2100VDC
for 1 second.
+-10% (K)
Measured after a charging voltage 100 ±15VDC
for 1 minute.
LESS THAN OR EQUAL TO 0.33PF Њ 30,000M:
GREATER THAN 0.33PF Њ 10,000M:ΗPF
0.1% MAX. at 1KHz
250 VAC: 120 V/microsecond.
PF SIZE
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.047
0.056
0.068
0.068
0.082
0.1
0.1
0.1
0.12
0.15
0.15
0.18
0.18
0.22
T
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
5.0
6.0
6.0
6.0
5.0
5.5
6.0
6.0
5.5
6.5
7.5
6.0
8.5
6.0
8.5
OPERATING TEMPERATURE
RATED VOLTAGE
CAPACITANCE RANGE
DIELECTRIC STRENGTH
CAPACITANCE TOLERANCE
INSULATION RESISTANCE
W
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
13.0
13.0
13.0
18.0
18.0
13.5
18.0
18.0
18.0
18.0
26.5
18.0
26.5
18.0
Dimension
H
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
11.0
12.0
12.0
12.0
11.0
12.0
12.0
12.0
11.5
13.0
13.5
15.0
14.5
16.0
14.5
P
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
10.0
10.0
15.0
15.0
10.0
15.0
15.0
15.0
15.0
22.5
15.0
22.5
15.0
dO
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
PF
SIZE
0.22
0.27
0.33
0.33
0.33
0.39
0.47
0.47
0.47
0.47
0.47
0.56
0.68
0.68
0.82
0.82
1.0
1.0
1.0
1.5
1.5
1.8
2.0
2.0
2.2
2.2
2.5
3.0
3.3
4.0
4.7
W
26.5
26.5
18.0
26.5
26.5
26.5
17.5
18.0
26.5
26.5
32.0
32.0
26.5
32.0
32.0
26.5
32.0
32.0
37.0
32.0
37.0
37.0
31.0
38.0
31.0
38.0
38.0
38.0
38.8
48.0
48.0
W max
T
max
H max
25 ±2.0
dO
P±0.5
H
16.5
16.5
14.5
16.5
17.0
20.0
19.0
16.0
17.0
20.0
20.0
20.0
20.0
20.0
22.0
20.0
20.0
22.0
25.0
22.0
26.5
29.0
31.0
28.0
31.0
29.0
30.0
30.0
31.3
30.0
30.0
(Unit : mm)
T
7.0
8.5
8.5
7.0
8.5
10.0
11.0
10.0
8.5
10.0
11.0
11.0
10.0
11.0
13.0
10.0
11.0
13.0
13.5
13.0
17.0
19.0
22.0
18.0
22.0
19.0
20.0
20.0
21.7
30.0
30.0
P
22.5
22.5
15.0
22.5
22.5
22.5
15.0
15.0
22.5
22.5
27.5
27.5
22.5
27.5
27.5
22.5
27.5
27.5
31.5
27.5
31.5
31.5
27.5
31.5
27.5
31.5
31.5
31.5
31.5
41.5
41.5
dO
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8D
Tolerance: +/- 0.5mm
Tel: (949)642-7324
SECI Engineers & Buyers' Guide
Fax: (949)642-7327