RoHS CC02 Ceramic Core Chip Inductors 0.047 Max (1.19) Dimensions: Inches (mm) 0.026 Max (0.66) 0.027 Max (.70) 0.009 (0.23) 0.007 Min (0.181) 0.026 (0.66) 0.018 0.14 (0.46) (0.36) 0.020 (0.51) Features • 0402 size suitable for pick and place automation • Low Profile under .66mm • Ceramic core provide high self resonant frequency. • High Q values at high frequencies • Ceramic core also provides excellent thermal and batch consistency Electrical Inductance Range: 1nH to 180nH Tolerance: 10% over entire range Most values available in tighter tolerances Test Frequency: At specified frequency with Test OSC @ 200mV Operating Temp: -40ºC ~ 125ºC Irms: Based on 15ºC temperature rise @ 25º Ambient. Resistance to Soldering Heat Test Method: Reflow Solder the devide onto PCB Peak Temp: 260ºC ± 5ºC for 10 sec. Solder Composition: Sn/Ag3.0/Cu0.5 Total test time: 6 minutes Test Equipment (L/Q): HP4291A / HP16193A (SRF): HP8753D / Agilent E4991 (RDC): Chen Hwa 502BC Irms: HP4284A + HP42841A / HP4285A + HP42841A Physical Packaging: 4000 pieces per 7 inch reel. Marking: None Allied Part Number Inductance (nh) Tolerance (%) Q Min. Test Freq. (MHz) SRF Min. (MHz) CC02-1N0K-RC CC02-1N2K-RC CC02-1N3K-RC CC02-1N9K-RC CC02-2N0K-RC CC02-2N2K-RC CC02-2N4K-RC CC02-2N5K-RC CC02-2N7K-RC CC02-3N3K-RC CC02-3N6K-RC CC02-3N9K-RC CC02-4N3K-RC CC02-4N7K-RC CC02-5N1K-RC CC02-5N6K-RC CC02-5N8K-RC CC02-6N2K-RC CC02-6N8K-RC CC02-7N3K-RC CC02-7N5K-RC CC02-8N2K-RC CC02-8N7K-RC CC02-9N0K-RC CC02-9N1K-RC CC02-9N5K-RC CC02-10NK-RC CC02-11NK-RC CC02-12NK-RC CC02-13NK-RC CC02-15NK-RC CC02-16NK-RC CC02-18NK-RC CC02-19NK-RC CC02-20NK-RC CC02-22NK-RC CC02-23NK-RC CC02-24NK-RC CC02-27NK-RC CC02-30NK-RC CC02-33NK-RC CC02-36NK-RC CC02-39NK-RC CC02-40NK-RC CC02-43NK-RC CC02-47NK-RC CC02-51NK-RC CC02-56NK-RC 1.0 1.2 1.3 1.9 2.0 2.2 2.4 2.5 2.7 3.3 3.6 3.9 4.3 4.7 5.1 5.6 5.8 6.2 6.8 7.3 7.5 8.2 8.7 9.0 9.1 9.5 10 11 12 13 15 16 18 19 20 22 23 24 27 30 33 36 39 40 43 47 51 56 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 10 10 16 16 19 15 13 16 19 19 19 18 15 20 20 20 20 20 22 22 22 18 22 22 18 21 24 24 24 24 24 25 24 25 25 22 25 24 25 24 24 25 24 25 20 25 22 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 12700 10400 10400 11300 11100 10800 10500 10400 10400 7000 6800 6000 6000 4770 4800 4800 4800 4800 4800 4800 4800 4400 4100 4160 4160 4000 3900 3680 3600 3450 3280 3100 3100 3040 3000 2800 2720 2700 2480 2350 2350 2320 2100 2240 2030 2100 1750 1760 DCR Max. (Ω) 0.045 0.140 0.140 0.070 0.070 0.070 0.068 0.150 0.120 0.066 0.066 0.066 0.091 0.130 0.083 0.083 0.083 0.083 0.083 0.120 0.100 0.100 0.200 0.100 0.100 0.200 0.200 0.120 0.120 0.210 0.170 0.220 0.230 0.200 0.250 0.300 0.300 0.300 0.300 0.350 0.400 0.440 0.550 0.440 0.810 0.830 0.820 0.970 Rated Current (mA) 1360 640 640 1040 1040 960 790 640 640 840 840 840 700 640 800 760 760 760 680 680 680 680 480 680 680 480 480 640 640 440 560 560 420 480 420 400 400 400 400 400 400 320 200 320 100 150 100 100 Also available in 5% = J, 2% = G, 0.2nH = C, 0.1nH = B All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 04/02/14 www.alliedcomponents.com RoHS CC02 Ceramic Core Chip Inductors Features • 0402 size suitable for pick and place automation • Low Profile under .66mm • Ceramic core provide high self resonant frequency. • High Q values at high frequencies • Ceramic core also provides excellent thermal and batch consistency Allied Part Number Inductance (nh) Tolerance (%) Q Min. Test Freq. (MHz) SRF Min. (MHz) CC02-68NK-RC CC02-72NK-RC CC02-82NK-RC CC02-R10K-RC CC02-R18K-RC 68 72 82 100 180 10 10 10 10 10 22 20 20 20 8 250 250 250 250 100 1620 1260 1260 1160 700 DCR Max. (Ω) 1.12 2.00 1.55 2.00 2.70 Rated Current (mA) 100 30 50 30 50 Also available in 5% = J, 2% = G, 0.2nH = C, 0.1nH = B All specifications subject to change without notice. Electrical Inductance Range: 1nH to 180nH Tolerance: 10% over entire range Most values available in tighter tolerances Test Frequency: At specified frequency with Test OSC @ 200mV Operating Temp: -40ºC ~ 125ºC Irms: Based on 15ºC temperature rise @ 25º Ambient. Resistance to Soldering Heat Test Method: Reflow Solder the devide onto PCB Peak Temp: 260ºC ± 5ºC for 10 sec. Solder Composition: Sn/Ag3.0/Cu0.5 Total test time: 6 minutes Test Equipment (L/Q): HP4291A / HP16193A (SRF): HP8753D / Agilent E4991 (RDC): Chen Hwa 502BC Irms: HP4284A + HP42841A / HP4285A + HP42841A Physical Packaging: 4000 pieces per 7 inch reel. Marking: None 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 04/07/2014 www.alliedcomponents.com