MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG SWITCHMODE Soft Ultrafast Recovery Reverse Polarity Power Rectifier http://onsemi.com State−of−the−art geometry features epitaxial construction with glass passivation. Ideally suited for low voltage, high frequency switching power supplies, free wheeling diode and polarity protection diodes. SOFT ULTRAFAST REVERSE POLARITY RECTIFIER 6.0 AMPERES, 200 VOLTS Features Soft Ultrafast Recovery Matched Dual Die Construction − May Be Paralleled for High Current Output Short Heat Sink Tab Manufactured − Not Sheared Epoxy Meets UL 94 V−0 @ 0.125 in. AEC−Q101 Qualified and PPAP Capable SSRD8 Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements All Packages are Pb-Free* DPAK CASE 369C 1 4 3 MARKING DIAGRAM AYWW S 620RG Mechanical Characteristics Case: Epoxy, Molded Weight: 0.4 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds ESD Ratings: Machine Model = C Human Body Model = 2 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 2012 January, 2012 − Rev. 3 1 A Y WW G = Assembly Location = Year = Work Week = Pb−Free Package ORDERING INFORMATION Package Shipping† MSRD620CTRG DPAK (Pb−Free) 75 Units/Rail SSRD8620CTRG DPAK (Pb−Free) 75 Units/Rail MSRD620CTT4RG DPAK (Pb−Free) 2,500 / Tape & Reel SSRD8620CTT4RG DPAK (Pb−Free) 2,500 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: MSRD620CTR/D MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol Value Unit VRRM VRWM VR 200 V Average Rectified Forward Current (At Rated VR, TC = 162C) Per Leg Per Package IO A 3.0 6.0 Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz) Per Package Storage/Operating Case Temperature IFSM A 45 Tstg, Tc −65 to +175 C TJ −65 to +175 C Operating Junction Temperature Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Rating Symbol Thermal Resistance − Junction−to−Case (Note 1) Per Leg RqJC Thermal Resistance − Junction−to−Ambient (Note 1) Per Leg RqJA Thermal Resistance − Junction−to−Ambient (Note 2) Per Leg RqJA Value Unit C/W 5.0 C/W 60 C/W 166 1. Mounted with 700 mm2 copper pad size (approximately 1 in2) 1 oz FR4 board. 2. Mounted with pad size approximately 46 mm2 copper, 1 oz FR4 board. ELECTRICAL CHARACTERISTICS Rating Symbol Maximum Instantaneous Forward Voltage (Note 3) Per Leg (IF = 3.0 A) (IF = 6.0 A) VF Maximum Instantaneous Reverse Current (Note 3) Per Leg (VR = 200 V) IR Maximum Reverse Recovery Time (Note 4) Per Leg (VR = 30 V, IF = 1.0 A, di/dt = 50 A/ms) trr Value TJ = 125C 1.15 1.30 0.95 1.15 TJ = 25C TJ = 125C 1.0 200 http://onsemi.com 2 V mA ns 75 3. Pulse Test: Pulse Width 380 ms, Duty Cycle 2%. 4. trr measured projecting from 25% of IRM to ground. Unit TJ = 25C MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG IF, INSTANTANEOUS FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS TYPICAL CHARACTERISTICS 100 10 TJ = 150C 125C 1.0 25C -55C 0.1 0 0.5 1.0 1.5 2.0 2.5 3.0 125C 1.0 25C -55C 0.1 0 1.0 0.5 1.5 2.0 2.5 3.0 Figure 1. Typical Forward Voltage, Per Leg Figure 2. Maximum Forward Voltage, Per Leg 1E-03 IR , MAXIMUM REVERSE CURRENT (AMPS) IR , REVERSE CURRENT (AMPS) TJ = 150C VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) TJ = 150C 1E-05 125C 1E-06 1E-07 25C 1E-08 1E-09 -55C 1E-10 0 20 40 60 80 100 120 140 160 TJ = 150C 1E-04 125C 1E-05 1E-06 25C 1E-07 -55C 1E-08 180 200 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current, Per Leg Figure 4. Maximum Reverse Current, Per Leg IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 100 TJ = 25C C, CAPACITANCE (pF) 10 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 1E-04 10 1.0 0 100 40 80 120 160 10 RATED VOLTAGE APPLIED RqJC = 5C/W 9 8 7 6 dc 5 4 3 SQUARE WAVE 2 1 0 80 200 90 100 110 120 130 140 150 160 170 180 TC, CASE TEMPERATURE (C) VR, REVERSE VOLTAGE (VOLTS) Figure 6. Typical Current Derating, Case (Per Leg) Figure 5. Typical Capacitance http://onsemi.com 3 MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG TYPICAL CHARACTERISTICS 1000 R(t) (C/W) 100 Duty Cycle = 50% 20% 10 10% 5% 2% 1 1% 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 PULSE TIME (sec) 1 10 100 1000 100 1000 Figure 7. Thermal Response, Junction−to−Ambient (46 mm2 pad) 100 R(t) (C/W) 10 1 Duty Cycle = 50% 20% 10% 5% 2% 1% 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 PULSE TIME (sec) 1 Figure 8. Thermal Response, Junction−to−Ambient (1 in2 pad) http://onsemi.com 4 10 MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C−01 ISSUE D A E b3 c2 B Z D 1 L4 A 4 L3 b2 e 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C H DETAIL A 3 c b 0.005 (0.13) M H C L2 GAUGE PLANE C L SEATING PLANE A1 L1 DETAIL A ROTATED 905 CW DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 −−− 0.040 0.155 −−− MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 −−− 1.01 3.93 −−− SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.102 5.80 0.228 3.00 0.118 1.60 0.063 6.17 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MSRD620CTR/D