Effective June 2014 Supersedes June, 2009 Technical Data 4346 Bussmann CC06H Series High I2t Chip™ 0603 size fuses HALOGEN Pb HF FREE Applications For secondary protection in space constrained applications such as: • LCD Backlight inverters • Digital cameras • DVD Players • Bluetooth headsets • Battery packs Agency information • cURus Recognized Guide and Card JDXY2/ JDYX8, File E19180 Packaging • TR - Packaging code suffix for tape-and-reel (8mm wide tape on 178mm diameter reel specification EIA 481-1) • Quantity = 5000 fuses Product description: • Halogen free, lead free and RoHS compliant • High inrush withstand capability • Fast-acting performance • Ampacity alpha mark on fuse for easy identification • Standard termination design for easy solderability • Compatible with standard lead-free solder reflow and wave soldering processes • Excellent environmental integrity The Bussmann brand of circuit protection products (formerly of the Bussmann Division of Cooper Industries) is now part of Eaton’s Electrical Group, Electronics Division. Bussmann is now part of Eaton Same great products plus even more. Technical Data 4346 CC06H Series High I t Chip™ 0603 size fuses Effective June 2014 2 Electrical characteristics Amp Rating % of Amp Rating Opening Time 1-8A 100 4 Hours 1-7A 200 1-60 Seconds 1-8A 250 5 Seconds Max Specifications Interrupting Rating1, 4 (amps) Typical Cold Resistance2 (Ω) Typical Pre-Arcing3 (I2t) Typical Voltage Drop (mV) Typical Power Dissipation (W) Alpha Marking Agency Information (cURus) Catalog Number Amp Rating5 Voltage Rating (Vdc) CC06H1A 1 32 50 0.25 0.02 310 0.32 B x 1.5 32 50 0.13 0.07 250 0.38 H x CC06H1.5A CC06H2A CC06H2.5A CC06H3A 2 32 50 0.068 0.14 170 0.38 K x 2.5 32 50 0.05 0.25 155 0.38 L x 3 32 50 0.035 0.30 130 0.38 O x 3.5 32 50 0.023 0.50 100 0.35 R x CC06H4A 4 32 50 0.02 0.8 110 0.45 S x CC06H5A 5 32 50 0.013 1.6 95 0.48 T x CC06H6A 6 32 50 0.0076 2.6 80 0.48 V x CC06H7A 7 32 50 0.0056 3.3 80 0.56 X x CC06H8A 8 32/24 50/80 0.0040 4.5 75 0.60 Z x CC06H3.5A 1. DC Interrupting Rating (measured at rated voltage, time constant of less than 50 microseconds, battery source). 2. DC Cold Resistance are measured at <10% of rated current in ambient temperature of 20°C FOR REFERENCE ONLY - CONTROLLED VALUES HELD BY PLANT AND SUBJECT TO CHANGE WITHOUT NOTICE. 3. Typical Pre-arcing I2t are measured at rated DC voltage, 10In current (not to exceed interrupting rating). 4. The insulation resistance after breaking capacity test is higher than 0.1MΩ when measured by 2X rated voltage. 5. Device designed to carry rated current for 4 hours minimum. An operating current 80% or less of rated current is recommended, with further design derating required at elevated ambient temperature. See Temperature Derating Curve on next page. 2 www.eaton.com/elx CC06H Series High I2t Chip™ 0603 size fuses Technical Data 4346 Effective June 2014 Time-current curves — average melt www.eaton.com/elx 3 Technical Data 4346 Effective June 2014 I2t (A2s) I2t vs. time curves 4 www.eaton.com/elx CC06H Series High I t Chip™ 0603 size fuses 2 CC06H Series High I2t Chip™ 0603 size fuses Technical Data 4346 Effective June 2014 I2t (A2s) I2t vs. current curves www.eaton.com/elx 5 Technical Data 4346 CC06H Series High I t Chip™ 0603 size fuses Effective June 2014 2 Temperature derating curve Pad layout 1.25 (0.05) 0.90 (0.035) 0.50 (0.02) Dimensions - mm (in) Drawing not to scale. 1.60 ± 0.15 (0.063 ± 0.006) 0.81 ± 0.15 (0.032 ± 0.006) 0.35 ± 0.15 (0.014 ± 0.006) 0.47 ± 0.08 (0.0185 ± 0.003) A0 B0 D0 E1 E2 F G P0 P1 P2 T W 0.95 ±0.05 1.80 ±0.05 1.50 +0.10, -0.0 1.75 ±0.10 6.25 ±0.30 3.50 ±0.05 0.75 min. 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 0.060 ±0.05 8.00 ±0.20 Product characteristics 6 Operating temperature -40°C to 85°C , with proper derating factor applied Storage temperature -40°C to 85°C Load humidity MIL-STD-202G, Method 103B (1000 hr @ 85°C / 85% RH & 10% rated current) Moisture resistance MIL-STD-202, Method 106E (50 cycles) Thermal shock MIL-STD-202, Method 107D (-65°C to +125°C, 100 cycles) Vibration test MIL-STD-202, Method 204D, Test Condition D (10-2,000Hz) Mechanical shock resistance MIL-STD-202, Method 213B (3000G / 0.3ms) Salt spray resistance MIL-STD-202, Method 101, Test Condition B (48 hr exposure) Insulation resistance The insulation resistance after breaking capacity test is higher than 0.1MW when measured by 2X rated voltage Solderability J-STD-002C Method B1 (Dip and Look Test), Method G1 (Wetting Balance Test), Method D (Resistance to Dissolution / Dewetting of Metalization) Resistance to soldering heat MIL-STD-202, Method 210F (Solder dip - 260°C, 60 seconds / Solder Iron - 350°C, 3-5 seconds) High temperature life test MIL-STD-202G, Method 108A (1000 Hours @ 70°C & 60% rated current) Resistance to solvents MIL-STD-202, Method 215K www.eaton.com/elx CC06H Series High I2t Chip™ 0603 size fuses Technical Data 4346 Effective June 2014 Solder reflow profile TP TC -5°C tP Max. Ramp Up Rate = 3°C/s Max. Ramp Down Rate = 6°C/s Temperature 25°C T smax Volume mm3 <350 235°C 220°C Package Thickness <2.5mm _2.5mm > TL Preheat A Table 1 - Standard SnPb Solder (T c) t Volume mm3 _350 > 220°C 220°C Table 2 - Lead (Pb) Free Solder (T c) Tsmin Package Thickness <1.6mm 1.6 – 2.5mm >2.5mm ts Time 25°C to Peak Volume mm3 <350 260°C 260°C 250°C Volume mm3 350 - 2000 260°C 250°C 245°C Volume mm3 >2000 260°C 245°C 245°C Time Reference JDEC J-STD-020D Profile Feature Preheat and Soak Standard SnPb Solder 100°C • Temperature min. (Tsmin) • Temperature max. (Tsmax) • Time (Tsmin to Tsmax) (ts) Average ramp up rate Tsmax to Tp Liquidous temperature (TL) Time at liquidous (tL) Peak package body temperature (TP)* Time (tp)** within 5 °C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25°C to Peak Temperature Lead (Pb) Free Solder 150°C 150°C 200°C 60-120 Seconds 60-120 Seconds 3°C/ Second Max. 3°C/ Second Max. 183°C 60-150 Seconds 217°C 60-150 Seconds Table 1 Table 2 20 Seconds** 30 Seconds** 6°C/ Second Max. 6°C/ Second Max. 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. North America Eaton’s Electrical Group Electronics Division 1225 Broken Sound Parkway NW Suite F Boca Raton, FL 33487-3533 Tel: 1-561-998-4100 Fax: 1-561-241-6640 Toll Free: 1-888-414-2645 Eaton’s Electrical Group Electronics Division P.O. Box 14460 St. Louis, MO 63178-4460 Tel: 1-636-394-2877 Fax: 1-636-527-1607 Europe Eaton’s Electrical Group Electronics Division Burton-on-the-Wolds Leicestershire, LE 12 5th UK Phone: +44 (0) 1509 882 600 Fax: +44 (0) 1509 882 786 Eaton’s Electrical Group Electronics Division Avda Santa Eulalia, 290 Terrassa, Barcelona 08223 Spain Phone: +34-93-736-2813 Fax: +34-93-783-5055 Asia Pacific Eaton’s Electrical Group Electronics Division No.2, #06-01 Serangoon North Avenue 5 Singapore 554911 Tel: +65 6645 9888 Fax: +65 6728 3155 The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton’s Electrical Group Electronics Division 114 Old State Road Ellisville, MO 63021 United States www.eaton.com/elx © 2014 Eaton All Rights Reserved Publication No. 4346 — BU-SB14476 June 2014 Eaton is a registered trademark. All other trademarks are property of their respective owners. www.eaton.com/elx 7