DS9637A Dual Differential Line Receiver General Description Features The DS9637A is a Schottky dual differential line receiver which has been specifically designed to satisfy the requirements of EIA Standards RS-422 and RS-423. In addition, the DS9637A satisfies the requirements of MIL-STD 188-114 and is compatible with the International Standard CCITT recommendations. The DS9637A is suitable for use as a line receiver in digital data systems, using either single ended or differential, unipolar or bipolar transmission. It requires a single 5V power supply and has Schottky TTL compatible outputs. The DS9637A has an operational input common mode range of ±7V either differentially or to ground. ■ ■ ■ ■ ■ ■ ■ ■ ■ Dual channel Single 5V supply Satisfies EIA standards RS-422 and RS423 Built-in ±35 mV hysteresis High input common mode voltage range High input impedance TTL compatible outputs Schottky technology Extended temperature range Connection Diagram 8–Lead DIP and SO-8 Package 962101 Top View Order Number DS9637ACM or DS9637ACN See NS Package Number M08A or N08E For Complete Military Product Specifications, refer to the appropriate SMD or MDS. Order Number DS9637AMJ/883 See NS Package Number J08A © 2007 National Semiconductor Corporation 9621 www.national.com DS9637A Dual Differential Line Receiver December 6, 2007 DS9637A Differential Input Voltage Output Potential to Ground Output Sink Current ESD Susceptibility, HBM Absolute Maximum Ratings (Note 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Storage Temperature Range Ceramic DIP −65°C to + 175°C Molded DIP −65°C to + 150°C Lead Temperature Ceramic DIP (Soldering, 30 seconds) 300°C Molded DIP and SO Package (Soldering, 10 seconds) 265°C Maximum Power Dissipation (Note 1) at 25°C Cavity Package 1300 mW Molded Package 930 mW SO Package 810 mW VCC Lead Potential to Ground −0.5V to 7.0V Input Potential to Ground ±15V ±15V −0.5V to +5.5V 50 mA ≥2 kV Recommended Operating Conditions DS9637AM Supply Voltage (VCC) Operating Temperature (TA) DS9637AC Supply Voltage (VCC) Operating Temperature (TA) Min 4.5 −55 Max 5.5 +125 Units V °C 4.75 0 5.25 +70 V °C Note 1: Derate cavity package 8.7 mW/°C above 25°C; derate molded DIP package 7.5 mW/°C above 25°C; derate SO package 6.5 mW/°C above 25° C. Electrical Characteristics (Notes 3, 4) Over recommended operating temperature and supply voltage ranges, unless otherwise specified Symbol VTH Parameter Differential Input Conditions Max Units −7.0V ≤ VCM ≤ +7.0V −0.2 Min Typ +0.2 V −7.0V ≤ VCM ≤ +7.0V −0.4 +0.4 V mA Threshold Voltage (Note 6) VTH(R) Differential Input Threshold Voltage (Note 7) Input Current VI = 10V, 0V ≤ VCC ≤ +5.5V 1.1 3.25 (Note 8) VI = −10V, 0V ≤ VCC ≤ +5.5V −1.6 −3.25 VOL Output Voltage LOW IOL = 20 mA, VCC = Min 0.35 0.5 VOH Output Voltage HIGH IOH = −1.0 mA, VCC = Min 2.5 3.5 IOS Output Short Circuit VO = 0V, VCC = Max −40 −75 −100 mA 35 50 mA II V V Current (Note 5) ICC Supply Current VCC = Max, VI+ = 0.5V, VI− = GND VHYST Input Hysteresis VCM = ±7.0V (See Curves) 70 mV Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation. Note 3: Unless otherwise specified Min/Max limits apply across the −55°C to +125°C temperature range for DS9637AM and across the 0°C to +70°C range for the DS9637ASC. All typicals are given for VCC = 5V and TA = 25°C. Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are referenced to ground unless otherwise specified. Note 5: Only one output at a time should be shorted. Note 6: VDIFF (Differential Input Voltage) = (VI+) − (VI−). VCM (Common Mode Input Voltage) = VI+ or VI−. Note 7: 500Ω ±1% in series with inputs. Note 8: The input not under test is tied to ground. Switching Characteristics VCC = 5.0V, TA = 25°C Symbol tPLH Parameter Propagation Delay Time Typ Max Units See AC Test Circuit Conditions Min 15 25 ns See AC Test Circuit 13 25 ns Low to High tPHL Propagation Delay Time High to Low www.national.com 2 DS9637A 962102 FIGURE 1. Equivalent Circuit Typical Input/Output Transfer Characteristics 962103 962104 3 www.national.com DS9637A AC Test Circuit and Waveforms 962105 Notes: CL includes jig and probe capacitance. All diodes are FD700 or equivalent. FIGURE 2. 962106 VI Amplitude: 1.0V Offset: 0.5V Pulse Width: 100 ns PRR: 5.0 MHz tr = tf ≤ 5.0 ns FIGURE 3. www.national.com 4 DS9637A Typical Applications 962107 Notes: RT ≥ 50Ω for RS-422 operation. RT combined with input impedance of receivers must be greater than 90Ω. FIGURE 4. RS-422 System Application (FIPS 1020) Differential Simplex Bus Transmission 5 www.national.com DS9637A Physical Dimensions inches (millimeters) unless otherwise noted Ceramic Dual-In-Line Package (J) Order Number DS9637AMJ/883 NS Package Number J08A Molded Surface Mount Package (M) Order Number DS9637ACM NS Package Number M08A www.national.com 6 DS9637A Molded Dual-In-Line Package (N) Order Number DS9637ACN NS Package Number N08E 7 www.national.com DS9637A Dual Differential Line Receiver Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Design Support Amplifiers www.national.com/amplifiers WEBENCH www.national.com/webench Audio www.national.com/audio Analog University www.national.com/AU Clock Conditioners www.national.com/timing App Notes www.national.com/appnotes Data Converters www.national.com/adc Distributors www.national.com/contacts Displays www.national.com/displays Green Compliance www.national.com/quality/green Ethernet www.national.com/ethernet Packaging www.national.com/packaging Interface www.national.com/interface Quality and Reliability www.national.com/quality LVDS www.national.com/lvds Reference Designs www.national.com/refdesigns Power Management www.national.com/power Feedback www.national.com/feedback Switching Regulators www.national.com/switchers LDOs www.national.com/ldo LED Lighting www.national.com/led PowerWise www.national.com/powerwise Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors Wireless (PLL/VCO) www.national.com/wireless THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2007 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Customer Support Center Email: [email protected] Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530-85-86 Email: [email protected] Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +49 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: [email protected] National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: [email protected] Tel: 81-3-5639-7560