LUXEON 3535 HV High voltage package that reduces system BOM while achieving high efficacy Introduction The LUXEON 3535 HV mid-power product is an SMD solution that comes in both 24V and 48V configurations. This 3535 high voltage architecture allows for freedom of design when an LED project requires less bulky, more efficient drivers and an ultimate cost down on the LED system. Available in the 3535 platform, it enables interchangeability with other 3535 products and is offered in 1/9th micro color binning structure. Features Benefits Key Applications • High voltage • Lower current, more efficient and • Downlights • Excellent current spreading cost effective driver • Indoor Area Lighting • High light output per package • Leads to better light extraction -- Wall Sconce • 1/9 micro color binning • Allows reduction in LED count -- Wall Pack • Enables tight color control LUXEON 3535 HV Datasheet DS206 ©2014 Philips Lumileds Lighting Company. • Lamps Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mechanical Dimensions and Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Relative Spectral Distribution vs. Wavelength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Relative Light Output Characteristics over Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Forward Current vs. Forward Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Typical Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Radiation Pattern in Cartesian Coordinate System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Radiation Pattern in Polar Coordinate System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Emitter Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Flux Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. i General Information Product Nomenclature LUXEON 3535 HV is tested and binned at Tj = 25°C with a drive current of 15 mA DC. The part number designation is explained as follows: L 1 3 5 - A A B B C D H V 0 0 0 0 1 Where: A — designates CCT (2700K = 27) B — designates CRI (70, 80 and 90) C — designates attribute ( 0 ) D — designates voltage (A=12V, B=24V, C=48V) For example, a white LUXEON 3535 HV 4000K/80 CRI 24V emitter has the following part number: L 1 3 5 – 4 0 8 0 0 W B H V 0 0 0 0 1 Average Lumen Maintenance Characteristics Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a specified period of time. Philips Lumileds projects that LUXEON 3535 HV products will deliver, on average, 70% lumen maintenance (L70) at >30,000 hours of operation at a forward current of up to 15 mA at Tj = 25°C. This projection and detailed operating condition will be further validated and disclosed respectively at the time of product launch. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3535 HV is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives. Philips Lumileds will not intentionally add the following restricted material to the LUXEON 3535 HV L135-XX800XHV00001: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 2 Product Selection Product Selection Guide for LUXEON 3535 HV LEDs Junction Temperature = 25°C Table 1. Luminous Flux (lm) [1] @ 15 mA Voltage Nominal CCT Minimum 24 2700K L135-27800BHV00001 37 24 3000K L135-30800BHV00001 39 24 4000K L135-40800BHV00001 42 Part Number Luminous Flux (lm) [1] @ 20 mA CRI [1] Rth (°C/W) Typical Typical Minimum Typical 41 53 80 25 43 55 80 25 48 60 80 25 24 5000K L135-50800BHV00001 42 48 60 80 25 48 2700K L135-27800CHV00001 71 80 102 80 14 48 3000K L135-30800CHV00001 75 84 107 80 14 48 4000K L135-40800CHV00001 83 93 120 80 14 48 5000K L135-50800CHV00001 83 93 120 80 14 Notes for Table 1: 1. Philips Lumileds maintains a tolerance of ± 7.5% on luminous flux and ± 2 on CRI measurements. 2. Forward voltage test tolerance: ± 0.1 volts. Electrical Characteristics Electrical Characteristics for LUXEON 3535 HV LEDs Test Current = 15 mA Table 2. Forward Voltage Vf (V) Minimum Typical Maximum Typical Temperature Coefficient of Forward Voltage between 25°C-85°C DVf / DTj L135-27800BHV00001 L135-30800BHV00001 L135-40800BHV00001 L135-50800BHV00001 22 24 26 -2.0 - 4.0 L135-27800CHV00001 L135-30800CHV00001 L135-40800CHV00001 L135-50800CHV00001 44 48 52 -2.0 - 4.0 Part Number LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 3 Absolute Maximum Ratings Table 3. Parameter DC Forward Current Maximum Performance 30 mA [1] Peak Pulsed Forward Current [2] 40 mA LED Junction Temperature [1] 125°C ESD Sensitivity < 2000V Human Body Model (HBM) Class 2A JESD22-A114-E Operating Case Temperature at 15 mA -40°C - 105°C Storage Temperature -40°C - 105°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vr) n/a Notes for Table 3: 1. Ripple current with a frequency of 50-150 Hz is allowed as long as the average of the current waveform is below 30 mA and the maximum of the current waveform is lower than 40mA. 2. At 10% duty cycle and pulse width 10ms. 3. LUXEON 3535 HV LEDs are not designed to be driven in reverse bias. 4. At a maximum reverse current of 10 μA. JEDEC Moisture Sensitivity Table 4. 2 Soak Requirements Standard Floor Life Level Time Conditions Time Conditions 1 year [ 30°C / 60% RH 168 Hrs. ± 5/0 Hrs. [85°C / 60% RH LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 4 Reflow Soldering Characteristics Figure 1. Temperature profile for Table 5. Table 5. Reflow Profile in Accordance with J-Std-020D Profile Feature Lead Free Assembly Preheat/Soak: Temperature Min (Tsmin ) Temperature Max (Tsmax ) Maximum Time (ts) from Tsmin to Tsmax 150°C 200°C 120 seconds Ramp–up Rate (TL to Tp ) 3°C / second Liquidous Temperature ( TL ) 217°C Maximum Time (tL ) Maintained TL 150 seconds Maximum Peak Package Body Temperature (Tp ) 260°C Time (tp ) within 5°C of the specified temperature (Tc ) 10 - 30 seconds Maximum Ramp-Down Rate (Tp to TL ) 6°C / second Maximum Time 25°C to Peak Temperature 8 minutes Notes for Table 5: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 5 Mechanical Dimensions and Package Information 2.6 Cathode Anode 3.50±0.15 2.7 3.40±0.15 Part Mark Cathode 1.9 0.8 3.7 MAX 0.3 0.8 Figure 2. Notes for Figure 2: 1. All dimensions are in millimeters. 2. Tolerance ± 0.10mm. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 6 Solder Pad Design Figure 3. Solder pad layout. Notes for Figure 3: 1. The drawing above shows the recommend solder pad layout on the Printed Circuit Board (PCB). 2. All dimensions are in millimeters. 3. Application Brief AB203 provides details for this layout. In addition, the .drawing files are available at www.philipslumileds.com and www.philipslumileds.cn.com. Package Information Table 6. Package Information for L135-xx80-0xHV-00001 Material/Component Specification Lead Frame Base Package Body Encapsulate Weight Copper Alloy High Temperature Thermal Plastic Silicone Resin, with Phosphor 0.08gram LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 7 Characteristic Curves Relative Spectral Distribution vs. Wavelength Junction Temperature = 25°C; Test Current = 15 mA Figure 4. Color spectrum, L135-xx80-0xHV-00001. Relative Light Output Characteristics over Junction Temperature Test Current = 15 mA Figure 5. Relative light output vs. junction temperature, L135-xx80-0xHV-00001. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 8 Typical Forward Current Characteristics Forward Current vs. Forward Voltage for L135-xx80-0BHV-00001 Junction Temperature = 25°C Figure 6. Typical forward current vs. forward voltage, L135-xx80-0BHV-00001. Forward Current vs. Forward Voltage for L135-xx80-0CHV-00001 Junction Temperature = 25°C Figure 7. Typical forward current vs. forward voltage, L135-xx80-0CHV-00001. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 9 Typical Light Output Characteristics Relative Light Output vs. Forward Current Junction Temperature = 25°C Figure 8. Relative light output vs. forward current, L135-xx80-0xHV-00001. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 10 Typical Radiation Patterns Radiation Pattern in Cartesian Coordinate System Junction Temperature = 25°C Figure 9. Typical spatial radiation pattern, L135-xx80-0xHV-00001. Radiation Pattern in Polar Coordinate System Junction Temperature = 25°C Figure 10. Typical polar radiation pattern, L135-xx80-0xHV-00001. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 11 Emitter Packaging Emitter Pocket Tape Packaging Figure 11. Emitter pocket tape packaging. Notes for Figure 11: 1. All dimensions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. The maximum number of consecutive missing LEDs is two. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 12 Emitter Reel Packaging 329 100 +/-0.5 13,1 +0,5 -0,2 18.4 (max, measure at hub) 1.5 n mi +2 12,4-0 Figure 12. Emitter reel packaging. Notes for Figure 12: 1. All dimensions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. 13 inch reel-5000 pieces per reel. 4. Minimum packing quantity is 5000 pieces. 5. The maximum number of consecutive missing LEDs is two. 6. In accordance with EIA-481-1-B specification. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 13 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). Decoding Product Bin Labeling LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels of 2700K, 3000K, 3500K, 4000K, 5000K emitters are labeled with the CAT code following the format below. ABCD Where: A — Flux bin (L etc.) B & C— Color bin (For example E, D, G, H, I, J, K, L, M ) D Vf bin — Luminous Flux Bins Table 7 and Table 8 list the standard photometric luminous flux bins for LUXEON mid-power emitters (tested and binned at 15 mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Please contact your Philips Lumileds representative for the L135-xx80-xBHV-00001 & L135-xx80-xCHV-00001 flux bins. Flux Bin Labeling Table 7. Flux Bins for L135-xx80-0BHV-00001 Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) K 28 32 L 32 36 M 36 40 P 40 44 Q 44 48 R 48 52 S 52 56 Note for Table 7: 1. Tested and binned at 25°C, If = 15 mA. Tester tolerance: ± 7.5%. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 14 Flux Bins Table 8. Flux Bins for L135-xx80-0CHV-00001 Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) B 60 65 70 C 65 D 70 75 E 75 80 F 80 85 G 85 90 H 90 95 Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) F 22.0 22.8 Note for Table 8: 1. Tested and binned at 25°C, If = 15 mA. Tester tolerance: ± 7.5%. Forward Voltage Bins Table 9. Vf Bins for L135-xx80-0BHV-00001 G 22.8 23.6 H 23.6 24.4 I 24.4 25.2 J 25.2 26.0 Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) 45.6 Note for Table 9: 1. Tested and binned at 25°C, If = 15 mA. Table 10. Vf Bins for L135-xx80-0CHV-00001 L 44.0 M 45.6 47.2 P 47.2 48.8 Q 48.8 50.4 R 50.4 52.0 Note for Table 10: 1. Tested and binned at 25°C, If = 15 mA. LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 15 Color Bin Structure L135-2780-0xHV-00001 Color Bin Structure Figure 13. 2700K 1/9th color bin structure. Table 11. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. Minor Axis, b Ellipse Rotation Angle 0.00810 0.00420 53.70° 0.01350 0.00700 53.70° 16 Color Bin Structure, Continued L135-2780-0xHV-00001 Color Bin Structure Figure 14. 3000K 1/9th color bin structure. Table 12. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a 3000K Single 3-step MacAdam ellipse (0.4338, 0.403) 3000K Single 5-step MacAdam ellipse (0.4338, 0.403) LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. Minor Axis, b Ellipse Rotation Angle 0.00834 0.00408 53.22° 0.01390 0.00680 53.22° 17 Color Bin Structure, Continued L135-4080-0XHV-00001 Color Bin Structure Figure 15. 4000K 1/9th color bin structure. Table 13. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72° 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.72° LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. 18 Color Bin Structure, Continued L135-5080-0XHV-00001 Color Bin Structure Figure 16. 5000K 1/9th color bin structure. Table 14. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company. Minor Axis, b Ellipse Rotation Angle 0.00822 0.00354 59.62° 0.01370 0.00590 59.62° 19 Who We Are Philips Lumileds focuses on one goal: Creating the world’s highest performing LEDs. The company pioneered the use of solid-state lighting in breakthrough products such as the first LED backlit TV, the first LED flash in camera phones, and the first LED daytime running lights for cars. Today we offer the most comprehensive portfolio of high quality LEDs and uncompromising service. Philips Lumileds brings LED’s qualities of energy efficiency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retrofit lamps. Our products are engineered for optimal light quality and unprecedented efficacy at the lowest overall cost. By offering LEDs in chip, packaged and module form, we deliver supply chain flexibility to the inventors of next generation illumination. Philips Lumileds understands that solid state lighting is not just about energy efficiency. It is about elegant design. Reinventing form. Engineering new materials. Pioneering markets and simplifying the supply chain. It’s about a shared vision. Learn more about our comprehensive portfolio of LEDs at www.philipslumileds.com. RoHS No. E352519 COMPLIANT Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2014 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON 3535 HV Datasheet DS206 20140305