MEDICAL & MILITARY MI-200 Series 5 0 - 1 0 0 W AT T S M I L I TA R Y C O T S D C / D C C O N V E R T E R Features • • • • • • • 28Vdc Inputs per MIL-STD-704D/E/F 155Vdc Inputs per MIL-STD-1399A 270Vdc Inputs per MIL-STD-704D/E/F MIL-STD-810 environments OVP and Thermal shutdown Power boosters for higher power Low noise FM control Specifications STANDARDS AND APPROVALS INPUT Input Voltage No Load Power Dissipation Environment (MIL-STD-8100) See input voltage chart Typ 1.35W OUTPUT 70,000 feet Humidity – Method 507.2 86/240 (% /hours) Acceleration – Method 513.3 Set point accuracy 0.5% V nom typical Load/Line regulation 0.05% V nom typical. 10% to full load Output temperature drift 0.01%/°C Output noise 1%pp V nom Output Voltage Trimming 50% - 110% Remote Sense Compensation Altitude – Method 500.2 105% - 125% Short Circuit Current 20% - 130% Vibration – Method 514.3 20g’s Shock – Method 516.3 40g’s Reliability (MIL-HDBK-217F) 0.5 V Current limit 25°C Ground Benign 3,277,000 hours 50°C Naval Sheltered 1,999,000 hours 65°C Airborne inhabited cargo 1,540,000 hours Derating NAVMAT P-4855-1A C-Tick AS/NZS2064:1997 Group 1 Class AEMC filters supplied with some models OPERATING Isolation Efficiency 9 g’s Input - Output 3,000Vrms Output to Baseplate 500Vrms Input to Baseplate 1,500Vrms 80 – 90% ENVIRONMENTAL MECHANICAL Weight 170 grams Dimensions 116.8 x 61 x 12.7mm Selection Table I Grade M Grade Storage Temperature -55°C to +100°C -65°C to +100°C Operating Temperature (baseplate) -40°C to +85°C -55°C to +85VC Power Cycling Burn-in 12hrs 25 cycles Temperature Cycled With Power off Test Data Supplied at these temperature MI-2(A)(B)-(C)(D) A = INPUT VOLTAGE B = OUTPUT VOLTAGE VNOM RANGE TRANS. 2= 28V 18–50V (1) 60V Z=2V 96hrs 200 cycles 5= 155V 100–210V 230V Y= 3.3V 48 hrs, 12cycles -65°C to +100°C 48hrs, 12cycles -65°C to +100°C 6= 270V 125–400V (2) 475V -40°C to +80°C -55°C to +80°C Note: For Technical Illustration refer to page 230 in Module Section 7= 165V 100–310V 2 = 15V R = 7.5V N = 18.5V 0= 5V M = 10V 3 = 24V X= 5.2V 1 = 12V L = 28V V= 5.8V C = PRODUCT GRADE T = 6.5V K = 40V J = 48V P = 13.8V J = 36V D = OUTPUT POWER/CURRENT ⭓5V <5V I= -40°C to +85°C Y = 50W Y = 10A M=-55°C to +85°C X = 75W X = 15A W = 100W W = 20A V= – V = 30A Note :(1) 16V operation at 75% load. (2) These units rated at 75% load from 125-150Vin: MI-26Z-XV, MI-26Y-XV, MI-260-XW. 372