Z4KE100 THRU Z4KE200A GLASS PASSIVATED ZENER Zener Voltage - 100 to 200 Volts Steady State Power - 1.5 Watts FEATURES DO-204AL ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Low Zener impedance ♦ Low regulation factor ♦ Glass passivated junction ♦ High temperature soldering guaranteed: 260°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) MECHANICAL DATA Case: JEDEC DO-204AL molded plastic over passivated junction Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.012 ounce, 0.3 gram 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. OPERATING JUNCTION AND STORAGE TEMPERATURE RANGE: TJ, TSTG: -55°C to +150°C TYPE Z4KE100 Z4KE100A Z4KE110 Z4KE110A Z4KE120 Z4KE120A Z4KE130 Z4KE130A Z4KE140 Z4KE140A Z4KE150 Z4KE150A Z4KE160 Z4KE160A Z4KE170 Z4KE170A Z4KE180 Z4KE180A Z4KE190 Z4KE190A Z4KE200 Z4KE200A ZENER VOLTAGE at 5.0mA MAXIMUM ZENER DYNAMIC IMPEDANCE MAXIMUM CONTINUOUS REGULATOR CURRENT (1) VZ (Volts) MIN MAX IZT (mA) ZZT (Ohms) IZK (mA) ZZK (Ohms) VR (Volts) IR @ 25°C (µA) IR 100°C (µA) VFM (Volts) IZM (µA) 90 95 99 104 108 114 117 124 126 133 135 142 144 152 153 162 162 171 171 180 180 190 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 500 500 600 600 700 700 800 800 900 900 1000 1000 1100 1100 1200 1200 1300 1300 1400 1400 1500 1500 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5000 5000 5000 5000 5000 5000 5000 5000 5000 5500 6000 6000 6500 6500 7000 7000 7000 7000 7500 7500 8000 8000 72.0 76.0 79.2 83.2 86.4 91.2 93.6 99.2 100 106.4 108.0 113.6 115.2 121.6 122.4 129.6 129.6 136.8 136.8 144.0 144.0 152.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 15.0 15.0 13.0 13.0 12.0 12.0 11.0 11.0 10.7 10.7 10.0 10.0 9.0 9.0 8.8 8.0 8.0 8.0 7.9 7.9 7.0 7.0 110 105 121 116 132 126 143 137 154 147 165 158 176 168 187 179 198 189 209 200 220 210 NOTES: (1) Standard voltage tolerance is ±10%, suffix "A" is ± 5% (2) Temperature rating at specified regulator current is TL=30°C (3) Maximum steady state power dissipation is 1.5 watts at TL=75°C with lead length 0.375" (9.5mm) 1/20/99 MAXIMUM DC REVERSE LEAKAGE CURRENT AT VR MAXIMUM INSTANTANEOUS FORWARD VOLTAGE at 0.50A RATINGS AND CHARACTERISTICS CURVES Z4KE100 THRU Z4KE200A FIG. 2 - TYPICAL ZENER IMPEDANCE 1.5 10,000 60 HZ RESISTIVE OR INDUCTIVE LOAD ZZ, DYNAMIC IMPEDANCE, OHMS PM(AV), AVERAGE POWER DISSIPATION, WATTS FIG.1 - MAXIMUM CONTINUOUS POWER DISSIPATION 1.125 L=0.375” (9.5mm) 0.75 0.8 x 0.8 x 0.04” (20 x 20 x 7mm) 0.375 0 25 50 75 100 125 150 TJ=25°C IZ (ma ± 0.1 IZ(dc) VZ=200V 1,000 VZ=180V VZ=150V 100 VZ=100V 10 0.5 500 100 10 1 175 IZT, ZENER TEST CURRENT, mA TL, LEAD TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPS 10 1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 TJ=100°C 1 0.1 TJ=25°C 140 0.01 0 20 40 60 80 100 PERCENT OF RATED ZENER VOLTAGE, % 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 6 - TYPICAL ZENER VOLTAGE 10 220 200 TESTED at RATED IZT 180 160 140 120 100 80 100 110 120 130 140 150 160 170 180 190 200 VZ, ZENER VOLTAGE, VOLTS IZT, TEST ZENER CURRENT, mA ΘVZ TEMPERATURE COEFFICIENT, mV/°C FIG. 5 - TYPICAL TEMPERATURE COEFFICIENTS 1 0.1 100 150 200 VZ, ZENER VOLTAGE, VOLTS 250 120