LLB005 THRU LLB10 SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT FLAT BRIDGE RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURE LBF Ideal for printed circuit board Glass passivated chip Reliable low cost construction utilizing molded plastic technique High surge current capability Small size, simple installation High temperature soldering guaranteed: 260℃/10 seconds/0.375” lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case:UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Maximum Recurrent Peak Reverse Voltage Vrrm LLB 005 50 Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 V Maximum DC blocking Voltage Maximum Average Forward on aluminum substrate Rectified Current on glass-epoxy P.C.B. Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 0.4A Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Thermal resistance junction to lead on aluminum substrate on glass-epoxy P.C.B. Storage and Operating Junction Temperature Range VDC 50 100 200 400 1.0 0.8 600 800 1000 V Symbol If(av) LLB 01 100 LLB 02 200 LLB 04 400 LLB 06 600 LLB 08 800 LLB 10 1000 V A Ifsm 30.0 A Vf 0.95 V 5.0 100.0 25 62.5 80 -55 to +150 µA Ir Rth(jl) Rth(ja) Tstg, Tj ℃/W ℃ Note: Rev.A1 Units www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES LLB005 THRU LLB10 Rev.A1 www.gulfsemi.com