Hirose MQ138-M-16S-CVR Universal plug connectors for pdc type digital cellular phone Datasheet

NEW
Universal Plug connectors for PDC Type Digital Cellular Phones
MQ138 Series
Thin and short cover plug
Short cover plug
■Overview
The universal plug connectors will mate with most PDC type
digital cellular phones.
The major use of these connectors is for the connections of
cellular phones with peripheral equipment.
Three out of 16 contacts are removed from the housing for
protection purpose of the cellular phones.
Standard cover plug
■Features
1. Will interface with NTT DoCoMo, Vodafone
and Tu-Ka cellular phones.
2. Variations
Thin and short cover plugs, short cover plugs, and
reverse cover plugs are available. Plugs with colors not
listed in the catalog can be custom made.
Please contact our sales representative for details.
3. Easy Wire Termination
The lock spring and release buttons are incorporated in
the outer shell, allowing easy placement of the
terminated insulator, strain relief clamp and flexible boot.
■Applications
Example of Connections with Peripheral Equipment
PDC digital cellular phone
PDC type digital cellular phones
Notebook PC
MQ138-M-16(13)S-CV
2004.3
1
■Specifications
Rating
Current rating
1A
Voltage rating
100V AC
Characteristic
Operating temperature range -55ç to +80ç (Note 1)
Specification
11. Contact resistance
12. Insulation resistance
13. Dielectric Withstanding Voltage
14. Lock Strength
15. Mating/un-mating forces
16. Durability
(mating/un-mating)
30 m ohms max.
1000 M ohms min.
No flashover or insulation breakdown.
No damage, cracks, or parts dislocation.
Mating : 29.4N max.
Contact resistance: 50 m ohms max.
No damage, cracks or parts dislocation.
17. Vibration
No electrical discontinuity of 10É sec. max.
Contact resistance: 50 m ohms max.
No damage, cracks, or parts dislocation.
18. Shock
Contact resistance: 50 m ohms max.
19. Temperature cycle Insulation resistance: 1000 M ohms min.
No damage, cracks, or parts dislocation.
Contact resistance: 50 m ohms max.
Insulation resistance: 10 M ohms min.
10. Humidity
No damage, cracks, or parts dislocation.
Contact resistance: 50 m ohms max.
11. Salt Spray
No corrosions
Conditions
10 mA (DC or 1000 Hz)
250 V DC
350 V AC / one minute
Pull force: 30N max.
With corresponding connector.
5000 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours, 3 axis.
Acceleration of 490 m/s2, 11 ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis.
Temperature : -55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç
Time (Minutes) : 30 ➝ 5 ➝ 30 ➝ 5
5 cycles
96 hours at temperature of 40ç and humidity of 90% to 95%
5% salt water solution for 48 hours
No deformation of the insulator parts affecting form, fit or Soldering temperature: 280ç to 300ç
function.
Recommended solder immersion time: 4 seconds max.
12. Solderability
Note: Includes temperature rise caused by current flow.
■Materials
Component
Material
Finish
Remarks
Insulator
Polyamide
Color: Black or Brown
UL94V-0
Female contacts
Copper alloy
Gold plating
-------------------
Cover
Polycarbonate or ABS
Color: Black (Note1)
-------------------
Lock Push Button
Thermoplastic compound
Color: Light gray
-------------------
Lock spring
Stainless steel
-------------------
-------------------
Note1: Outer shells available in various colors. Refer to page 3.
■Ordering Information
MQ138 T - M - 16 (13) S - CV
1
2
1 Series name
3
4
: MQ138 Series
2 Plug length
6
4 Number of contact
5 Contact type
13
S: Female contact
6 Plug type
Blank
: Standard
T
: Thin and Short
CV
: Standard type
: Short
CVR
: Reverse type
S
3 Connector type
2
5
M :Universal Plug
■Thin and short cover type
(4.2)
(5.4)
5.4
5
(10.5)
17.5
(20)
4.8
(16)
18.9
20.4
Color of outer housings
Part Number
CL No.
Gray
MQ138T-M-16(13)S-CV
CL206-2252-9
Ivory White
MQ138T-M-16(13)S-CV(03)
CL206-2252-9-03
No.7
No.1
No.15
No.9
■Short cover type
(Ø
5)
(25)
5)
7
5
(2.2)
(14)
19.5
(R
(17)
(18.9)
23
Marking
Cover Color
Gray
MQ138S-M-16(13)S-CV1
CL206-2157-8
NTT
Black
MQ138S-M-16(13)S-CV1(01)
CL206-2157-8-01
Light Gray
MQ138S-M-16(13)S-CV1(02)
CL206-2157-8-02
Ivory White
MQ138S-M-16(13)S-CV1(03)
CL206-2157-8-03
Gray
MQ138S-M-16(13)S-CV2
CL206-2191-6
DoCoMo
Vodafone
or
Tu-Ka
No marking
Part Number
CL No.
Black
MQ138S-M-16(13)S-CV2(01)
CL206-2191-6-01
Light Gray
MQ138S-M-16(13)S-CV2(02)
CL206-2191-6-02
Ivory White
MQ138S-M-16(13)S-CV2(03)
CL206-2191-6-03
Gray
MQ138S-M-16(13)S-CV
CL206-2192-9
Black
MQ138S-M-16(13)S-CV(01)
CL206-2192-9-01
Ivory White
MQ138S-M-16(13)S-CV(03)
CL206-2192-9-03
No.7
No.1
No.15
No.9
BRemarks[Thin and short cover plugs and Short cover plugs]
1 Thin and short cover plugs, and short
cover plugs will not accept coaxial
connectors. Use standard cover plugs for
installing coaxial connectors.
2 The short cover plugs will not be supplied
with the cable bushing. The cable bushing
needs to be integrately molded to the
cable. Refer to the customer drawing for
recommended dimensions.
3 Power contacts are removed from the
housing.
3
■Standard cover type
(Ø
7.
4)
10
5
(3)
(14)
32
(R
3)
(16)
(17)
(18.9)
23
Connector type
Part Number
CL No.
Standard type
MQ138-M-16(13)S-CV
CL206-0749-6
Reverse type
MQ138-M-16(13)S-CVR
CL206-2031-0
■Cable bushing(For standard cover only)
No.7
No.1
No.15
No.9
■Standard cover type
D
E
C
B
A
Part Number
CL No.
4mm
MQ138-BS(4.0)(01)
CL206-0890-4-01
4.8mm
MQ138-BS(4.8)(01)
CL206-0683-0-01
5.2mm
MQ138-BS(5.2)(01)
CL206-0662-0-01
■Clamp
A
Option
Cable Dia.
B
C
D
E
Plug
Strain Relief Clamp
Flexible Boot
Label
Coaxial contact
■Coaxial contact
Cable Dia.
Part Number
CL No.
4mm
MQ138-CM(4.0)
CL206-0891-7
4.8mm
MQ138-CM(4.8)
CL206-0684-2
5.2mm
MQ138-CM(5.2)
CL206-0664-5
■Label
Applicable cable
Part Number
CL No.
Coaxial/signal combined cable
MS-138-C(P)-1
CL358-0088-3
Part Number
CL No.
1.5D-2W
MS-138-C(P)-1
CL358-0100-7
MQ138-M-LABEL
CL206-0769-3
0.8D-2W
MS-138-C(P)-2
CL358-0101-0
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
4
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
Similar pages