Low Current LTL1CHJxDNN 60 degree LTL2F7JxDNN 60 degree LTL2R3JxDNN 45 degree Features ! ! ! ! ! ! ! Low Power Consumption. High Efficiency. CMOS-MOS Compatible. TTL Compatible. Wide Viewing Angle. Choice of Package. Choice of Color Description These tinted diffuse LED lamps are designed and optimized specifically for low DC current operation. Luminous intensity and forward voltage are tested at 2mA to assure consistent brightness at TTL output current level. Application ! ! ! ! Low Power DC Circuits. Telecommunications Indicators. Portable Equipment. Keyboard Indicators. Devices Part No. (LTL) Lens Source Color 1CHJDDNN / 2F7JDDNN / 2R3JDDNN Red Diffused AlInGap Hyper Red 1CHJRDNN / 2F7JRDNN / 2R3JRDNN Red Diffused AlInGap Super Red 1CHJEDNN / 2F7JEDNN / 2R3JEDNN Red Diffused AlInGap Red 1CHJFDNN / 2F7JFDNN / 2R3FDNN Amber Diffused AlInGap Yellow Orange 1CHJYDNN / 2F7JYDNN / 2R3JYDNN Yellow Diffused AlInGap Amber Yellow 1CHJSDNN / 2F7JSDNN / 2R3JSDNN Yellow Diffused AlInGap Yellow 1CHJGDNN / 2F7JGDNN / 2R3JGDNN Green Diffused AlInGap Green !" Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. !" Absolute Maximum Ratings at TA=25°°C Hyper Red Super Red Red Yellow Orange Amber Yellow Yellow Green Unit 75 75 75 75 75 75 75 mW 90 90 90 60 60 60 60 mA Continuous Forward Current 30 30 30 30 30 30 30 mA Derating Linear From 70°C 0.4 0.4 0.4 0.4 0.4 0.4 0.4 mA / °C 5 5 5 5 5 5 5 V Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Reverse Voltage(IR =100 A) Operating Temperature Range -40°C to + 100°C Storage Temperature Range -55°C to + 100°C Lead Soldering Temperature 260 for 5 Seconds [1.6mm(.063") From Body] !" Electrical / Optical Characteristics at TA=25 (F Series) Parameter Luminous Symbol Iv Intensity Part No. (LTL) Min. Typ. 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 5.6 7.2 7.2 7.2 7.2 7.2 mcd 60 deg 2 θ1/2 Viewing Angle Peak Emission λP Wavelength Dominant λd Wavelength Spectral Line ∆λ Half-Width Forward Voltage VF Reverse Current IR Capacitance C 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 650 639 632 611 595 588 575 639 632 624 605 592 587 572 20 20 20 17 15 15 15 1.8 1.8 1.8 1.8 1.8 1.8 1.8 40 Max. Unit Test Condition IF = 2mA Note 1 Note 2 nm Note 3 (Fig.5) Measurement @ peak (Fig.1) nm Note 5 nm 2.4 2.3 2.4 2.4 2.4 2.4 2.4 V IF = 2mA 100 µA VR = 5V pF VF = 0, f = 1 MHz NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Luminous intensity rank classified products support two ranks. 3. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 4. Iv classification code is marked on each packing bag. 5. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. !" " Electrical / Optical Characteristics at TA=25 (H Series) Parameter Luminous Symbol Iv Intensity Part No. (LTL) Min. Typ. 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 5.6 7.2 7.2 7.2 7.2 7.2 mcd 60 deg 2 θ1/2 Viewing Angle Peak Emission λP Wavelength Dominant λd Wavelength Spectral Line ∆λ Half-Width Forward Voltage VF Reverse Current IR Capacitance C 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 650 639 632 611 595 588 575 639 632 624 605 592 587 572 20 20 20 17 15 15 15 1.8 1.8 1.8 1.8 1.8 1.8 1.8 40 Max. Unit Test Condition IF = 2mA Note 1 Note 2 nm Note 3 (Fig.5) Measurement @ peak (Fig.1) nm Note 5 nm 2.4 2.3 2.4 2.4 2.4 2.4 2.4 V IF = 2mA 100 µA VR = 5V pF VF = 0, f = 1 MHz NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Luminous intensity rank classified products support two ranks. 3. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 4. Iv classification code is marked on each packing bag. 5. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. !" # Electrical / Optical Characteristics at TA=25 (H Series) Parameter Luminous Symbol Iv Intensity Viewing Angle Peak Emission λP λd Wavelength Spectral Line Min. Typ. 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 3.8 3.8 3.8 3.8 3.8 3.8 3.8 7.2 8.0 10.6 10.6 10.6 10.6 10.6 mcd 45 deg 2 θ1/2 Wavelength Dominant Part No. (LTL) ∆λ Half-Width Forward Voltage VF Reverse Current IR Capacitance C 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 650 639 632 611 595 588 575 639 632 624 605 592 587 572 20 20 20 17 15 15 15 1.8 1.8 1.8 1.8 1.8 1.8 1.8 40 Max. Unit Test Condition IF = 2mA Note 1 Note 2 nm Note 3 (Fig.5) Measurement @ peak (Fig.1) nm Note 5 nm 2.4 2.3 2.4 2.4 2.4 2.4 2.4 V IF = 2mA 100 µA VR = 5V pF VF = 0, f = 1 MHz NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Luminous intensity rank classified products support two ranks. 3. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 4. Iv classification code is marked on each packing bag. 5. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. !" $ Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted) !"