Optoway GBS-7285-CXX0G 1 *********************************************************************************************************************************************************************** GBS-7285-CXX0G (RoHS Compliant) 5V / CWDM / 1.25 Gbps Single-Mode Gigabit Interface Converter (GBIC) ********************************************************************************************************************************************************************** FEATURES DESCRIPTION l 18-Wavelength CWDM GBIC Transceivers: 1270 nm to 1610 nm, each step 20 nm l Compliant with Gigabit Interface Converter (GBIC) Specification Rev. 5.5 l Compliant with specifications for IEEE-802.3z Gigabit Ethernet l 27 dB Link Budget at Least l Hot Pluggable Module with Duplex SC Connector l SCA-2 Host Connector l Single +5 V Power Supply l RoHS Compliant l Differential PECL Inputs and Outputs l TTL RX-LOS Output l Class 1 Laser International Safety Standard IEC-60825 Compliant The GBS-7285-CXX0G series optical transceivers meet the Gigabit Interface Converter (GBIC) specification Rev. 5.5. It satisfies the optical interface specifications defined in IEEE 802.3z Drift 5.0 for Gigabit Ethernet. There are eighteen center wavelengths available from 1270 nm to 1610 nm, each step 20 nm. A guaranteed minimum optical link budget of 27 dB is offered. The transmission distance is depended on the wavelength and loss of fiber. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL input / output logic interface is used. TTL RX-LOS output simplifies interface to external circuitry. A 20-pin SCA-2 host connector is used to connect the converter to the host system. APPLICATIONS l l l l Switch to Switch Interface High Speed Interface for File Servers Bus Extension Application Data Storage LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Gb/s) GBS-7285-CXX0 1.25/1.063 1000 BASE Power Budget (dB) > 27 Wavelength Package (nm) CWDM* SC GBIC Temp. (oC) 0 to 70 TX Power RX Sens. RoHS (dBm) (dBm) Compliant 5 to 0 -27 Yes o CWDM Wavelength (0 to 70 C) Central Min. Wavelength (nm) -C270 -C290 -C310 -C330 -C350 -C370 -C390 -C410 -C430 1264.5 1284.5 1304.5 1324.5 1344.5 1364.5 1384.5 1404.5 1424.5 Typ. (nm) Max. (nm) Central Wavelength Min. (nm) Typ. (nm) Max. (nm) 1270 1290 1310 1330 1350 1370 1390 1410 1430 1277.5 1297.5 1317.5 1337.5 1357.5 1377.5 1397.5 1417.5 1437.5 -C450 -C470 -C490 -C510 -C530 -C550 -C570 -C590 -C610 1444.5 1464.5 1484.5 1504.5 1524.5 1544.5 1564.5 1584.5 1604.5 1450 1470 1490 1510 1530 1550 1570 1590 1610 1457.5 1477.5 1497.5 1517.5 1537.5 1557.5 1577.5 1597.5 1617.5 CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway GBS-7285-CXX0G 2 *********************************************************************************************************************************************************************** Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Power Supply Voltage Input Voltage Relative Humidity Symbol Tstg Topr Vcc --- Min -40 0 -0.5 -0.5 Max 85 70 6 Vcc Units o C o C V V RH 5 95 % Min 4.75 Typ 5 200 Max 5.25 300 70 Notes With air flow 1m/sec Recommended Operating Conditions Parameter Power Supply Voltage Power Supply Current Operating Temperature Data Rate Symbol Vcc ITX + IRX Topr 0 1000 Units V mA o C / air flow 1m/sec Mb/s 1250 Transmitter Specifications (0 oC < Topr < 70 oC, 4.75V < Vcc < 5.25V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Coupled Power Ratio Optical Rise Time Optical Fall Time Relative Intensity Noise Max. Po at TX-Disable Asserted Electrical Differential Input Voltage Transmit Fault Load Transmit Fault Output-Low Transmit Fault Output-High TX-Disable Input - Low TX-Disable Input - High TX-Disable Assert Time TX-Disable Negate Time Time to initialize, includes reset of TX-FAULT TX FAULT from fault to assertion TX-Disable time to start reset Symbol Min Typ Max Units Po λ ∆λ ER CPR tr tf RIN 0 λ-5.5 --9 9 --λ ----- 5 λ+7.5 1 --0.26 0.26 -120 -35 dBm nm nm dB dB ns ns dB/Hz dBm VIH - VIL TX-FAULTLOAD VTX-FAULT-L VTX-FAULT-H V TX-DISABLE-L V TX-DISABLE-H t_off t-on t-int 0.65 4.7 0.0 Vcc – 0.5 0 2.0 2.0 10 0.5 Vcc + 0.3 0.8 Vcc + 0.3 10 1 300 Vp-p kΩ V V V V µs ms ms 100 µs t-fault t-reset 10 Notes 1 2 -20 dB Width 20% to 80% value 20% to 80% value 3 µs 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm. 3. Pull-up resistor on host Vcc. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway GBS-7285-CXX0G 3 *********************************************************************************************************************************************************************** Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V) Parameter Optical Sensitivity Maximum Input Power Signal detect – Hysteresis Wavelength of Operation Optical Return Loss RX-LOS – Asserted RX-LOS – Deasserted Electrical Differential Output Voltage Data Output Rise Time Data Output Fall Time RX-LOS of Light Load RX-LOS Output Voltage --- Low RX-LOS Outpu Voltage --- High RX-LOS Assert Time (off to on) RX-LOS Deassert Time (on to off) Symbol Min Typ Max Units Notes --Pin ---3 1.0 1100 12 ---36 --- -27 --- 4 4 ORL Pa Pd ±RX-DAT TrRX-DAT TfRX-DAT RX-LOSLOAD RX-LOSL RX-LOSH TA,RX-LOS TD,RX-LOS ----- 1620 ----- -27 --- dBm dBm dB nm dB dBm dBm 2.0 0.35 0.35 10 0.5 Vcc 100 100 Vp-p ns ns kΩ V V µs µs 0.37 4.7 0 2.4 Transition: low to high Transition: high to low 5 4. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS. 5. Pull-up resistor on host Vcc. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway GBS-7285-CXX0G 4 *********************************************************************************************************************************************************************** PIN ASSIGNMENT PIN Sequence Description 1 RX-LOS Signal Name 2 2 3 4 5 6 7 8 9 10 RGND RGND MOD-DEF(0) MOD-DEF(1) MOD-DEF(2) TX-DIABLE TGND TGND TX-FAULT 2 2 2 2 2 2 2 2 2 11 12 13 14 15 16 17 18 19 20 RGND -RX-DAT +RX-DAT RGND VCCR VCCT TGND +TX-DAT -TX-DAT TGND 1 1 1 1 2 2 1 1 1 1 Receiver Loss of Signal, logic high, open collector compatible, 4.7K to 10K ohm pull-up to VCCT on host Receiver Ground Receiver Ground TTL Low SCL Serial Clock Signal SDA Serial Data Signal Transmitter Disable, logic high, open collector compatible Transmitter Ground Transmitter Ground Transmitter Fault, logic high, open collector compatible, 4.7K to 10K ohm pull-up to V CCT on GBIC Receiver Ground Receiver Data Bar, Differential PECL, AC coupled Receiver Data, Differential PECL, AC coupled Receiver Ground Receiver +5V Supply Transmitter +5V Supply Transmitter Ground Transmitter Data, Differential PECL, AC coupled Transmitter Data Bar, Differential PECL, AC coupled Transmitter Ground A sequence value of 1 indicates that the signal is in the first group to engage during plugging of a module. A sequence value of 2 indicates that the signal is the second and last group. The two guide pins on the connector are electrically connected to the transceiver circuit ground. These two guide pins make contact with circuit prior to sequence 1 signals. Module Definition Module Definition 4 MOD-DEF(0) PIN 4 MOD-DEF (1) PIN 5 MOD-DEF (2) PIN 6 Interpretation by Host TTL Low SCL SDA Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway GBS-7285-CXX0G 5 *********************************************************************************************************************************************************************** PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0