E91207R Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Ountput Current 2.0A Features • • • • • • • Glass passivated fast recovery bridge rectifiers Ideal for automated placement Very low profile - max height 1.2 mm High surge current capability Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds Low forward voltage drop case:E91 Mechanical Data • Case:E91,Molding compound meets UL 94V-0 flammability rating • Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22B102, meets JESD 201 class 1A whisker test Typical Applications General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter, Printer,Audio equipment,and Home Applications application Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol E91207R Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average output rectified current VRRM VRMS VDC Io(AV) 1000 700 1000 2.0 V Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 85 A Rating for fusing (t≤8.3ms) Operating junction and storage temperature range I2t TJ, TSTG 30 A2s 150 °C Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Test Conditions Symbol Maximum instantaneous forward voltage IF=1A Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time TA=25℃ TA=125℃ IF=0.5A,IR=1.0A, Irr=0.25A IF=2A Typical junction capacitance 4.0 V, 1 MHz www.goodark.com V V A E91207R 1.1 VF 1.3 5.0 IR 100 Unit Volts µA trr 250 nS CJ 22 pF 1/4 2015.08-Rev.A E91207R Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Ountput Current 2.0A Thermal Characteristics (Ta=25℃ unless otherwixe noted) Parameter Test Conditions Symbol Typical thermal resistance1) juntion to ambient juntion to case E91207R RθJA RθJC Unit 35 ℃/W 10 Note:1),The thermal resistance from junction to ambient and case,mounted on glass epoxy FR-4 P.C.B Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Forward Current Derating Curve Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Pulse width=0.3ms Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com Figure 4. Typical Reverse Characteristics 2/4 2015.08-Rev.A E91207R Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Ountput Current 2.0A Package Outline Dimensions Unit:mm Dim Max Dim Min Max E1 4.98 5.18 A1 1.10 1.20 0.05 typ. HE 9.8 10.2 A2 0.05 typ. L1 0.9 1.1 B1 2.0 typ. L2 0.95 1.35 B2 2.0 typ. L3 5.65 6.05 A Min C 0.15 0.30 L4 1.8 2.2 D 8.10 8.40 L5 0.8 1.2 E 9.20 9.50 L6 0.8 1.2 Mounting Pad layout unit:mm www.goodark.com 3/4 2015.08-Rev.A E91207R Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Ountput Current 2.0A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.08-Rev.A