P-DUKE FDC10-48D15 10 watts dc-dc converter Datasheet

FDC10(W) SERIES
10 WATTS
DC-DC CONVERTER
FEATURES
• 10 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 2.5A
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 87%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY (300kHz)
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
NEGATIVE & POSITIVE LOGIC REMOTE ON/OFF
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FDC10 and FDC10-W series offer 10 watts of output power from a
2.0 x 1.0 x 0.4 inch package. FDC10 series have 2:1 wide input voltage of
9 ~ 18, 18 ~ 36 and 36 ~ 75VDC. FDC10-W series have 4:1 ultra wide
input voltage of 9 ~ 36 and 18 ~ 75VDC.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted.
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output power
Voltage accuracy
Single / Dual
Minimum load
Line regulation
± 1%
Single / Dual
± 0.2%
Single
± 0.5%
Load regulation
No Load to Full Load
Dual
± 1%
Cross regulation(Dual) Asymmetrical load 25% / 100% FL
± 5%
Single
Ripple and noise
20MHz bandwidth
See table
Dual
±0.02% / ºC, max.
Temperature coefficient
Transient response recovery time 25% load step change
3.3VDC output
Over voltage protection 5VDC output
Zener diode clamp
12VDC output
15VDC output
Over load protection
% of FL at nominal input
Short circuit protection
Efficiency
Isolation resistance
Input to Output
Input(Output) to Case
500VDC
Safety approvals
Case material
Dimensions
Weight
MIL-HDBK-217F
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
9 ~ 36VDC
18 ~ 75VDC
Pi type
36VDC 100ms, max.
50VDC 100ms, max.
100VDC 100ms, max.
30mAp-p
Input reflected ripple current
Nominal input and
Start up time
Power up
20ms
Constant resistive load
Remote ON/OFF (Option) (Note 6)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3.5V < Vr < 12V
Input current of remote control pin Nominal input
-0.5mA ~ +1mA
Remote off state input current
Nominal input
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
See table temperature
(Reference derating curve)
1600VDC, min. 1minute
1600VDC, min. 1minute Maximum case temperature
9
10 ohms, min. Storage temperature range
Non-conductive black plastic
Potting material
Page 1 of 3
12VDC input
24VDC input
48VDC input
Input surge voltage
300kHz±10% Thermal shock
IEC60950-1, UL60950-1, & EN60950-1 Vibration
Nickel-coated copper Relative humidity
Base material
MTBF (Note 1)
Input filter
300pF, max. Thermal impedance (Note 8)
Isolation capacitance
Switching frequency
250µs
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Isolation voltage
Input voltage range
0%
LL to HL at Full Load
12VDC nominal input
24VDC nominal input
48VDC nominal input
FDC10-W 24VDC nominal input
48VDC nominal input
FDC10
10 Watts, max.
Standard
-25ºC ~ +85ºC (with derating)
M1 (Note 7)
-40ºC ~ +85ºC (non-derating)
M2 (W series) -40ºC ~ +85ºC (with derating)
+105ºC
-55ºC ~ +125ºC
Nature convection
12ºC/watt
Nature convection with heat-sink 10ºC/watt
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
EMC CHARACTERISTICS
Epoxy (UL94 V-0) EMI (Note 9)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm) ESD
27g (0.95oz) Radiated immunity
3.342 x 106 hrs Fast transient (Note 10)
Surge (Note 10)
Conducted immunity
www.pduke.com
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Class B
± 8kV
Air
Contact
± 6kV
10 V/m
± 2kV
± 1kV
10 Vr.m.s
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
2014/4/30
FDC10(W) SERIES
10 WATTS
Model
Number
Input
Range
Output
Voltage
FDC10-12S33
FDC10-12S05
FDC10-12S12
FDC10-12S15
FDC10-12D05
FDC10-12D12
FDC10-12D15
FDC10-24S33 (W)
FDC10-24S05 (W)
FDC10-24S12 (W)
FDC10-24S15 (W)
FDC10-24D05 (W)
FDC10-24D12 (W)
FDC10-24D15 (W)
FDC10-48S33 (W)
FDC10-48S05 (W)
FDC10-48S12 (W)
FDC10-48S15 (W)
FDC10-48D05 (W)
FDC10-48D12 (W)
FDC10-48D15 (W)
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
DC-DC CONVERTER
(2)
(3)
Output Current
Output
No load
Min. load Full load Ripple & Noise Input Current
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
2000mA
2000mA
830mA
670mA
± 1000mA
± 416mA
± 333mA
2000(2500mA)
2000mA
830mA
670mA
± 1000mA
± 416mA
± 333mA
2000(2500mA)
2000mA
830mA
670mA
± 1000mA
± 416mA
± 333mA
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
75mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
75mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
75mVp-p
17mA
21mA
38mA
36mA
39mA
47mA
45mA
15(13mA)
22(11mA)
18(16mA)
36(26mA)
28(15mA)
24(15mA)
31(22mA)
11(10mA)
14(9mA)
14(9mA)
10(11mA)
16(12mA)
19(20mA)
16(20mA)
(4)
(5)
Eff
(%)
Capacitor
Load max
80
81
84
84
84
83
84
80(78)
82 (80)
84 (84)
84 (81)
83 (82)
85 (80)
84 (80)
80(76)
84 (81)
86 (84)
87 (84)
84 (82)
86 (78)
85 (81)
6800µF
4700µF
690µF
470µF
± 680µF
± 330µF
± 110µF
6800µF
4700µF
690µF
470µF
± 680µF
± 330µF
± 110µF
6800µF
4700µF
690µF
470µF
± 680µF
± 330µF
± 110µF
Note
1.
2.
3.
4.
5.
6.
MIL-HDBK-217F @Ta=25 ºC, Full load.
Typical value at nominal input and full load. (20MHz BW.)
Typical value at nominal input voltage and no load.
Typical value at nominal input voltage and full load.
Test by minimum input and constant resistive load.
The ON/OFF control pin voltage is referenced to -INPUT
To order positive logic ON/OFF control add the suffix-P (Ex: FDC10-12S05-P);
To order negative logic ON-OFF control add the suffix-N (Ex: FDC10-12S05-N)
7. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version.
8. Heat-sink is optional and P/N: 7G-0020C-F.
9. The FDC10 series standard module meets EN55022 Class A and Class B with external components.
For more detail information, please contact with P-DUKE.
10. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 F/100V.
μ
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Page 2 of 3
www.pduke.com
2014/4/30
FDC10(W) SERIES
10 WATTS
MECHANICAL DRAWING
DC-DC CONVERTER
:
PIN CONNECTION
PIN
SINGLE
DUAL
1
+ INPUT
+ INPUT
2
- INPUT
- INPUT
3
+ OUTPUT
+ OUTPUT
4
NO PIN
COMMON
5
- OUTPUT
- OUTPUT
6
CTRL(Option)
CTRL(Option)
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01 (0.25)
3. Pin dimension tolerance ±0.004 (0.1)
Page 3 of 3
www.pduke.com
2014/4/30
Similar pages