Omron G3VM-350 Electronic components master selection guide Datasheet

Electronic Components
Omron Electronic Components: The Quality, Flexibility and Global Support You Need
Master Selection Guide
For More Detailed Information…
Visit Us Online: www.components.omron.com
• Browse Omron’s full range of Product information and
selection guides.
• Download PDF’s — datasheets, brochures, and more.
• Find Omron solutions for competitive products.
• Locate a Distributor and search for available inventory.
Call Us:
1-847-882-2288 Monday through Friday,
7:30 a.m. to 6:00 p.m. Central Time (CT)
Relays
Switches
Photomicrosensors
Micro Sensors
Connectors
Email Us:
[email protected]
OMRON ELECTRONICS COMPONENTS LLC
55 Commerce Drive • Schaumburg, IL 60173
IT IS THE BUYER’S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS
FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL
BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR
PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION, END PRODUCT, OR SYSTEM.
BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE
FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR
ATTENTION MUST BE GIVEN:
(i) Outdoor use; uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment,
and installations subject to separate industry or government regulations.
(iv) Systems, machines, and equipment that could present a risk to life or property.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS
A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON
PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE.
YOI-E-03
© 2006 Omron Electronic Componenets
Printed in the U.S.A. 06/2006
REQUIRED PRECAUTIONS
www.components.omron.com
USAcovers.indd 2-3
7/14/06 2:42:48 PM
Relays - MOS FET
G3VM-200
G3VM-350
G3VM
High Voltage
& Dielectric
G3VM-400
General Attributes
Dimensions mm (in)
Relays - MOS FET
Features
Load voltage
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
• Broad product offering
• 1 & 2 channel
• Broad product offering
• Capable of switching
• 10kV surge withstand
configurations
• Form A & Form B
loads up to 600V
models available
• Ideal for Instrumentation,
configurations
(AC and DC)
Broadband Systems,
• Ideal for Instrumentation, • Ideal for Instrumentation, • 10kV surge withstand
Broadband Systems,
Measurement Devices,
Broadband Systems,
• Ideal for
Measurement Devices,
Data Loggers, Consumer
Measurement Devices,
Instrumentation,
Data Loggers, Consumer
Electronics, Medical
Data loggers, Consumer
Electronic Automatic
Electronics, Security
Equipment
Electronics, Security
Exchange Systems,
Systems, Electronic
Systems, Electronic
Industrial Automation
Automatic Exchange
Automatic Exchange
Systems, Measurement
Systems, Industrial
Systems, Industrial
Devices, Security
Automation Equipment,
Automation Equipment,
Systems, Medical
Medical Equipment
Medical Equipment
Equipment
G3VM
Current
Limiting
Please refer to specific
data sheets for all
dimensional information
• Current limiting of 150 to
300mA
• Ideal for Electronic
Automatic Exchange
Systems, Multi-function
Telephones, Cordless
Telephones, Measurement
Devices, Instrumentation
0-200V (AC or DC)
0-350V (AC or DC)
0-400V (AC or DC)
0-600V (AC or DC)
0-350V (AC or DC)
0-50mA & 0-200mA
0-90mA, 0-100mA,
0-110mA, 0-120mA,
0-150mA
0-120mA
0-100mA
0-120mA
5! & 30!
15!, 27!, 30!, 25!,
40!
17! & 18!
25!
22!
Output capacitance
_
_
_
_
_
Available switching
configurations
1 Form A, 2 Form A
1 Form A, 1 Form B,
1 Form A + 1 Form B
2 Form A, 2 Form B
1 Form A, 2 Form A
1 Form A
1 Form A, 2 Form A
10nA (max.) & 1.0µA (max.) 1.0µA (max.)
1.0µA (max.)
1.0µA (max.)
1.0µA (max.)
turn-ON time
(typical)
40ms & 600ms
0.1ms, 0.25ms,
0.3ms, 0.5ms,
1.0ms
0.3ms & 0.5ms
0.2ms
0.3ms & 0.5ms
turn-OFF time
(typical)
100ms
0.1ms, 0.15ms,
0.5ms, 1.0ms,
3.0ms
0.1ms & 0.5ms
0.2ms
0.3ms & 0.5ms
Dielectric strength (AC
for 1 minute between
input and output)
1,500Vrms (min.)
1,500Vrms (min.)
2,500Vrms (min.)
1,500Vrms (min.)
2,500Vrms (min.)
5,000Vrms (min.)
5,000Vrms (min.)
1,500Vrms (min.)
2,500Vrms (min.)
Available packaging &
terminal choices
SOP
4 PIN, 6 PIN, 8 PIN
PCB, SMT, SOP
4 PIN, 6 PIN, 8 PIN
PCB, SMT, SOP
4 PIN, 6 PIN, 8 PIN
PCB & SMT
6 PIN
PCB, SMT & SOP
4 PIN, 6 PIN, 8 PIN
Tape & reel
Tape & reel
Tape & reel
Tape & reel
Tape & reel
UL 1577
UL 1577
UL 1577
UL 1577
UL 1577
Maximum Ratings and
Electrical Characteristics
Continuous load current
ON resistance
(typical)
Leakage current
Accessories
Approved standards
4
ECbodyREADERS.indd 4
7/14/06 11:21:31 PM
Relays - MOS FET
General Attributes
Dimensions mm (in)
G3VM GR
G3VM LR
G3VM-60
G3VM-80
G3VM-22
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
• C x R characteristics as
low as 5pF*!
• Low leakage current
• Very high operating
speed
• Ideal for IC and
Memory Test
Equipment, SoC Testers,
Measurement Devices,
Instrumentation, Medical
Equipment, Broadband
Systems, Data Loggers,
Security Systems
• Smallest MOS FET relay
on the market
• C x R characteristics as
low as 5pF*!
• Low leakage current
• Very high operating
speed
• Ideal for IC and
Memory Test
Equipment, SoC Testers,
Measurement Devices,
Instrumentation, Medical
Equipment, Broadband
Systems, Data Loggers,
Security Systems
• High current switching
• High current switching
capability
capability
• Low ON-resistance
• Low leakage current
• Low leakage current
• Ideal for Broadband
• Cost effective solutions
Systems,
• Ideal for Measurement
Measurement Devices,
Devices, Instrumentation, Instrumentation, Medical
Security Systems,
Equipment, Data
Medical Equipment,
Loggers, Consumer
Alarm Controls,
Electronics
Consumer Electronics
• Single input channel with
dual output channels
• Low ON-resistance
• Ideal for Inline Interface
Applications, Data
Loggers, ADSL Modems
and Routers, Edge
Routers, Data Storage
Devices
0-20V (AC or DC)
0-40V (AC or DC)
0-20V (AC or DC)
0-40V (AC or DC)
0-60V (AC or DC)
0-80V (AC or DC)
0-20V (AC or DC)
0-120mA
0-160mA
0-300mA
0-120mA
0-160mA
0-300mA
0-450mA
0-400mA
0-500mA
0-1,000mA
0-2,000mA
0-2,500mA
0-350mA
0-1,250mA
0-150mA
1!, 5!, 10!
0.8!, 1!, 5!, 10!
0.12! (max.)
7! (max.)
1! (typ.)
0.11! & 1.0!
2!
Output capacitance
1.0pF (typ.)
5.0pF (typ.)
10pF (typ.)
0.8pF (typ.)
1.0pF (typ.)
5.0pF (typ.)
10pF (typ.)
_
_
_
Available switching
configurations
1 Form A
1 Form A
1 Form A
1 Form A
Dual 1 Form A
1.0nA (max.)
1.0nA (max.)
1.0nA (max.) & 1.0µA (max.) 0.2nA (typ.) & 1.2nA (typ.)
1.0µA (max.)
turn-ON time
(typical)
0.3ms
0.3ms
0.8ms
1.0ms
1.4ms
0.3ms
2.0ms
0.5ms
turn-OFF time
(typical)
0.3ms
0.3ms
0.1ms
0.2ms
0.6ms
0.3ms
0.7ms
0.5ms
Dielectric strength (AC
for 1 minute between
input and output)
1,500Vrms (min.)
1,500Vrms (min.)
1,500Vrms (min.)
2,500Vrms (min.)
1,500Vrms (min.)
2,500Vrms (min.)
Available packaging &
terminal choices
SOP
4 PIN
SOP
4 PIN
SOP, PCB, SMT
4 PIN, 6 PIN
SOP
4 PIN, 6 PIN
PCB & SMT
8 PIN
Tape & reel
Tape & reel
Tape & reel
Tape & reel
Tape & reel
UL 1577
UL 1577
UL 1577
UL 1577
UL 1577
Features
Load voltage
Maximum Ratings and
Electrical Characteristics
Continuous load current
ON resistance
(typical)
Leakage current
Accessories
Approved standards
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Relays - MOS FET
Please refer to specific
data sheets for all
dimensional information
5
ECbodyREADERS.indd 5
7/27/06 8:32:01 AM
Relays - Low Signal
General Attributes
Dimensions mm (in)
Switching
Relays - Low Signal
Features
Contact Information
Contact form
Contact type
G6J-Y
G6K
G6H
G6S
G6A
10.0 H x 10.6 L x 5.7 W
(0.39 x 0.42 x 0.22)
5.30 H x 10.20 L x 6.70 W
(0.21 x 0.40 x 0.26)
5.08 H x 13.97 L x 8.89 W 9.40 H x 15 L x 7.50 W
(0.20 x 0.55 x 0.35)
(0.37 x 0.59 x 0.30)
8.40 H x 20.20 L x 10.10 W
(0.33 x 0.80 x 0.40)
1A max.
1A max.
1A max.
2A max.
2A max.
• Slimline, 2 Form C,
1 Amp relay
• SMT & PCB versions
• 2.5kV surge withstand
• Available in SMT & PCB
• Latching & non-latching
versions
• Ideal for Telecom, Test &
Measurement, Medical,
Security, Computer
Peripheral, Office
Automation
• Small real estate,
2 Form C, 1 Amp relay
• 100mW power
consumption
• 2.5kV surge withstand
• SMT & PCB versions
• Latching & non-latching
models
• Ideal for Telecom,
Test & Measurement,
Medical, Security, Office
Automation, Computer
Peripheral
• Low profile (5mm),
2 Form C, 1 Amp relay)
• Available in SMT & PCB
• 1.5kV surge withstand
• 140mW power
consumption
• Ideal for Telecom,
Test & Measurement,
Medical, Security, Office
Automation, Computer
Peripheral
• Industry standard,
2 Form C, 2 Amp relay
• 2.5 kV surge withstand
• SMT gullwing, SMT
inside-L, PCB models
• Latching & non-latching
versions
• European version
available (supplementary insulation at 250V
at pollution degree 2 per
EN60950/EN41003)
• Ideal for Telecom,
Thermostats, Medical,
Test & Measurement,
Security
• Industry standard,
2 Form C, 2 Amp relay
• 200mW, 400mW
versions
• 2 Pole & 4 Pole models
• Latching & non-latching
versions
• 1.5kV surge withstand
• Ideal for Telecom, Test
& Measurement,
Security
2 Form C
2 Form C
2 Form C
2 Form C
2 Form C, 4 Form C
Bifurcated crossbar
Bifurcated crossbar
Bifurcated crossbar
Bifurcated crossbar
Bifurcated crossbar
Ag with Au alloy clad
Ag with Au clad
Ag with Au clad
Ag with Au clad;
AgPd with Au clad
Ag with Au clad;
AgPd with Au clad
Rated load
(under resistive load)
0.3A @ 125VAC,
1A @ 30VDC
0.3A @ 125VAC,
1A @ 30VDC
0.5A @ 125VAC,
1A @ 30VDC
0.5 @ 125VAC,
2A @ 30VDC
0.3A to 0.5A @ 125VAC,
1A to 2A @ 30VDC
Max. operating voltage
125VAC, 110VDC
125VAC, 60VDC
125VAC, 110VDC
250VAC, 220VDC
250VAC, 220VDC
Max. switching capacity
under resistive load
37.5VA, 30W (NO)
37.5VA, 30W
62.5VA, 33W
62.5VA, 60W
125VA, 60W
100,000
100,000
100,000
100,000
500,000
10µA @ 10mVDC
10µA @ 10mVDC
10µA @ 10mVDC
10µA @ 10mVDC
10µA @ 10mVDC
3, 4.5, 5, 12, 24VDC
3, 4.5, 5, 6, 9, 12, 24VDC
3, 5, 6, 9, 12, 24, 48VDC
3, 4.5, 5, 6, 9, 12, 24VDC
3, 5, 6, 9, 12, 24, 48VDC
140mW
(230mW for DC24)
100mW
(standard and latching)
140mW (standard)
140mW (standard)
140mW, 200mW (latching)
200mW (DPDT standard)
180mW (DPDT latching)
360mW (4PDT standard)
1,500VAC
1,500VAC
1,000VAC
2,000VAC
1,000VAC
Contact material
Min. electrical service life
(operations at rated load)
Min. permissible load
(for reference only)
Coil Information
Coil voltage
Power consumption
Characteristics
Dielectric strength
between coil & contacts
(50/60 Hz for 1 minute)
Surge withstand
2.5kV (2 x 10µs)
2.5kV (2 x 10µs)
1.5kV (10 x 160µs)
2.5kV (2 x 10µs)
1.5kV (10 x 160µs)
Terminal choices
SMT Gullwing, PCB
SMT Gullwing,
SMT Inside-L, PCB
PCB (G6H),
SMT Gullwing (G6H-2F)
SMT Gullwing,
SMT Inside-L, PCB
PCB
Tape & reel available
Tape & reel available
Tape & reel available
Tape & reel available
–
Bellcore 2.5kV / Telcordia
GR-1089-CORE 2.5kV
between coil and contacts
Bellcore 2.5kV / Telcordia
GR-1089-CORE 2.5kV
between coil and contacts
UL, CSA, (FCC Part 68)
Bellcore 2.5 kV / Telcordia UL, CSA, (FCC Part 68)
GR-1089-CORE 2.5 kV
(between coil and contacts)
Packaging
Approved standards
6
ECbodyREADERS.indd 6
7/23/06 6:42:10 PM
Relays - Low Signal
G5A
General Attributes
Dimensions mm (in)
G5V-1
G6L
G5V-2
G6E
10.0 H x 12.50 L x 7.50 W
(0.39 x 0.49 x 0.30)
4.5 H x 10.6 L x 7.0 W
(0.18 x 0.42 x 0.28
11.43 H x 20.32 L x 9.91 W
(0.45 x 0.80 x 0.39)
8.38 H x 16 L x 9.9 W
(0.33 x 0.63 x 0.39)
1A max.
1A max.
1A max.
2A max.
3A max.
• General use, 2 Form C,
1 Amp relay
• Semi-sealed or fullysealed construction
• Ideal for Telecom,
Security, Computer
Peripheral, Office
Automation
• General use, 1 Form C,
1 Amp relay
• 150mW power
consumption
•1.5kV surge withstand
• Ideal for Telecom,
Security, Computer
Peripheral
• Very low profile,
1 Form A, 1 Amp relay
• 1.5kV surge withstand
• SMT & PCB versions
• Ideal for Security &
General Use
• 2 Form C, 1-2 Amp relay
• Ideal for general use
• Industry standard
footprint
• 150mW, 360mW &
500mW coil power
versions
• 1.5 kV surge withstand
• General use, 1 Form C,
3 Amp relay
• 2.5 kV surge withstand
• 200mW, 400mW models
• Latching and non-latching
versions
2 Form C
1 Form C
1 Form A
2 Form C
1 Form C
Bifurcated crossbar
Single crossbar
Single crossbar
Bifurcated crossbar
Bifurcated crossbar
Contact material
Ag with Au clad
Ag with Au clad
Ag with Au clad
Ag with Au clad
Ag with Au clad
Rated load
(under resistive load)
0.5A @ 24VAC,
1A @ 24VDC
0.5A @ 125VAC,
1A @ 24VDC
0.3A @ 125VAC,
1A @ 24VDC
0.5A @ 125VAC,
2A @ 30VDC
0.4A @ 125VAC,
2A @ 30VDC
125VAC, 125VDC
125VAC, 60VDC
125VAC, 60VDC
125VAC, 125VDC
250VAC, 220VDC
37.5VA, 33W
62.5VA, 30W
37.5VA, 24W
62.5VA, 60W
50VA, 60W
100,000
100,000
100,000
300,000
100,000
1mA @ 5VDC
1mA @ 5VDC
1mA @ 5VDC
10µA @ 10mVDC
10µA @ 10mVDC
5, 6, 9, 12, 24, 48VDC
5, 6, 9, 12, 24VDC
3, 4.5, 5, 12, 24VDC
3, 5, 6, 9, 12, 24, 48VDC
3, 5, 6, 9, 12, 24, 48VDC
200mW
(standard & latching)
150mW
180mW (standard)
500mW (standard)
360mW (high-sensitivity)
150mW (ultra-sensitive)
200mW (standard)
400mW (standard)
1,000VAC
1,000VAC
1,000VAC
1,000VAC
1,500VAC
Surge withstand
_
1.5kV (10 x 160µs)
–
1.5kV (10 x 160µs)
2.5kV (2 x 10µs)
Terminal choices
PCB
PCB
PCB, SMT Gullwing
PCB
PCB
–
–
Tape & reel available
–
–
UL, CSA
UL, CSA
UL/CSA (FCC Part 68)
UL, CSA
UL/CSA (FCC Part 68)
Bellcore 2.5kV / Telcordia
GR-1089-CORE 2.5kV
between coil and contacts
Switching
Features
Contact Information
Contact form
Contact type
Max. operating voltage
Max. switching capacity
under resistive load
Min. electrical service life
(operations at rated load)
Min. permissible load
(for reference only)
Coil Information
Coil voltage
Power consumption
Characteristics
Dielectric strength
between coil & contacts
(50/60 Hz for 1 minute)
Packaging
Approved standards
Relays - Low Signal
8.38 H x 16 L x 9.9 W
(0.33 x 0.63 x 0.39)
7
ECbodyREADERS.indd 7
7/14/06 11:21:43 PM
Relays - Low Signal RF/HF
NEW!
G6W
General Attributes
G6Y
Dimensions mm (in) 8.9 H x 20 L x 9.4 W
(0.35 x 0.79 x 0.37)
9.20 H x 20.70 L x 11.70 W 8.9 H x 20 L x 8.6 W
(0.35 x 0.79 x 0.34)
(0.36 x 0.81 x 0.46)
Switching 0.5A max.
Relays - Low Signal RF/HF
G6Z
G6K-RF
G9YA
5.4 H x 10.3 L x 6.9 W
(0.21 x 0.41 x 0.27)
39.0 H x 34.0 L x 13.2 W
(1.54 x 1.34 x 0.52)
1A max.
0.5A max.
1A max.
100mA max.
• 900MHz+ HF relay
• 1 Form C
• Micro strip line
technology
• Ideal for CATV, Digital
TV tuners, Test &
Measurement
• 2.6GHz+ HF relay
• 1 Form C
• Micro strip line technology
• 75 ! & 50 !
impedance models
• Latching & non-latching
models
• Reverse terminal configurations
• Y & E terminal configurations
• SMT and PCB versions
• Ideal for Base Station LNA &
TMA switching, CATV, Digital TV
tuners, Test & Measurement,
Broadcast, FWA
• 1GHz+ HF relay
• 2 Form C
• 100mW coil power
• Smallest 2 Form C on the
market
• Ideal for Test &
Measurement, CATV, Digital
TV tuners
• 26.5GHz bandwidth
• Coaxial HF relay
• 60dB isolation (26.5GHz)
• Contact carry power of 120W
at 3GHz
• Available in failsafe &
TTL-driven models
• Also available in non-latching
and dual latching configuraitons
• Ideal for Mobile Communications
Infrastructure Equipment,
Broadcast Equipment, Test
and Measurement Equipment,
Wireless LAN
65dB (2GHz)
60dB (2.5GHz)
40dB (5.0GHz)
65dB (900MHz)
60 - 65dB (900MHz)
30 - 45dB (2.6GHz)
20 - 30dB (1GHz)
60dB (26.5GHz)
65dB (12.4GHz)
Insertion loss 0.2dB (2GHz)
0.2dB (2.5GHz)
0.4dB (5.0GHz)
0.5dB (900MHz)
0.1 - 0.2dB (900MHz)
0.3 - 0.5dB (2.6GHz)
0.2dB (1GHz)
0.8dB (26.5GHz)
0.4dB (12.4GHz)
0.3dB (8GHz)
1.5 (900MHz)
1.1 - 1.2 (900MHz)
1.3 - 1.5 (2.6GHz)
0.2dB (1GHz)
1.7 (26.5GHz)
1.35 (12.4GHz)
1.25 (8GHz)
1 Form C
1 Form C
2 Form C
1 Form C
Twin crossbar
Twin crossbar
Bifurcated crossbar
Twin crossbar
Contact material Au clad Cu alloy
Au clad Cu alloy
Au clad Cu alloy
Au alloy on Ag base
Au clad Cu alloy
Rated load 10mA @ 30VAC
(under resistive load) 10mA @ 30VDC
2.5GHz, 10W
10mA @ 30VAC;
10mA @ 30VAC;
900 MHz, 1W
10mA @ 30VAC;
10mA @ 30VDC;
900MHz, 10W
0.3A @ 125VAC;
1A @ 30VDC
100mA @ 30VDC
30VDC, 30VAC
30VDC, 30VAC
60VDC, 125VAC
30VDC
10VA, 10W
10VA, 10W
37.5VA, 30W
120W (3GHz)
Min. electrical service life 300,000
300,000
300,000
300,000
5,000,000
Coil Information
Coil voltage 3, 4.5, 9, 12, 24VDC
3, 4.5, 5, 6, 9, 12, 24VDC
3, 4.5, 5, 9, 12, 24VDC
3, 4.5, 5, 6, 9, 12, 24VDC
4.5, 5, 12, 15, 24, 28VDC
200mW
200mW (standard)
200mW (single latching)
360mW (dual latching)
100mW
500mW (dual latching)
700mW (failsafe)
1,000VAC
1,000VAC
750VAC
500VAC
PCB
PCB, SMT Gullwing
SMT Gullwing
SMA Terminals, Solder
Terminals, Pin Terminals
–
Tape & reel available
–
Connector Cables
Features • 5GHz+ HF relay
• 1 Form C
• Tri-plate micro strip line
technology
• Latching & non-latching
models
• SMT and PCB versions
• Ideal for Base Station
LNA & TMA switching,
Test & Measurement,
Broadcast, FWA
HF Characteristics
Isolation
VSWR 1.2 (2GHz)
1.2 (2.5GHz)
1.5 (5.0GHz)
Contact Information
Contact form 1 Form C
Contact type(s) Twin crossbar
Max. operating voltage 30VDC, 30VAC
Max. switching capacity 10VA, 10W
under resistive load
(operations at rated load)
Power consumption 200mW (standard)
200mW (single latching)
360mW (dual latching)
Characteristics
Dielectric strength 1,000VAC
between coil & contacts
(50/60 Hz for 1 minute)
Terminal choices PCB, SMT Gullwing
Packaging / Options –
8
ECbodyREADERS.indd 8
www.components.omron.com
7/14/06 11:21:45 PM
Relays - Power PCB
NEW!
NEW!
G5NB
General Attributes
Dimensions mm (in) 15.3 H x 20.5 L x 7.2 W
(0.60 x 0.81 x 0.28)
NEW!
G5NB-E
G5SB
G6D-ASI
15.8 H x 20.3 L x 10.3 W
(0.62 x 0.80 x 0.41)
12.5 H x 17.5 L x 6.5 W
(0.49 x 0.69 x 0.26)
3A/5A
5A(NO)/3A(NC)
5A
• High capacity 5A version
available
• Meets EN tracking resistance
CTI>250
• HA version for home
appliances
• Small compact form for 10 kV
impulse and 5A switching
capability
• Meets EN tracking resistance
CTI>250
• High insulation between coil &
contact
• Impulse withstand of 8kV
• Fully Sealed
• Incorporates 5A NO contact
• Subminiature, slim lightweight
design
• Low power consumption
• Fully Sealed
1 Form A
1 Form A
1 Form A
1 Form A
Single button
Single button
Single button
Single button
AgNi
AgSnIn
AgNi/AgSnIn
AgNi/AgSnIn
(resistive load)
200,000 (resistive):
3A @ 125VAC/30VDC
200,000 (resistive):
3A @ 30VDC
100,000:
5A @ 250VAC
For resistive loads:
300,000: 2A @ 30VDC/250VAC
200,000: 3 A (NO)/3 A (NC) at
70,000: 5A @ 30VDC/250VAC
125 VAC; 50,000: 5 A (NO)/3 A (NC)
at 125 VAC; 50,000: 5 A (NO) at
250 VAC; 10,000: 3 A (NC) at
250 VAC; 10,000: 5 A (NO)/3 A (NC)
at 30 VDC
Max. switching capacity
(and resistive load)
375VA, 90W
1,250VA, 90W
1,250VA, 150W(NO)
750VA, 30W(NC)
1,250VA, 150W
Minimum permissible load
(for reference only)
10mA @ 5VDC
10mA @ 5VDC
10mA @ 5VDC
10mA @ 5VDC
5, 12, 18, 24VDC
5, 9, 12, 24VDC
5, 12, 24, 48, 110/120VDC
Switching 3A/5A
Features
Contact Information
Contact form
Contact type(s)
Contact material(s)
Electrical service life
(@ 1800 ops./hr.)
Coil Information
Coil voltage 5, 12, 18, 24VDC
Power consumption
200mW
200mW
400mW
200mW
Insulation class
Class A
Class B
Class B
Class B
-40 to +70°C
-40 to +85°C
-40 to +70°C
-25 to +70°C
10kV
10kV
8kV
6kV
4,000VAC (coil-contact)
750VAC (open contacts)
4,000VAC (coil-contact)
750VAC (open contacts)
4,000VAC (coil-contact)
1,000VAC (open contacts)
3,000VAC (coil-contact)
750VAC (open contacts)
PCB
PCB
PCB
PCB
Semi-sealed
Semi-sealed
Semi-sealed
Semi-sealed
N/A
N/A
N/A
Socket for back connecting,
sockets with PCB terminals
UL, CSA, VDE
UL, CSA, VDE
UL, CSA, VDE
UL, CSA, TUV, SEV
Characteristics
Operating temperature
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
Relays - Power PCB
15.3 H x 20.5 L x 7.2 W
(0.60 x 0.81 x 0.28) max.
9
ECbodyREADERS.indd 9
7/14/06 11:21:49 PM
Relays - Power PCB
NEW!
NEW!
G6DS
General Attributes
Dimensions mm (in) 12.4 H x 20 L x 5.0 W
(0.60 x 0.81 x 0.28)
G2RG
G6B
25.5 H x 29 L x 13 W
(1.00 x 1.14 x 0.51)
9.91 H x 20.07 L x 9.91 W
(0.39 x 0.79 x 0.39)
5A
8A
8A/5A
• Slim 5mm for max. density mounting • Slim 5mm width, & reduced
• High sensitive coil option reduces
PCB area (103mm2) ideal for
power consumption
high-density mounting
• Meets EN reinforced insulation
• Highly efficient magnetic circuit
requirement for control equipment
for high sensitivity
• Fully sealed
• UL Class I, Division II approved
• Resistant to mechanical shock
for hazardous locations
• 1.5mm contact gap x 2
poles=3mm total gap meeting
UPS standards
• Dimensions & mounting holes
are same as G2R relay series
• Sealed construction, standard
• Meets EN tracking resistance
CTI > 250
• UL508/CSA 22.2
• Subminiature and low power
• Sealed construction standard
• Single & dual coil latching
available
1 Form A
1 Form A
2 Form A
1 Form A, 2 Form A, 2 Form B
1 Form A + 1 Form B
Single button
Single button
Single button
Single button
AgNi
Ag-Alloy
AgSnO2
AgSnO2
100,000: 5A @ 30VDC/250VAC
80,000 (high sensitivity):
5A @ 30VDC/250VAC
100,000: 3A @ 30VDC/250VAC
6,000: 5A @ 250VAC/24VDC
10,000: 8A @ 250VAC
100,000: 5A @ 30 VDC/250VAC
8A @ 30 VDC/250VAC (highcapacity)
Max. switching capacity
(resistive load)
1,250VA, 150W
750VA, 90W
2,000 VA
1,250VA, 150W
2,000VA, 240W (high-capacity type)
Minimum permissible load
(for reference only)
5mA @ 24VDC
10mA @ 5VDC
10mA @ 5VDC
10mA @ 5VDC
5, 12, 24VDC
12, 24VDC
5, 6, 12, 24VDC
180mW
120mW (high-sensitivity)
120mW
800mW
200mW (1 pole)
300mW (2 pole)
Class B
Class B
Class B
Class A
-40 to +85°C
-40 to +85°C
-40 to +70°C
-25 to +70°C
6kV
5.08kV
10kV
—
3,000VAC (coil-contacts)
750VAC (open contacts)
3,000VAC, (coil-contact)
750VAC, (open contacts)
5,000VAC, (coil-contact)
3,000VAC, (contacts pole-pole)
1,000VAC (open contacts)
4,000VAC (coil-contact)
2,000VAC (contacts pole-pole)
1,000VAC (open contacts)
PCB
PCB
PCB
PCB
Fully Sealed
Fully sealed
Fully sealed
Fully sealed
Socket for back connecting,
sockets with PCB terminals
N/A
N/A
Sockets & clips for back connecting
sockets with PCB terminals
UL, CSA, VDE
UL, CSA, VDE, EN, IEC 61131-2,
IEC 61010
UL, CSA, VDE (O700/0110)
UL, CSA, (FCC Part 68)
SEV, TUV, IEC
Switching 5A
Features
Contact Information
Contact form
Relays - Power PCB
G6M
17.7 H x 20.3 L x 5.08 W
(0.70 x 0.80 x 0.20)
Contact type(s)
Contact material(s)
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Coil Information
Coil voltage 5, 12, 24VDC
Power consumption
Insulation class
Characteristics
Operating temperature
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
10
ECbodyREADERS.indd 10
7/14/06 11:22:05 PM
Relays - Power PCB
NEW!
G6RN
General Attributes
Dimensions mm (in) 15 H x 28.5 L x 10 W
(0.59 x 1.12 x 0.39)
Switching 8A
NEW!
G5LE/-E
G5LB/-25
G5Q
19 H x 22.5 L x 16.5 W
(0.75 x 0.89 x 0.65)
15.2 H x 19.6 L x 15.6 W
(0.60 x 0.77 x 0.61)
15.8 H x 20.3 L x 10.3 W
(0.62 x 0.80 x 0.41)
10A
10A (NO contacts)
• Small "sugar cube" size used
as common platform
• Sealed construction optional
• High capacity contacts:-E
•Increased (0.8) contact
gap:-G8
• Special application versions
available
• Sealed construction optional
• 10A switching in low profile
"sugar cube" package
• Optional -25 type meets stringent
EU requirements, including
tracking resistance CTI > 250 &
extended life
• 4.5kV impulse withstand
• Low power consumption
• Compact PCB relay with high
insulation
• Withstands impulse of 8kV
coil-contacts
• Meets EN tracking resistance
CTI >250
• Class F coil insulation standard
• Low power consumption
1 Form A, 1 Form C
1 Form A, 1 Form C
1 Form A, 1 Form C
1 Form A, 1 Form C
Single button
Single button
Single button
Single button
AgNi +gold plating
AgSnO2 /AgSnIn (either with gold
plating option)
AgSnO2
AgNi
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
100,000:
8A @ 250VAC
5A @ 30VDC
100,000:
100,000:
13A @ 120VAC (@ 85°C/87°C) 10A @ 120VAC/250VAC
5A @ 250 VAC (AgSnO2)
8A @ 30VDC
6 FLA, 6 LRA @ 120VAC @ 85°C
TV-5 @120VAC
50,000: 10A @ 250VAC
50,000 16A @ 250VAC
1/8 HP @ 120 VAC (@ 85°C)
30,000: 12A @ 120VAC
200,000:
3A (NO)/3 A (NC) @ 125VAC
100,000:
3A (NO)/3 A (NC) @ 250VAC
5A (NO)/3 A (NC) @ 30VDC
50,000: 10A (NO) @125VAC
(900 ops. per hour)
Max. switching capacity
(resistive load)
2,000VA,150W
1,200VA,240W
1,200VA, 240W
2,500VA, 240W (-25 type)
1,250VA,150W (NO)
375 VA, 90W (NC)
Minimum permissible load
(for reference only)
10mA @ 5 VDC
100mA @ 5VDC,
100mA @ 5VDC
10mA @ 5VDC
5, 6, 9, 12, 24, 48VDC
3, 5, 6, 9, 12, 24, 36, 48VDC
5, 12, 24VDC
220mW, 250mW (DC24/48)
400mW /360mW available
360mW (standard)
400mW (“-40” style)
600mW (“-60” style)
400mW Form C
200mW Form A
Class B
Class B, F (UL/CSA ONLY)
Class B, F (-25 type)
Class F
-40 to +85°C
-40 to +85°C
-40 to +85°C
-40 to +105°C
—
4.5kV
4.5kV
8kV
4,000VAC (coil-contact)
1,000 (open contacts)
2,000VAC (coil-contact)
750VAC (open contacts)
2,000VAC (coil-contact)
750VAC (open contacts)
4,000VAC (coil-contact)
1,000VAC (open contacts)
PCB
PCB
PCB
PCB
Sealed
Standard: Semi-sealed/vented,
Option: sealed
Standard: Semi-sealed/vented,
Option: sealed
Standard: Semi-sealed/vented,
Option: sealed
N/A
N/A
N/A
N/A
UL, CSA, VDE
UL, CSA, TUV, VDE
UL, CSA, VDE
UL, CSA, VDE
Contact Information
Contact form
Contact type(s)
Contact material(s)
Coil Information
Coil voltage 5, 6, 12, 24, 48VDC
Power consumption
Insulation class
Characteristics
Operating temperature
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
Relays - Power PCB
10A (16A for Semi-sealed "E" type)
• 8 mm coil/contact creepage
• Low profile
• Sealed construction standard
• Ideal for switching contactors,
solenoids & motors
Features
11
ECbodyREADERS.indd 11
7/14/06 11:22:22 PM
Relays - Power PCB
NEW TYPES
G6C
General Attributes
Dimensions mm (in) 9.91 H x 20.07 L x 14.99 W
(0.39 x 0.79 x 0.59)
Switching 10A
Relays - Power PCB
Features
Contact Information
Contact form
• Low power consumption for
high power switching
• Low profile 10A power relay
• Single & dual coil latching
types available
• Sealed construction available
• Meets EN tracking resistance
CTI > 250
G5CA
G5PA-1
G8PT
11 H x 16 L x 22 W (10A)
(0.43 x 0.63 x 0.87)
11 H x 22 L x 25 W (15A)
25 H x 24 L x W 10
(0.985 x 0.95 x 0.40)
Multiple, refer to catalog. Basic:
20.1(H)x 32.1(L) x 27.7(W)
10A (15A high capacity)
5A (10A option)
30A (SPST)
10A-30A (SPDT)
• Fully sealed or flux-sealed
• High capacity versions
• High sensitivity types
• PCB or PCB+QC versions
• Ideal for TVs, tuner, & audio
power supply switching, both
front panel and remote
controlled. Also auxiliary
switched power outlets on
tuners and TVs.
• A variety of versions in a
single standard package meet
most UL/FCC power isolation
requirements
• Rated to 100A inrush @ 250
VAC for minimum
40,000 operations
• Industry standard form with
30A switching
• UL Class F insulation standard
• Wide range of coil ratings
• Various sealing forms: open
frame, vented/flux sealed, fully
sealed
• UL508/UL873 Column A
spacings
• Meets EN Tracking resistance
CTI > 175
• High dielectric at open contacts
1 Form A + 1 Form B, 1 Form A
1 Form A
1 Form A
1 Form A, 1Form C
Single button
Single button
Single button
Single button
Ag-Alloy
AgSnIn
AgSnO2
AgSnIn (other alloys available)
100,000: 10A @ 30VDC/250VAC
100,000:
10A @ 30VDC
15A @ 110VAC (high capacity)
10A @ 250VAC (fully sealed, std)
300,000:
10A @ 250VAC (semi-sealed)
30,000: [email protected] VAC 5A @
30VDC / 277VAC (high capacity type)
25,000: TV-5 TV-8 (optional)
6,000: 5A @ 30VDC
100,000: 10A @ 250 VAC
(high-capacity type)
100,000: 30A @ 277VAC (NO)
50,000: 30A @ 277VAC (NC)
Consult catalog for other ratings
Max. switching capacity 2,500VA, 300W
(resistive load) 2,000VA, 240W (latching)
2,500VA, 300W
N/A
1 Form A: 7,500VA, 560W
Minimum permissible load
(for reference only)
10mA @ 5VDC
100mA @ 5VDC
10mA @ 5 VDC
500mA @ 5VDC
3, 5, 6, 12, 24VDC
5, 12, 24VDC
5, 6, 9, 12, 24 VDC
(4.5 VDC non-standard)
5, 9, 12, 24, 48, 110VDC
Other coil voltages available
200mW (monostable & single
coil latching)
280mW (dual coil latching)
200mW (standard & high
capacity)
150mW (high sensitivity)
250mW
530mW (high capacity,
extended electrical life)
150mW (under development)
900mW
Class A
Class B
Class B
Class F
-40 to +70°C
-25 to +70ºC
-40 to +70°C
-55°C to +105°C
4.5kV
4.5kV
10kV
12kV
6kV
2,000VAC (coil -contact)
2,000VAC (contacts pole-pole)
1,000VAC (open contacts)
PCB, self clinching
2,500VAC (coil-contact)
1,000VAC (open contacts)
4,000VAC (coil-contacts)
1,000VAC (open contacts)
2,500VAC, (coil-contact)
1,500VAC, (open contacts)
PCB
Optional: PCB+quick-connect
contact terminals
PCB
PCB (optional self-clinching)
PCB coil /quick connect contact
Flange mount all quick connect
Semi-sealed
Fully sealed option
Semi-sealed
Fully sealed option
Semi-sealed
Open frame, Vented/semi-sealed,
Fully sealed
Socket for QC contact terms.,
PCB terms., socket clip
N/A
N/A
N/A
UL, CSA, VDE, SEV
UL, CSA, SEV, SEMKO, IEC/TUV
UL, CSA, SEMKO TUV, VDE
UL, CSA, VDE
Contact type(s)
Contact material(s)
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Coil Information
Coil voltage
Power consumption
Insulation class
Characteristics
Operating temperature
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
12
ECbodyREADERS.indd 12
1 Form C: 5000/2500VA, 560W/280W*
* N.O. Contact / N.C. Contact
7/14/06 11:22:28 PM
Relays - Power PCB
NEW!
G2R
General Attributes
Dimensions mm (in)
G2RL
NEW!
G5RL
G2RL-TP
15.5 H x 29 L x 12.7 W
(0.61 x 1.14 x 0.50)
15.7 H x 28.8 L x 12.5 W
(0.61 x 1.14 x 0.49)
15.7H x 40.4 L x 12.5 W
(0.61 x 1.60 x 0.49)
16A max.
16A max.
16A max. (NO), 5A max. (NC)
16A max.
Features
• High dielectric withstand
• 8mm coil/contact spacing
• 1 & 2 pole models
• 3mm contact gap version
available (see G2RG)
• Meets EN tracking resistance
CTI > 250
• Low profile for power rating
• High isolation
• Class F insulation option
• Low power consumption
• Quick connect terminal option
• Meets EN tracking resistance
CTI > 250
• High dielectric due to large
internal creepage distances.
• AC coil in industry standard
package
• Increased temperature &
insulation ratings in low profile
package.
• Simplifies PCB design by allowing
removal of high power PCB
tracings.
• Contact/load terminals in both
5mm for RAST5 connection &
7.5mm existing standard
• Single mounting/soldering
process for both types of terminals
reduces PCB assembly costs.
Contact Information
Contact form
1 Form A, 1 Form C, 2 Form A,
2 Form C
1 Form A, 1 Form C, 2 Form A,
2 Form C
1 Form C
1 Form A
Single button, bifurcated button
Single button (bifurcated available)
Single button
Single button
Ag alloy
AgSnO2 (1 pole); AgNi (2 pole)
AgSnIn
Ag alloy
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
100,000: (high-capacity type)
16A @ 30VDC/250VAC
Consult catalog for other ratings
100,000: 16A @ 250VAC
6,000: 25A @ 240VAC
Consult catalog for other ratings
50,000: 16A @ 24VDC/277VAC (NO)
25,000: TV-5 (NO)
50,000: 16A @ 24VDC/277VAC
20A @ 24 VAC (@ 85ºC)
25,000: TV-5
Max. switching capacity
(resistive Load)
4,000VA, 480W (high-capacity 1 pole)
Consult catalog for other ratings
4,000VA, 384W (high-capacity 1 pole)
Consult catalog for other ratings
4,000VA, 384W (NO)
1,250VA, 120W (NC)
4,000VA,
Minimum permissible load
(@1800 ops./hr.)
1 pole: 100mA @ 5VDC;
2 pole: 10mA @ 5VDC
40mA, 24VDC
40mA @ 24VDC
Switching
Contact type(s)
Contact material(s)
Coil Information
Coil voltage
Power consumption
12, 18, 24, 48, 50, 100, 110/120,
5, 12, 24, 48VDC
110, 120, 200/220, 220, 230, 240VAC
5, 6, 9, 12, 18, 24, 48,60, 100,
110VDC
—
24, 100, 115/120, 200, 230/240 VAC 12, 24VDC
5, 12, 24, 48VDC
Consult catalog for other coil
voltages
0.9VA, 530mW (standard)
360mW (high sensitivity)
850mW (latching set),
600mW (latching reset)
400mW (430mW for 48VDC)
0.75VA
400mW (430mW @ 48VDC)
400mW (430mW for 48VDC)
Class B available
Class F
—
Class F
Characteristics
Operating temperature
-40 to +70°C (+85°C option)
-40 to +85°C
-40 to +70°C (AC coil)
-40 to +85°C (DC coil)
-40 to +105°C
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
10kV
10kV
10kV
10kV
5,000VAC (coil-contact)
1,000 VAC (open contacts)
5,000VAC (coil-contact)
1,000 VAC (open contacts)
6,000VAC (coil-contact)
1,000VAC (open contacts)
5,000 VAC, (coil-contact)
1,000 VAC, (open contacts)
PCB, plug in
quick-connect (flange mount)
PCB, optional quick-connect
contact terminals (-TP type)
PCB
PCB (coil terminals)
Quick-connect (contact terminals)
Semi-sealed
Fully sealed option
Semi-sealed
Fully sealed option
Semi-sealed
Semi-sealed
N/A
N/A
N/A
N/A
UL, CSA, SEV SEMKO, VDE, TUV
UL, CSA, VDE
UL, CSA, VDE
UL, CSA, EN 60335
Insulation class
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
Relays - Power PCB
25.5 H x 29 L x 13 W
(1 x 1.14 x 0.51)
13
ECbodyREADERS.indd 13
7/14/06 11:22:44 PM
Relays - DC Power
The switching and driving sections are isolated, gas injected and hermetically sealed.
This advanced construction requires no arc space, saves space, & helps ensure safety.
General Attributes
G9EA
Model G9EA-1(-B)
G9EC
G9EA-1(-B)-CA
G9EB (-1B)
G9EC-1(-B)
High-current conduction
Switching/current conduction
Switching/current conduction
Smallest in series
250VDC, 25A loads
Largest capacity in series
Carries/switches 400V,
200A loads
SPST-NO
SPST-NO
SPST-NO
Double-break, single
Double-break, single
Double-break, single
10m! max. (0.3m! typical)
30m! max.
30m! max. (0.2m! typical)
0.1V max. (for a carry current of 100A)
0.1V max (for a carry current of 25A)
0.1V max. (for a carry current of 200A)
400VDC, 30A, 1,000 operations min.
120VDC, 30A, 2,500 operations min.
250VDC, 25A,
30,000 operations min.
400VDC, 200A,
3,000 operations min.
30A
25A
200A
100A
25A
200A
Short-time carry current 100A (10 min.)
150A (10 min.)
50A (5 min.), 40A (10min.)
300A (15min.)
*Max. interruption current 600A @ 300VDC (5 times)
—
100A @ 250VDC (5 times)
1,000A @ 400VDC (10 times)
100A @ 120VDC (150 times min.)
50A @ 250VDC (50 times min.)
700A @ 400VDC (40 times min.)
—
-200A @ 200VDC
(1,000 times min.)
12, 24, 48, 60 & 100VDC
12, 24, 48, 60 & 100VDC
12, 24, 48, 60 & 100VDC
Approx. 5 to 5.4W
Approx. 2W
Approx. 11W
200,000 operations min.
100,000 operations min.
200,000 operations min.
Insulation resistance
Between Coil &
Contacts 1,000M! min.
1,000M! min.
1,000M! min.
1,000M! min.
Between contacts of
the same polarity 1,000M! min.
1,000M! min.
1,000M! min.
1,000M! min.
Dielectric strength
Between coil &
contacts 2,500VAC for 1min.
2,500VAC for 1min.
2,500VAC for 1min.
2,500VAC for 1min.
Between contacts of
the same polarity 2,500VAC for 1min.
2,500VAC for 1min.
Classification Switching/current conduction
Carries 100A
Features Standard compact model
carries/switches 400VDC, 60A loads Low contact resistance when
carrying current
Contact Information
Contact Form SPST-NO
Contact structure Double-break, single
Contact resistance 30m! max. (0.6m! typical)
Switching voltage drop 0.1V max. (for a carry current of 60A)
Relays - DC Power
G9EB
*Electrical endurance 120VDC, 100A, 3,000 operations min.
400VDC, 60A, 3,000 operations min.
400VDC, 30A, 30,000 operations min.
Max. switching current 100A
Rated carry current 60A
*Overload interruption 180A @ 400VDC (100 times min.)
Reverse polarity -60A @ 200VDC (1,000 times min.) —
interruption
Coil Information
Rated voltage 12, 24, 48, 60 & 100VDC
Power consumption Approx. 5 to 5.4W
Mechanical endurance 200,000 operations min.
2,500VAC for 1min.
2,500VAC for 1min.
4,500V
4,500V
4,500V
-40 to +70°C
(with no icing or condensation)
-40 to +70°C
(with no icing or condensation)
-40 to +50°C
(with no icing or condensation)
Terminals
Screw terminals Yes
Yes
Yes
Yes
Lead wire output Yes
Yes
Yes
Yes
Impulse withstand voltage 4,500V
Ambient operating -40 to +70°C
temperature (with no icing or condensation)
*When using a varistor as protective circuit against reverse surge in the relay coil
14
ECbodyREADERS.indd 14
7/14/06 11:22:49 PM
Relays - General Purpose
MY4H
General Attributes
Dimensions mm (in) 35 H x 28.5 L x 22 W
(1.38 x 1.12 x 0.87)
MK
MY
LY
36 H x 28 L x 21.5 W
(1.42 x 1.10 x 0.85)
35.56 H x 27.94 L x 21.59 W
(1.40 x 1.10 x 0.85)
10 A max.
10A (2 pole);
5 A (4 pole)
15A
• Full hermetic seal for
hazardous applications
• UL Class1, Division II approved
• Signal level switching option
using bifurcated contacts
• Octal base plug-in
• Exceptional reliability
• Push-to-test button standard
• CENELEC conformity
• Exceptional reliability
• Push-to-test button standard
• Arc barrier built into 4 pole
• Built in diode (DC) or C/R
Circuit
• Name plate and mechanical
indicator, standard
• Compact power relay
• LED, Push-to-test button,
bifurcated contacts and other
features available
• Space efficient power switching
• Extended life to
500,000/200,000 operations
4 Form C
2 Form C, 3 Form C
2 Form C, 4 Form C
1 Form C, 2 Form C,
3 Form C, 4 Form C
Single button, bifurcated button
Single button
Single button, bifurcated button
Single button, bifurcated
AgSnIn
Ag (fine silver)
AgNi
Ag-Alloy
100,000 min.
[email protected]/110VAC
(50,000 min. bifurcated)
100,000 min.
10A @ 28VDC/250VAC
2P 500,000: 5A @ 30VDC/250VAC
4P 200,000: 3A @ 30VDC/250VAC
100,000: [email protected]/250VAC
(bifurcated)
200,000 min:
15A @ 24VDC/110VAC
10A @ 24VDC/110VAC
500,000 min: (2 pole)
10A @ 110VAC
Max. switching capacity
(resistive load)
330VA, 72W
2,500VA, 280W
2,500VA, 300W
1,250VA, 150W (4-pole)
1,700VA, 360W (1 pole)
1,100VA, 240W (2, 3, 4 pole)
550VA, 120W (bifurcated)
Minimum permissible load
(@1800 ops./hr.)
100µA @ 1VDC for MY4H
100µA @ 100mVDC for MY4ZH
(Bifurcated contacts)
100mA @ 1VDC
2 pole: 1mA @ 5VDC
4 pole: 1mA @ 5VDC
10µA @ 1 VDC (bifurcated contacts)
100mA @ 5VDC
10mA @ 5VDC (bifurcated contacts)
12, 24, 110/120, 220/240VAC;
12, 24, 48, 100VDC
6, 12, 24, 48, 110/120,
220/240 VAC;
6,12, 24, 48, 100/110VDC
12, 24, 110/120, 220/240VAC,
12, 24, 48, 100VDC
900 mW; 0.9 - 1.1VA
2.7VA, 1.5W
AC Coil: 0.9 to 1.2VA
DC Coil: 0.9W
1.1VA, 0.9W (1 pole);
1.1VA, 0.9W (DPDT);
1.6VA, 1.4W (3PDT);
1.95VA, 1.5W (4PDT)
—
N/A
Class A
Class A
-25°C to +60°C
-10°C to +40°C
-55°C to +70°C
-25°C to +70°C
—
—
—
—
1,000VAC (coil-contact)
1,000VAC (contacts pole pole)
700VAC (open contacts)
2,500VAC (coil-contact)
1,000VAC (open contacts)
2,000VAC (coil-contact)
1,000VAC (open contacts)
2,000VAC (coil-contact)
1,000VAC (open contacts)
Plug-in
Plug-in
PCB, plug-in
Track mounted socket PCB
with .187/.250 QC
Unsealed, semi-sealed
Switching 3A
Features
Contact Information
Contact form
Contact type(s)
Contact material(s)
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Coil Information
24, 110/120VAC
Coil voltage 12, 24VDC
Power consumption
Insulation class
Characteristics
Operating temperature
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
Hermetic seal
Unsealed
Unsealed
PYF14A-E Socket
PYC-A1 Clip
Sockets & clips for track
mount sockets with screw
terminals, & back connecting
sockets with solder & PCB
terminals
Sockets & clips for track
mount sockets with screw
terminals, & back connecting
sockets with solder & PCB
terminals. Note: PYF-S series
screwless clamp terminal socket
available Mounting rails= PFP
Sockets & clips for track
mount sockets with screw
terminals, & back connecting
sockets with solder & PCB
terminals
UL, CSA
UL, CSA, TUV, VDE, SEMKO
UL, CSA, SEV, CE, VDE, IMA
UL, CSA, SEV, VDE, CE
(UL, CSA only with varistors)
Relays - General Purpose
52.58 H x 34.54 L x 34.54 W
(2.07 x 1.36 x 1.36)
15
ECbodyREADERS.indd 15
7/14/06 11:22:57 PM
Relays - General Purpose
NEW!
G2RV
General Attributes
Dimensions mm (in) 91.0 H x 94.0 L x 6.1 W
(3.58 x 3.7 x 0.24)
Relay & terminal block
Switching 6A max.
Relays - General Purpose
Features
G2R-S (S)
G7J
G7L
35.5 H x 29 L x 13 W
(1.40 x 1.14 x .51)
64 H x 53.5 L x 34.5 W
(2.52 x 2.11 x 1.36)
49.02 H x 68.58 L x 34.54 W
(1.93 x 2.70 x 1.36)
1 pole: 10A max.
2 pole: 5A max.
25A max.
30A max.
• Variety of contact forms
• Ideal for 3 phase motor control
• 4 pole mini contactor
• DIN rail mountable
• Minimal chattering
• UL94V-0
• Reliable high power relay
• 3 mm contact gap
• Conforms to IEC 950/UL 1950
• Class B insulation standard
• Most cost effective solution in
its class.
• Ideal for pump, motor loads
• Nameplate and mechanical flag
• Slimmest control relay available
indicator standard
• Capable of switching both electrical
• LED diode, and lockable test
control loads (6A) and signal level
button option available
loads (1mA)
• Socket mount 10A relay (1-pole)
• Relay available separately
• Sealed for unprotected environments
Contact Information
Contact form
1 Form C
1 Form C
2 Form C
4 Form A, 3 Form A/1 Form B,
2 Form A/2 Form B
1 Form A-(Double Make)
2 Form A-(Double Make)
Contact type(s)
Crossbar
Single button, bifurcated crossbar
Single button
Single button
Ag Alloy
Ag Alloy
Ag Alloy
Ag Alloy
6,000: 6A @ 30 VDC /250VAC
100,000 min. (at rated loads)
100,000 min. (at rated loads)
100,000 min. (at rated loads)
(see data sheet for more information)
(see data sheet for more information)
(see data sheet for more information)
1,500VA, 18W (resistive load)
2,500VA, 300W
(1-pole resistive load)
5,500VA, 750W (NO contacts)
1,760VA, 240W (NC contacts)
4,400VA
5mA @ 5VDC
100mA @ 5VDC ,
10mA @ 5VDC (2 pole)
100mA @ 24VDC
100mA @ 5VDC
6, 12, 24, 48VDC;
24, 110 120, 230, 240VAC
6, 12, 24, 48, 100/110VDC;
6, 12, 24, 50, 100/120,
200/240VAC
12, 24, 48, 100VDC;
12, 24, 100/120, 200/240VAC
Contact material(s)
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Maximum
switching capacity
Minimum permissible load
(@1800 ops./hr.)
12, 24, 48VDC
Coil Information
Coil voltage 24, 48, 110, 230VAC
Power consumption
300mW
0.9VA, 0.53W
1.8 to 2.6VA, 2.0W
1.7 to 2.5VA, 1.9W
Insulation class
Class A
Class A
Class A, Class B (available)
Class B
-40ºC to +60ºC
-40 to +70°C
-25ºC to +60°C
-20ºC to +85°C
6kV
8kV
10kV (coil-contacts)
10kV (coil-contacts)
4,000VAC (coil-contacts)
1,000VAC (open contacts)
1 pole: 5,000VAC (coil-contacts)
1,000VAC (open contacts)
2 pole: 5,000VAC (coil-contacts)
3,000VAC (different polarity)
1,000VAC (open contacts)
4,000VAC (coil-contacts)
4,000VAC (different polarity)
2,000VAC (open contacts)
4,000VAC (coil-contacts)
2,000VAC (different polarity)
2,000VAC (open contacts)
Quick-connect, screw, PCB
Quick-connect, screw, PCB
Characteristics
Operating temperature
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
Plug-in
Relay: Quick-connect
Socket: screw terminals, push-in
wire connections (sold separately)
Semi-sealed
Unsealed
Unsealed
Semi-sealed
Unsealed
Semi-sealed
Socket: G2RV-SL (UL 508)
SSR Option: G3MB / G3MC
Sockets for track mount, sockets
with screw terminals, & back
connecting sockets with solder &
PCB terminals. Note: P2RF-S series
screwless clamp terminal socket
available. SSR option: G3R.
R99-04V for G5D W-bracket
R99-07G5D E bracket;
P7LF-D adapter;
P7LF-06 front connecting socket
UL, CSA
UL, CSA, VDE, IEC, LR, CE
UL, CSA, TUV, CE, IEC
UL, CSA, TUV, CE, VDE available
16
ECbodyREADERS.indd 16
7/14/06 11:23:10 PM
Relays - General Purpose
NEW!
G7Z
General Attributes
Dimensions mm (in) 84 H x 62 L x 45 W
(3.31 x 2.44 x 1.77)
MGN
MJN
Short Base: 55.88 H x 63.50 L x 63.50 W
(2.20 x 2.50 x 2.50)
Long Base: 60.45 H x 84.33 L x 63.50 W
(2.38 x 3.32 x 2.50)
48.38 H x 35.56 L x 38.73 W
(1.91 x 1.40 x 1.53)
30A max.
10A, 20A, 30A (UL ratings)
• Each pole able to switch and carry 40A in
parallel
• Capable of switching up to 160A
• Reduced power consumption & size
• Low noise
• Safety function included as standard
• Optional auxiliary contact block enables
concurrent signal (1mA) switching
• 30 Amp heavy duty power relay
• Class F coil insulation system for 155°C
(total temperature)
• Coil molded in DuPont Rynite® for
environmental protection
• Rugged construction rivets terminals
to base
• Magnetic blow-out option
• Rugged power driver offers superior 3/16”
through-air & 3/8” over-surface spacing
• Interlocked frame & contact block prevent
contact misalignment during plug-in
• Indicator lamp, push-to-operate options
• 10A-30A in same package
• Continous duty at 125% coil voltage
4A, 3A/1B, 2A/2B
1 Form A, 1Form B, 1Form C, 2 Form A,
2 Form C (long base)
1 Form C, 2 Form C, 3 Form C (monostable);
1 Form C, 2 Form C (latching/unlatching)
Bifurcated Crossbar
Single button
Single button
AgSnIn
5/16” diameter AgCdO2
3/16” diameter AgCdO2
100,000: 5A @ 110VDC (at 1,2000 ops/hr)
80,000: 40A @ 440VAC
100,000 min.
30A @ 28VDC/240VAC
100,000 min.
10A @ 28VDC/240VAC
20A @ 28VDC/277VAC
30A @ 28VDC
Max. Switching Capacity
(resistive load)
17,600VA, 550W
440VA, 110W (auxiliary contact block)
N/A
N/A
Minimum permissible load
(@1800 ops./hr.)
2A @ 24VDC
<1mA @ 5VDC (auxiliary contact block)
N/A
N/A
12, 24VDC
6, 12, 24, 120, 240, 480VAC;
6, 12, 24, 48, 110VDC
6, 12, 24, 120VAC
5, 6, 12, 24, 48, 110VDC
3.7W
9.5VA nominal; 2W nominal
AC 1.7VA (1, 2PDT)
2.0VA (3PDT DC 1.2W
Class B
Class F
Class A
Characteristics
Operating temperature
-25ºC to +60ºC
At 30Amps:
-45ºC to +80°C (AC coil)
-45ºC to +115°C (DC coil)
-45ºC to +60°C (1 & 2 pole AC coil), + 70°C (DC coil)
-45ºC to +45°C (3 pole AC coil)
-45ºC to +70°C (3 pole DC coil)
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
10kV (coil to contacts or different polarity)
4.5kV (open contacts)
N/A
N/A
4,000VAC (coil-contacts)
4,000VAC (different polarity)
2,000VAC (open contacts)
2,200Vrms, 60Hz between contacts;
2,200Vrms, 60Hz between other elements
750VAC, rms 60Hz across open contacts;
2,500VAC, rms 60Hz all other mutually
insulated elements
Screw
Screw
Quick-connect plug-in
Unsealed, fully sealed
None
Semi-sealed
Auxiliary Contact Block (2 poles of 4 poles)
Signal level switching capability (2 poles of
4 poles)
Aluminum dust cover - sealed knock-out holes
for standard conduit fittings. Relay mounts on
pre-drilled base. Snap action cover release
127 W x 76.20 H x 101.60 D (5 x 3 x 4)
PTF11PC Socket; PTF11QDC Socket; PTF21PC
Socket;
PTFPCB Socket; PYMJN-PCB Retaining Clips;
PYMJN-S Retaining Clips
UL, CSA, TUV, VDE
UL
UL, CSA
Switching 40A max. (160A max. in parallel)
Features
Contact Information
Contact form
Contact material(s)
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Coil Information
Coil voltage
Power consumption
Insulation class
Dielectric strength
(50/60 Hz for 1 minute)
Terminal choices
Protection level
Accessories
Approved standards
Relays - General Purpose
Contact type(s)
(see: Electrical service life)
17
ECbodyREADERS.indd 17
7/14/06 11:23:25 PM
Relays - Solid State
SIP
G3MB
General Attributes
Dimensions mm (in)
G3MC
DIP
G3R I/O
G3DZ
13.5 H x 24.5 L x 4.5 W
(0.53 x 0.96 x 0.18)
Input & Output modules:
28 H x 29 L x 13 W
(1.10 x 1.14 x 0.51)
12.5 max. H x 18.5 L x 6.5 W
(0.49 x 0.73 x 0.26) max.
2A @ 240VAC
Input module: 100mA;
Output module: 2A
0.6A @ 240VAC
• Space saving SIP design
• Industry standard footprint
• Monoblock construction results
in ultimate reliability
•Reduced height thin profile SIP
• Ideal for close PCB mounting
• Monoblock construction results
in ultimate reliability
• Industry standard footprint
• 4 kV insulation
• Operation indicator standard
• Interchangeable with G2R
electromechanical relay
• Ideal for DIN rail mount I/O
operations
• AC/DC & AC half-wave
switching with one model
• 10µA max. leakage current
• Matches G6D form factor
-30ºC to +80°C
-30ºC to +80°C
-30ºC to +80°C
-30ºC to +85°C
5, 12, 24VDC
5, 12, 24VDC
Input module: 5VDC;
6.6-32VDC; 60-264VAC;
Output module: 4-32VDC
5, 12, 24VDC
75-264VAC
75-264VAC
Input module: 4-32VDC;
Output module:
75-264VAC, 4-200VDC
5, 12, 24VDC
1.5mA (at 200VAC)
1.5mA (at 200VAC)
Input Module: 5µA
Output Module: 1.5mA (AC)
1mA (DC)
10µA (at 125VDC)
Isolation
Phototriac
Phototriac
Photocoupler, Phototriac
Phototriac
Dielectric strength
(50/60Hz for 1 min.)
2,500VAC
2,500VAC
4,000VAC
2,500VAC
Zero crossing
Optional
Yes
Input module: No;
Output module: Yes
No
Snubber circuit
Optional
Yes
Input module: No;
Output module
Yes (Built-in Varistor)
100,000 hours
100,000 hours
100,000 hours
100,000 hours
Mounting
PCB
PCB
Socket
PCB or Socket
Terminal
PCB
PCB
Plug-in
PCB
20.5 H x 24.5 L x 5.5 W
(0.81 x 0.96 x 0.22)
Switching 2A @ 240VAC
current (resistive)
Features
Operating temperature
Operating input
Relays - Solid State
DIP
SIP
Output voltage
Leakage Current
(max.)
Life (MTTF)
Approvals
UL, CSA, TUV
UL, CSA, VDE
UL, CSA, TUV
UL, CSA
Equivalent Omron
EMR footprint
G2RV similar for terminal block
G2RV similar for terminal block
G2R
G6D, G6DS
Optional heat sink
N/A
N/A
N/A
N/A
Socket
N/A
N/A
P2RF-05E
P6D-04P
18
ECbodyREADERS.indd 18
7/14/06 11:23:32 PM
Relays - Solid State
SIP
G3S/G3SD
General Attributes
Dimensions mm (in)
SIP
SIP
G3CN
SIP
G3M
G3TB
20 H x 40 L x 9 W
(0.79 x 1.58 x 0.35)
Input module:
20.5 H x 43.5 L x 10 W
(0.81 x 1.70 x 0.39)
Output module:
30.5 H x 43.5 L x 10 W
(1.20 x 1.70 x 0.39)
2A, 3A, @ 53VDC, 26VAC
2, 3A, 5A @ 250VAC
Input module: 25mA @ 4 to 32VDC
Output module: 3mA max. @ 5 to 48VDC
3mA max. @ 100 to 240 VAC
1.5 max. @ 48 to 200 VDC
• AC and DC models available
• Socketable
• Heatsink, available
• Interchanges with G6B SPST
electrical mechanical relay
• Flat & vertical packages
• Ideal for FA & OA equipment
• Multi-input SSR
• Space-saving SIP design
• Ideal for high density Power
PCB applications
• High current switching
capability
• Color-coded input &
output modules
• Industry standard footprint
• 4kV dielectric strength
• LED indicator
-30°C to +80°C
-30°C to +80°C
-30°C to +80°C
-30°C to +85°C
Operating input
5, 12, 24VDC
5, 12, 24; 3~28VDC
5, 12, 24VDC
Input module:
80-264VAC, 3-32VDC;
Output module: 3-32VDC
Output voltage
5, 12. 24VDC
75~264VAC
3~53VDC
75-264VAC
Input module: 4-32VDC;
Output module:
75-264VAC, 4-200VDC
2mA (G3S)
0.1mA @ 26VDC (G3S)
2.5/5mA
Input module: 100µA max.
2mA @ 100VAC/5mA @ 200VAC
(2Amp versions)
Output module: 5mA @ 200VAC (AC)
1.5mA @ 200VAC (3 & 5 Amp versions)
1mA max. (DC)
Phototriac (G3S)
Photocoupler (G3SD)
Phototriac
Photocoupler
Phototriac
Photocoupler
2,500VAC
2,500VAC
2,000VAC (2A versions)
2,500VAC (3A and 5A versions)
4,000VAC
No
Optional
Optional
Input module: No;
Output module: Yes
Yes (Built-in Varistor)
No
Yes
Input module: No;
Output module: Yes
Life (MTTF)
100,000 hours
100,000 hours
100,000 hours
100,000 hours
Mounting
PCB or Socket
PCB
PCB
PCB
PCB
PCB
PCB
PCB
UL, CSA
UL (114), CSA (22.2)
UL, CSA, TUV
UL, CSA
Equivalent Omron
EMR footprint
G6B
N/A
N/A
N/A
Optional heat sink
Y92B-S08N
N/A
N/A
N/A
P6B-04P (PCB)
N/A
N/A
N/A
Switching 1A @ 240VAC
current (resistive) (1.2A, G3S-PD & heatsink)
(max.) (1.1A, G3SD-PD & heatsink)
Features
Operating temperature
Leakage Current
(max.)
Isolation
Dielectric strength
(50/60Hz for 1 min.)
Zero crossing
Snubber circuit
Terminal
Approvals
Socket
Relays - Solid State
26H x 33H x 14 W
(1.04 x 1.30 x .55) max.
16.5 H x 20 L x 10 W
(0.65 x 0.79 x 0.39)
19
ECbodyREADERS.indd 19
7/14/06 11:23:38 PM
Relays - Solid State
SIP
Quick Connect
G3TC
General Attributes
Dimensions mm (in)
G3NE
G3NA
G3PA/B
11.5 H x 47 L x 37.5 W
(0.45 x 1.90 x 1.50)
27 H x 58 L x 43 W
(1.06 x 2.28 x 1.69)
Consult Omron
20A [email protected] 240VAC
(264VAC max.)
Versions range from 10A
to 90A max. (when using heat
sink)
up to 45A
• Color-coded modules
• Industry standard footprint
• Built-in anchor screw
• Optical isolation – Dielectric 4kV
• Zero cross on AC output
modules
• High capacity
• Panel Mount
• Quick-connect terminals
• Ideal for industrial controls &
commercial cooking
• "Hockey Puck" standard
• Operation indicator standard
• Built-in heat sink increases
life and reliability
• Voltage turn-on at zero crossing reduces initial inrush load
currents
• LED indicator when control
power applied
-30ºC to +80°C
-30ºC to +80°C
-30ºC to +80°C
-30ºC to +80°C
Input Module:
5, 12, 24VDC
90-140VDC/AC, 180-280 VDC/AC,
10-32VDC/AC
Output Module:
5, 15, 24VDC
4-32VDC; 75-264VAC
12-24VDC
Input Module: 4.5-6VDC,
12-18VDC, 20-30VDC
Output Module: 75-140 VAC,
75-280VAC, 5-60 VDC,
5-200VDC
75-264VAC
19 - 264VAC
180 - 528VAC
4 - 220VDC (10A model)
400 - 600VAC (10, 25, 50A
models)
75 - 264VAC
180 - 528VAC
2mA (at 100VAC)
5mA (at 200VAC)
5mA @ 100VAC
10mA @ 200VAC
20mA @ 400VAC
10mA @ 200VAC
20mA @ 400VAC
AC Input, DC Input, DC Output:
Photocoupler
AC Output: Phototriac
Phototriac
Phototriac, Photocoupler
Phototriac
4,000VAC
2,000VAC
2,500VAC
4000VAC (75 and 90A models)
G3PA: 4,000VAC
G3PB: 2,500VAC
Zero crossing
Yes (AC output
modules only)
Optional
Yes
Yes
Snubber circuit
Yes (AC output
modules only)
Yes (built in varistor)
Yes
Yes
Life (MTTF)
100,000 hours
100,000 hours
100,000 hours
100,000 hours
PCB with anchor screw
Plug-in
Panel
Panel, DIN
PCB
Quick connect
Screw
Screw
UL, CSA, TUV, CE
UL, CSA, TUV
UL, CSA, TUV
UL, CSA, TUV, VDE
Equivalent Omron
EMR footprint
N/A
N/A
N/A
N/A
Optional heat sink
N/A
Y92B-N50, -N100
Y92B-A
Socket
N/A
Mounting plate
Mounting plate
31.8 H x 43.2 L x 15.2 W
(1.25 x 1.7 x 0.6)
Switching Input Module:
current (resistive) 12mA, 15mA, or 18mA
(max.) (depending on model)
Output Module:
3A (1A on DC output models
rated< 200VDC)
Features
Relays - Solid State
Quick Connect
Operating temperature
Operating input
Output voltage
Leakage Current
(max.)
Isolation
Dielectric strength
(50/60Hz for 1 min.)
Mounting
Terminal
Approvals
Input Module: 100µA
AC Output Modules: 5mA @ 240VAC
2.5mA @ 120VAC
DC Output Modules: 1mA
, -B
, -P
N/A
PFP-xxx
20
ECbodyREADERS.indd 20
7/14/06 11:23:44 PM
Sockets
Back Connecting
Sockets
Track Mount
Sockets
Relay Type
Solder terminals
PCB terminals
P2RF-05
P2RF-05-E
P2RF-05-S
P2R-05A
P2R-05P
G2R-2-S
P2RF-08
P2RF-08-E
P2RF-08-S
P2R-08A
P2R-08P
G2RV
G2RL-SL500, -SL700
–
–
G6B
–
–
P6B-04P (1-pole), P6B-26P (2-pole)
G6D
–
–
P6D-04P
G6BK
–
–
P6B-06P
G6BU
–
–
P6B-04P
G6C-1, G6C-2
–
–
P6C-06P
G6CK
–
–
P6C-08P
G6CU
–
–
P6C-06P
LY1, LY2
PTF08A-E
PT08
PT08-0
LY3
PTF11A
PT11
PT11-0
LY4
PTF14A-E
PT14
PT14-0
MK2
PFO83A-E
PL08
PLE08-0
MK3
PF113A-E
PL11
PLE11-0
MY2
PYF08A-E
PYF08A-N
PYF08-S
PY08
PY08-02
MY3
PYF11A
PY11
PY11-02
MY4
PYF14A-E
PYF14A-N
PYF14S
PY14
PY14-02
MY2K
PYF14A-E
PY14
PY14-02
PYF14A-E
–
–
MY4(Z)H
NOTES:
Sockets
G2R-1-S
1. -E and -N models are finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals.
2. -S types are screwless terminal styles.
Relay Type
Adaptor
Mounting
Bracket
Front Connecting
Socket
Track Mount/Panel Mount
Track Mount/Panel Mount
G7J-(ALL)
R99-04-FOR-G5F W bracket
–
–
G7L-1A-T
R99-07G5D E bracket
P7LF-D
P7LF-06
G7L-1A-TJ
P7LF-06
G7L-1A-B
–
G7L-1A-BJ
–
G7L-2A-T
P7LF-06
G7L-2A-TJ
P7LF-06
G7L-2A-B
–
G7L-2A-BJ
–
Terminal Cover
P&LE-C
Socket Bridge
PYDM
Mounting Track
Length
PFP-100N
1 meter
PFP-50N
.5 meter
21
ECbodyREADERS.indd 21
7/14/06 11:24:03 PM
Electronic Components
Omron Electronic Components: The Quality, Flexibility and Global Support You Need
Master Selection Guide
For More Detailed Information…
Visit Us Online: www.components.omron.com
• Browse Omron’s full range of Product information and
selection guides.
• Download PDF’s — datasheets, brochures, and more.
• Find Omron solutions for competitive products.
• Locate a Distributor and search for available inventory.
Call Us:
1-847-882-2288 Monday through Friday,
7:30 a.m. to 6:00 p.m. Central Time (CT)
Relays
Switches
Photomicrosensors
Micro Sensors
Connectors
Email Us:
[email protected]
OMRON ELECTRONICS COMPONENTS LLC
55 Commerce Drive • Schaumburg, IL 60173
IT IS THE BUYER’S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS
FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL
BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR
PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION, END PRODUCT, OR SYSTEM.
BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE
FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR
ATTENTION MUST BE GIVEN:
(i) Outdoor use; uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment,
and installations subject to separate industry or government regulations.
(iv) Systems, machines, and equipment that could present a risk to life or property.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS
A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON
PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE.
YOI-E-03
© 2006 Omron Electronic Componenets
Printed in the U.S.A. 06/2006
REQUIRED PRECAUTIONS
www.components.omron.com
USAcovers.indd 2-3
7/14/06 2:42:48 PM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
G3CN-202P1-DC3-28 G3CN-203P1-US DC3-28 PY11 G3CN-DX02P-DC3-28 G3CN-DX03P-DC3-28 P2R-P
PY11-02 G3CN-DX03P1 DC3-28 P2RM-SR
Similar pages