Datasheet 10G Ethernet Universal Service Module Highlights EM316EUSM-10G 10 Gbps Ethernet Centralized link (CO and CPE) full management through IEEE802.3ah with MRV extensions Interfaces: --Two SFP+ access ports --Two redundant XFP optical trunk ports with LAN --and WAN PHY support Overview The Fiber Driver 10G Ethernet Universal Service Module (EUSM™) is a converter-based optical 10G Ethernet demarcation device for “bookend pair” applications only. Flexible and cost-effective architecture reduces both operating and capital expenses (OpEx and CapEx) while providing premium services. Native support for jumbo packet sizes up to 9600 bytes supports demanding Ethernet services such as distributed video and network storage arrays. Located at the edge of the customer premises, the EUSM-10G CO/CPE pair provides carrier-to-customer network interface that separates the upstream WAN from the downstream network which can be either a customer LAN or a peer carrier network. Each EUSM-10G in the bookend pair uses extended OAM 802.3ah protocols to allow full management of both ends of the pointto-point fiber optic link from a single manager at one end of the link. CO and CPE link ports on the respective EUSM-10G modules are each controlled similarly from the managed side of the link. End-to-end Ethernet service assurance (test and analysis) - MEF 9 EPL and MEF 14 EPL Certified - Extensive port statistics - Ethernet Traffic Generation Agent (E-TGA) - Ethernet Traffic Analysis Agent (E-TAA™) Jumbo packets (9600) Sub-microsecond latency (0.6 us = 600 ns) Per port bandwidth limiting Unfiltered traffic flow for Transparent Line Services (TLS) Fiber Driver management compatibility Hot-swap support Two-slot module fits into 2-slot, 3-slot (3V), and 16-slot Fiber Driver chassis Applications Converter-based services demarcation Signal repeating Transparent LAN services Benefits Carrier-grade reliability at converter-level prices (low CapEx) Minimized truck rolls for reduced OpEx Extreme low latency with full performance monitoring Peer Application #1: Customer Demarcation Field feature enhancement Management Workstation Customer LAN Service Network (Carrier) Optional Redundant Link 16-Slot Fiber Driver Chassis Management LAN User Data Management Data LNXNM-OT EUSM-10G 1 Fiber Trunk 2-slot Fiber Driver Chassis with EUSM-10G Module Datasheet Flexibility Ethernet Traffic Generation Agent (E-TGA) Ethernet traffic generation agents (E-TGA) are configurable for sustained and burst rates, packet size distribution up to 1 Gbps, and all Ethernet packet MAC fields and data load. Flexible interface options reduce inventory needs and OpEx. 10G small form-factor pluggable (SFP+ and XFP) optical transceivers provide further flexibility by interoperating with any 10G Ethernet access interfaces. Pluggable transceivers are available for a range of 10G Ethernet access optical fiber types, distances, and wavelengths, including short and long reach multi-mode as well as short to medium reach single-mode and DWDM from 2 km to 100 km. Ethernet Traffic Analysis Agent (E-TAA™) The E-TAA uses port statistics and/or trunk transit measurements to determine link or service path availability, delay, jitter, and packet loss in line with ITU-T Y.1731. Ethernet OAM Operations, administration, and management (OAM) metrics available through a demarcation device significantly determine the SLA options supported by a service provider. The EUSM-10G incorporates industry OAM standards extended with unique MRV enhancements that support network monitoring, service provisioning, and speedy fault isolation remotely from the network operation center (NOC) through the network. The module offers two modular SFP+ access ports, interoperable with 10G Ethernet standard interfaces. The module also offers two redundant modular XFP ports that support 10G Ethernet traffic over a variety of optical links up to 100 km including gray wavelengths, and DWDM. The extended formfactor pluggable XFP transceivers offer the ultimate flexibility for a wide variety of trunk link solutions, including media conversion to DWDM transport. At the point-to-point link level, the EUSM-10G fully implements the 802.3ah standards with MRV enhancements for full pair (CO and CPE) provisioning and monitoring from the service provider NOC or point of presence (POP). Ethernet Provider Services Beyond the flexibility of physical interfaces, the EUSM-10G offers Transparent Line Services (TLS) for monitoring and control over the demarcation device. High Availability Optical Links Optical Performance Monitoring The EUSM-10G implements a powerful set of optical performance monitoring tools compliant with the Digital Diagnostics (DD) standards (SFF-8472 and SFF-INF-8077i). Through DD, the EUSM-10G provides real-time monitoring and reporting of SFP+ or XFP operating parameters such as optical TX/RX power, voltage, and temperature. It also provides static component information such as vendor code, serial number, wavelength, maximum bandwidth supported, and other device specifications. The intelligent SFP+ or XFP agent provides alarm and warning indications to the EUSM-10G to identify potential problems in optical transmission when pre-defined thresholds are crossed. Network administrators may avoid service outages with preemptive action prompted by threshold alarms. The EUSM-10G offers service protection. The module’s two self-healing (redundant) XFP link interfaces ensure high network availability. It activates redundancy upon loss of optical signal (SD). Ethernet link detection provides a fast switching time to minimize data loss. The two network line redundancy schemes listed below ensure safe service delivery even during some network failures such as: --Physical layer 1:1 redundancy based on loss of --optical signal (SD) and Ethernet link detection --802.3ah OAM 1:1 redundancy 2 Datasheet Peer Application #2: Carrier Demarcation Management Workstation Service Network (Peer Carrier) Service Network (Carrier) Redundant Fiber Trunk 16-Slot Fiber Driver Chassis Management LAN User Data Management Data LNXNM-OT Fiber Trunk 2-slot Fiber Driver Chassis with EUSM-10G Module EUSM-10G METRO ETHERNET Jumbo frames (9600 bytes) at any speed and port High availability optical links Physical interfaces performance monitoring --SFP/XFP Digital Diagnostics (SFF-8472/ INF-8077i) Advanced QoS with low granularity rate policing by port Pure (unfiltered) traffic flow for Transparent Line Services (TLS) --No MAC address learning --Transparent flow control (TLS) --End-to-end errored packets (except runts) Fault propagation --Link Integrity (LIN) --Hierarchical OAM connectivity fault propagation OAM --IEEE 802.3ah with MRV extensions 3 Ethernet Service Level Agent (E-SLA™) - Extensive port statistics - Ethernet-like MIB - OAM statistics (OAM MIB) - RMON MIB (groups 1,2,3 and 9) - Ethernet Traffic Generation Agent (E-TGA) • Configuration options • Rate and burst • Packet sizes • Ethernet packet • MAC header • Data field (fixed, random, etc.) - Ethernet Traffic Analysis (E-TAA™) • Unidirectional and bidirectional in line with ITU-T Y.1731 (EthOAM) • Delay • Jitter • Packet loss Datasheet DEVICE MANAGEMENT Link management through 802.3ah with MRV extensions • Single LNXNM-OT IP/SNMP agent management of multiple links • Full CO/CPE monitoring and provisioning using Graphical web management through an embedded MegaVision-J application on the LNXNM-OT MegaVision Pro® support LNXNM-OT Fiber Driver network management • Out-of-band RS-232 management console • TCP/IP v4 • Secure Access • SSH and optional Telnet access • SNMP v1 and v3 • Radius authentication • ASCII format for simple system configuration • System software and microcode download • Automatic system provisioning (default operation) • System monitoring and provisioning • Syslog and trap notification Physical Specifications Operating Temperature Range 00C to 500C (320F to 1220F) Storage Temperature -400C to 700C (-400F to 1580F) Relative Humidity 85% maximum, non-condensing Approximate Dimensions (H x W x D) 75 mm x 50 mm x 175 mm (3” x 2” x 7”) Approximate Weight 218 g (7.7 oz) Regulatory Compliances FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive; China RoHS; WEEE Directive; The Quality Management System is certified to ISO 9001 by QMI-SAI Global The Environmental Management System is in compliance with ISO 14001 Ordering Information Model Function Protocol Connectors¹ Port/Link Wavelength (nm) Port / Link Budget (dB) Port / Link Range² Port / Link EM316EUSM-10G 10G Optical Ethernet Universal Service Module - fiber (SFP+) access ports and redundant XFP optical trunks; advanced remote management 802.3AH with MRV extensions 10 Gigabit Ethernet SFP+ (x2) XFP (x2) SFP+ Dependent XFP Dependent SFP+ Dependent XFP Dependent SFP+ Dependent XFP Dependent ¹ Default connectors listed, others optional. ² All specifications, distance claims and operational parameters are based on industry average fiber cable performance; 9µ Single-mode performance of 0.25 dB/km for 1550 nm and 0.5 dB/km for 1310 nm, and 62.5µ Multi-mode performance of 3 dB/km for 850 nm and 1.5 dB/km for 1300 nm. For non-standard fiber applications or additional information contact MRV Communications For additional information including pricing, availability and configuration options, contact your MRV Communication sales representative. MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV Los Angeles MRV Boston 20415 Nordhoff Street 300 Apollo Drive Chatsworth, CA 91311 Chelmsford, MA 01824 800-338-5316 800-338-5316 818-773-0900 978-674-6800 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-EUSM10G-080111 3020100-001 Rev. A4 Copyright ©2011 MRV Communications, Inc. All Rights Reserved.