MBR3040CT THRU MBR30200CT 30A High Power Schottky Barrier Rectifiers ■ Features ■ Outline • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Suffix "G" indicates Halogen-free part, ex.MBR3040 CT G. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 TO-220AB 0.420(10.66) 0.386(9.80) 0.197(5.0)MAX 0.055(1.40) 0.043(1.10) 0.226(5.75)MIN 0.155(3.94) MAX 0.624(15.87)MAX Marking code 1 2 3 0.115(2.92) 0.081(2.05) 0.054(1.37) MAX 0.038(0.96) 0.020(0.50) ■ Mechanical data • Epoxy : UL94-V0 rated flame retardant. • Case : JEDEC TO-220AB molded plastic body over passivated chip . • Lead : Axial leads, solderable per MIL-STD-202, Method 208 guranteed . • Polarity: Color band denotes cathode end . • Mounting Position : Any. • Weight : Approximated 2.25 gram . 0.500(12.70)MIN 0.250(6.35) MIN 0.110(2.80) 0.091(2.30) PIN 1 PIN 3 0.028(0.70) 0.011(0.28) PIN 2 Dimensions in inches and (millimeters) ■ Maximum ratings and electrical characteristics Rating at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Conditions Symbol Forward rectified current See Fig.1 Forward surge current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) V R = V RRM T A = 25 OC Reverse current V R = V RRM T A = 125 C Thermal resistance TYP. MAX. UNIT IO 30 A I FSM 200 A 0.1 IR O Diode junction capacitance MIN. f=1MHz and applied 4V DC reverse voltage CJ Junction to ambient R θJA T STG Storage temperature Symbol Marking code Max. repetitive peak reverse voltage V RRM (V) Max. RMS voltage V RMS (V) Max. DC blocking voltage V R (V) MBR3040CT MBR3040CT 40 28 40 MBR3045CT MBR3045CT 45 31.5 45 Max. forward voltage @15A, T A = 25 OC V F (V) 10 150 pF O 30 -55 +175 C/W O C Max. Operating forward voltage temperature @15A, T A = 125 OC T J ( OC) V F (V) 0.70 0.57 0.79 0.70 MBR3060CT MBR3060CT 60 42 60 MBR3065CT MBR3065CT 65 45.5 65 MBR30100CT MBR30100CT 100 70 100 0.81 0.71 MBR30150CT MBR30150CT 150 105 150 0.87 0.77 MBR30200CT MBR30200CT 200 140 200 0.90 0.80 1 mA -55 ~ +150 -55 ~ +175 Document ID : DS-11K59 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C1 MBR3040CT THRU MBR30200CT 30A High Power Schottky Barrier Rectifiers ■ Rating and characteristic curves Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig.1 - Forward Current Derating Curve 240 Peak Forward Surge Current (A) Average Forward Current (A) 30.0 25.0 20.0 15.0 MBR3040CT~MBR30100CT 10.0 MBR30150CT~MBR30200CT single phase half wave 60Hz resistive or inductive load 5.0 0 25 50 75 100 125 150 175 200 160 120 80 40 0 1 10 Lead Temperature ( OC) Fig. 3A - Instantaneous Forward Characteristics Fig. 3B - Instantaneous Forward Characteristics 100 100 MBR3060CT ~ MBR30100CT Instantaneous Forward Current (A) Instantaneous Forward Current (A) MBR3040CT T J=125°C 10 T J=25°C 1 0 0.2 0.4 0.6 0.8 T J =125°C 10 T J =25°C 1 1.0 0 Instantaneous Forward Voltage (Volts) 0.2 0.4 0.6 0.8 1.0 Instantaneous Forward Voltage (Volts) Fig. 3C - Instantaneous Forward Characteristics Fig. 4 - Reverse Characteristics 100 100 Instantaneous Reverse Current (mA) MBR30150CT ~ MBR30200CT 50 Instantaneous Forward Current (A) 100 Number of Cycles at 60 Hz T J=125° C 20 10 5 2 T J=25°C O T J=100 C 10 T J=75 OC 1 0.1 O T J=25 C 0.01 1 0 0.2 0.4 0.6 0.8 0.001 0 1.0 20 40 60 80 10 0 12 0 140 Percent of Rated Peak Reverse Voltage ( %) Instantaneous Forward Voltage (Volts) 2 Document ID : DS-11K59 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C1 MBR3040CT THRU MBR30200CT 30A High Power Schottky Barrier Rectifiers ■ CITC reserves the right to make changes to this document and its products and specifications at any time without notice. ■ Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. ■ CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design. ■ CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. ■ No license is granted by implication or otherwise under any intellectual property rights of CITC. ■ CITC products are not authorized for use as critical components in life support devices or systems without express written approval of CITC. http://www.citcorp.com.tw/ Tel:886-3-5600628 Fax:886-3-5600636 Add:Rm. 3, 2F., No.32, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) 3 Document ID : DS-11K59 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C1