Optoway BTR-5820-SPG 1310 nm tx / 1490 nm rx , 3.3v / 155 mbps rohs compliant single-fiber transceiver Datasheet

Optoway
BTR-5820G
1
***********************************************************************************************************************************************************************
BTR-5820G / BTR-5820-SPG / BTR-5820AG / BTR-5820A-SPG
1310 nm TX / 1490 nm RX , 3.3V / 155 Mbps RoHS Compliant Single-Fiber Transceiver
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
l
l
l
l
l
l
l
l
l
The BTR-5820G series is high performance module for
single fiber communications by using 1310 nm transmitter
and 1490 nm receiver. This module is equipped with
3W-TRXTM OE device to reject 1.55 um high power
video signal. The transmitter section uses a multiple
quantum well 1310 nm laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated 1490 nm detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
Single Fiber Bi-Directional Transceiver
1310 nm LD Transmitter
1490 nm Receiver
1550 nm Video Block
Distance Up to 20 km
Industry Standard 1 x 9 Footprint
Single +3.3 V Power Supply
RoHS Compliant
LVPECL Differential Inputs and Outputs
0 to 70oC Operating : BTR-5820G
-20 to 85oC Operating : BTR-5820AG
Wave Solderable and Aqueous Washable
Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
l
l
l
l
WDM 155/622 Mb/s Links
SONET/SDH Equipment Interconnect
Fiber Channel 532 Mb/s Links
CATV
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
Distance
(km)
TX
(nm)
RX
(nm)
Voltage
(V)
Package
Temp
(oC)
622
622
20
20
1310
1310
1490
1490
3.3
3.3
1X9
1X9
0 to 70
-20 to 85
BTR-5820G
BTR-5820AG
TX
RX Sens. RoHS
Power
(dBm) Compliant
(dBm)
-8 to -14
-28
Yes
-8 to -14
-28
Yes
Note: 1. BTR-XXXXG is 1X9 SC receptacle type package.
2. BTR-XXXX-APBBBG is 1X9 pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
3. 3W-TRX TM is trade-mark co-owned by Zenko Technologies Inc. and Optoway Technology Inc.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
Power Supply Voltage
Input Voltage
--Vcc
---
Output Current
Iout
Min
-40
0
-20
Units
o
C
o
C
0
GND
Max
85
70
85
260
4.5
Vcc
0
30
mA
o
C
V
V
Notes
BTR-5820G
BTR-5820AG
10 seconds on leads only
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V1.0
Optoway
BTR-5820G
2
***********************************************************************************************************************************************************************
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Vcc
Topr
Data Rate
Power Supply Current
Icc
Min
3.13
0
-20
50
Typ
3.3
Max
3.47
70
85
650
260
622
Units
V
o
C / BTR-5820G
o
C / BTR-5820AG
Mb/s
mA
Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Total Jitter
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
Po
-14
---8
dBm
1
1260
1310
1360
nm
λ
----3
nm
RMS (σ)
∆λ
ER
8.2
----dB
Compliant with Bellcore GR-253-CORE and ITU recommendation G.957
tr
1.2
ns
10% to 90% Values
tf
1.2
ns
10% to 90% Values
RIN
-116
dB/Hz
TJ
0.55
ns
2
IIL
IIH
VIH - VIL
VIL - VCC
V IH - VCC
-350
350
300
-2.0
-1.1
-1.58
-0.74
µA
µA
mV
V
V
3
3
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
Electrical
Data Output Voltage – Low
Data Output Voltage – High
SD Output Voltage -- Low
SD Output Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
--Pin
Pa
Pd
-----------
-28
---28
--4.0
1500
dBm
dBm
dBm
dBm
dB
nm
dB
1
ORL
---3
---40
1.0
1480
14
V OL - VCC
V OH - VCC
V OL - VCC
V OH - VCC
-2.0
-1.1
-2.0
-1.1
-1.58
-0.74
-1.58
-0.74
V
V
V
V
Transition: low to high
Transition: high to low
2,3
4
4
4
4
Notes: 1. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS with 72 ones and 72 zeros.
2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.
3. At least 30 dB optical isolation for the wavelength 1550 to 1600 nm.
4. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.
**************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V1.0
Optoway
BTR-5820G
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND)
Receiver Data Out 2 (RD+)
Receiver Data Out Bar 3 (RD−)
Signal Detect 4 (SD)
Receiver Power Supply 5 (Rx Vcc)
Transmitter Power Supply 6 (Tx Vcc)
Transmitter Data In Bar 7 (TD−)
Transmitter Data In 8 (TD+)
Transmitter Signal Ground 9 (Tx GND)
PIN
1
2
3
4
5
6
7
8
9
Symbol
Rx GND
RD+
RD−
SD
Rx Vcc
Tx Vcc
TD−
TD+
Tx GND
N/C
TOP VIEW
N/C
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
See recommended circuit schematic
Active high on this indicates a received optical signal
+3.3V dc power for the receiver section
+3.3V dc power for the transmitter section
See recommended circuit schematic
See recommended circuit schematic
Directly connect this plan to the transmitter ground plane
RECOMMENDED CIRCUIT SCHEMATIC
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power
supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx
Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
**************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V1.0
Optoway
BTR-5820G
4
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) Pigtail Type
BTR-5820-SP50G / BTR-5820A-SP50G
Note: Length L is 50 ± 3 cm. Other pigtail’s length is available upon request.
2) Receptacle Type
BTR-5820G / BTR-5820AG
Note: Specifications subject to change without notice.
**************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V1.0
Similar pages