RoHS Compliant COAXIAL CONNECTORS 2008 CAT.NO.COAX-007A-E.FEB.2008 COAXIAL CONNECTORS CJ2 S e r i e s ■ FREQUENCY RANGE TO 3GHz ■ HIGH DENSITY MULTIPLE TYPE CJ2 Series The CJ2 series supports Futurebus+（IEC 1301.1 /IEEE.P896.2） high density multi pole packaging. The connectors of this series can mount up to six coaxial contacts on a housing the size of our MJ01 series IEC 61076-4-104 compliant 24 pin connectors. Hard Metric vertical back panel to board application. Easy to operate: several coaxial contacts can be simultaneously connected and disconnected on the board. ●Vertical board to board application with straight type（for back plane）and right-angle type（for daughter card）. ●Smooth coupling with a coupling guide that corrects for a misalignment up to 1 to 1.5 mm at the time of coupling. ●Can mount one to six coaxial contacts（through-hole plugs with two, four and six coaxial contacts） ●Applications：Base Station for Mobile Communications, Carrier Devices, Measuring Instruments ■SPECIFICATIONS Characteristic Impedance 50Ω Frequency Range DC to 3GHz D. W. Voltage AC500Vr.m.s.（1minute） Insulation Resistance 1000 megohms min.（DC500V） Contact Resistance Center Contacts : 50 milliohms max. Outer Contacts : 20 milliohms max. V. S. W. R. 1.3 max.（DC to 3GHz） Applicable Cables 0.8D-W, UT85 ■MATERIALS/FINISHES Description In addition to independent cable application type, we also harness products which satisfy your specification are available. Refer to pages 109 to 111 for details. Materials/Finishes Contacts Copper Alloy/Gold Plated over Nickel Insulator Plug Contact：PTFE Socket Contact：Polymethlpentene Housing Glass-filled LCP（Ivory） Ground Plate Copper Alloy /Tin Plated Sleeve Copper Alloy/Gold Plated over Nickel Ferrule Copper Alloy/Nickel Plated Clip Copper Alloy/Nickel Plated ■Guide to Operation Manuals When using any of these products, please confirm the following operation manuals. ・For 0.8DW cables : JAHL-2138-1 ・For 0.085 inch Semi-flexible cables: JAHL-2138-2 75 COAXIAL CONNECTORS CJ2 S e r i e s ■TYPES AND COMBINATIONS Dimensions in millimeters Jack （For Back Plane） Plug （For Daughter Card） ●Through-hole Solder・Right-angle P/N：2 Contacts・CJ2N001D000 P/N：4 Contacts・CJ2N002D000 P/N：6 Contacts・CJ2N003D000 ●Housing・Straight P/N：CMJ2-6S ●Contact P/N：CJ2F00※D＊＊ Daughter Board Back Board 13〜13.5 76 Reference Plane COAXIAL CONNECTORS CJ2 S e r i e s ■JACK（For Back Plane） Housing・Contact Intermatable with PLUG（78 Page） Dimensions in millimeters ■HOUSING Straight 6 Contacts Part Number：CMJ2-6S 11.51 φ3.15±0.1 7.41 11.8±0.1 4-R1 5.8±0.1 15.8±0.2 11.5 ＋0.3 −0.1 JAE 4±0.1 17±0.1 A 2 Ref. 4±0.1 4±0.1 8±0.1 （4×2） 20.25 Ref. 2.3±0.2 8±0.1 （4×2） 12max. φ2.71±0.05 3±0.1 9±0.1 （3×3） 8±0.1 3±0.05 4±0.05 4-R1±0.1 7.6 ＋0.2 0 9±0.1 BASE LINE 9 Ref. 11.8±0.1 2.8±0.05 PC BOARD LAYOUT・MOUNTING SIDE（REF.） （PC BOARD THICKNESS : 2.4mm min.） 3±0.1 9±0.1 11.7 ＋0.2 0 7-φ1.6 ＋0.02 −0.03 （UNPLATED HOLE） φB φ2.6 ＋0.05 0 φ2.17 ＋0.05 0 ■CONTACT 0 11.15 −0.25 A Ref. ■Part Number/Dimensions （Note）The picture on the right shows the CJ2F002D22. The shapes varies slightly for the CJ2F001DB1. Cable Type（Equivalent） Part Number A 0.8D-2W CJ2F002D22 21 Ref. 0.085 inch Flexible CJ2F001DB1 22 Ref. （Note）Procedure for wire connection…See pages 113 to 120 77 COAXIAL CONNECTORS CJ2 S e r i e s ■PLUG（For Daughter Card） Through-hole Solder Type Intermatable with JACK（77 Page） Dimensions in millimeters ■Right-angle 11.95 −0.1 ＋0.05 Part Number： 2 Contacts・CJ2N001D00 4 Contacts・CJ2N002D00 6 Contacts・CJ2N003D00 20.2 8±0.1 12.44 2.5 11.3 8.6 4±0.1 4±0.1 2±0.1 Contacts Insertion Position W0.33 4±0.1 9.5 8±0.1 8 2 Contacts 1.65 φ2.2 4 Contacts PC BOARD LAYOUT・MOUNTING SIDE（REF.） （PC BOARD THICKNESS : 1.6mm） 2 Contacts 3（3×1）±0.05 3±0.1 7±0.05 2-φ1.5 ＋0.1 0 （UNPLATED HOLE） 2±0.05 1±0.05 4±0.05 8（4×2）±0.05 6 Contacts φ2.05 ＋0.05 0 （UNPLATED HOLE） φ0.6±0.05 φ0.6±0.05 78 2-φ1.5 ＋0.1 0 （UNPLATED HOLE） φ2.05 ＋0.05 0 （UNPLATED HOLE） 3（3×1）±0.05 2±0.05 3±0.1 4±0.05 7±0.05 1±0.05 6 Contacts 8（4×2）±0.05 2±0.05 3（3×1）±0.05 4±0.05 8（4×2）±0.05 4 Contacts φ0.6±0.05 7±0.05 1±0.05 3±0.1 2-φ1.5 ＋0.1 0 （UNPLATED HOLE） φ2.05 ＋0.05 0 （UNPLATED HOLE） Before placing an order qThe values specified in this catalogue are only for reference. The products and specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. wUsers are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE s products to the equipment. eThe products presented in this catalogue are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. (1)Applications that require consultation: (i)Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii)We may separately give you our support with a quality assurance program that you specify, when you think of a use such as: Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2)Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc. 135 COAXIAL CONNECTORS 1-19, Aobadai 3-chome, Meguro-ku, Tokyo 153-8539, Japan Telephone： （81） 3-3780-2768 Facsimile： （81）3-3780-2883 http://www.jae.com http://www.jae-connector.com JAE Electronics, Inc. 142 Technology Drive, Suite 100 Irvine, California 92618-2430, U.S.A. Telephone： （1） 949-753-2600 Facsimile： （1）949-753-2699 （800）JAE-PART（523-7278） Toll free in U.S.A. except in California and Alaska JAE Europe, Ltd. Coliseum Business Center, Riverside Way, Camberley, Surrey GU15 3YL, U.K. Telephone： （44） 1276-404000 Facsimile： （44） 1276-404010 JAE Taiwan, Ltd. ＜Taipei Branch Office＞ 4F-1, No.88, Sec.2, Chung Hsiao E.Rd., Taipei, Taiwan, R.O.C. Telephone： （886） 2-2396-7676 Facsimile： （886） 2-2392-5929 JAE Hong Kong, Ltd. Suites 1407-11,14/F., Tower2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Telephone： （852） 2723-7782 Facsimile： （852） 2723-9028 JAE Shanghai Co., Ltd. RM1407, Shanghai Mart 2299 Yanan Road（West）Shanghai, 200336 P.R.C. Telephone： （86） 21-6236-0322 Facsimile： （86）21-6236-1292 JAE Singapore Pte Ltd. 33 Tannery Lane, ＃02-01 Hoesteel Industrial Building, Singapore 347789 Telephone： （65） 6748-1332 Facsimile： （65）6748-2920 JAE Korea, Inc. 1602, City Air Tower, 159-9, Samsung-dong, Gangnam-gu, Seoul, 135-973 Korea Telephone： （82） 2-551-8959 Facsimile： （82）2-551-8958 No part of this catalogue may be reproduced or distributed in any means, or stored in a data based or retrieval system, without the prior written permission of Japan Aviation Electronics Industry,Ltd.