P-DUKE MKC03-12DS15 3 watts dc-dc converter Datasheet

MCK03 SERIES
3 WATTS
DC-DC CONVERTER
FEATURES
• 3 WATTS REGULATED OUTPUT POWER
• OUTPUT CURRENT UP TO 0.5A
• STANDARD 1.25 X 0.80 X 0.40 INCH
• HIGH EFFICIENCY UP TO 80%
• 2:1 WIDE INPUT VOLTAGE RANGE
• FIVE-SIDED SHIELD
• FIXED SWITCHING FREQUENCY (300kHz)
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• OVER CURRENT PROTECTION
• OUTPUT 1 / OUTPUT 2 ISOLATION (DS TYPE)
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
OPTIONS
SMD TYPE, M1 TYPE
DESCRIPTION
The MKC03 series offer 3 watts of output power from a package in an IC
compatible 24pin DIP configuration without derating to 82ºC ambient
temperature. MKC03 series have 2:1 wide input voltage of 9~18, 18~36 and
36~75VDC.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output power
3 Watts, max.
Voltage accuracy
± 1%
Minimum load
Line regulation
0%
LL to HL at Full Load
Single
No Load to Full Load Dual
DS
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 0.2%
± 1%
± 1%
± 5%
20MHz bandwidth
See table
±0.02% / ºC, max.
Temperature coefficient
12VDC nominal input
24VDC nominal input
48VDCnominal input
Pi type
Input surge voltage
12VDC input
24VDC input
48VDC input
Start up time
Over load protection
180%
Maximum case temperature
GENERRALINPUT SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input (Output) to Case
500VDC
Isolation capacitance
Switching frequency
Safety approvals
See table
500VDC, min. 1minute
500VDC, min. 1minute
9
10 ohms, min.
300pF, max.
300kHz±10%
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Dimensions
Weight
MTBF (Note 1)
Page 1 of 3
DIP
SMD
MIL-HDBK-217F
Epoxy (UL94 V-0)
1.25 X 0.80 X 0.40 Inch
(31.8 X 20.3 X 10.2 mm)
16g (0.55oz)
18g (0.62oz)
7.213 x 106 hrs
Power up
350ms,max.
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
temperature
Continuous, automatics recovery
20mAp-p
Nominal Vin and
constant resistive load
200µs
% of FL at nominal input
36VDC 100ms,max.
50VDC 100ms,max.
100VDC 100ms,max.
Input reflected ripple current
Transient response recovery time 25% load step change
Short circuit protection
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
Input filter
± 0.2%
Load regulation
Ripple and noise
Input voltage range
Standard
M1 (Note 5)
-25ºC ~ +85ºC (with derating)
-40ºC ~ +85ºC (non-derating)
100ºC
Storage temperature range
Thermal impedance
-55ºC ~ +125ºC
Nature convection
20ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI
EN55022
ESD
EN61000-4-2
Radiated immunity
EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 6)
EN61000-4-4
± 2kV Perf. Criteria B
Surge (Note 6)
EN61000-4-5
± 1kV Perf. Criteria B
Conducted immunity
EN61000-4-6
10 Vr.m.s Perf. Criteria A
www.pduke.com
Class A
Air
Contact
± 8kV
Perf. Criteria A
± 6kV
2014/4/30
MCK03 SERIES
3 WATTS
Output Current
Min. load
Full load
DC-DC CONVERTER
(3)
(2)
(3)
(4)
No load
Input Current
Eff
(%)
Capacitor
Load max
50mVp-p
8mA
74
2200µF
50mVp-p
10mA
77
1000µF
250mA
50mVp-p
13mA
79
220µF
200mA
50mVp-p
13mA
80
150µF
0mA
± 250mA
50mVp-p
13mA
75
± 470µF
± 12 VDC
0mA
± 125mA
50mVp-p
16mA
80
± 100µF
± 15 VDC
0mA
± 100mA
50mVp-p
16mA
80
± 68µF
V1:5 VDC;V2:5 VDC
0mA
V1:250mA;V2:250mA
50mVp-p
18mA
75
V1:470µF;V2:470µF
MKC03-12DS12 9 ~ 18 VDC V1:12 VDC;V2:12 VDC
0mA
V1:125mA;V2:125mA
50mVp-p
18mA
80
V1:100µF;V2:100µF
MKC03-12DS15 9 ~ 18 VDC V1:15 VDC;V2:15 VDC
V1:68µF;V2:68µF
Model
Number
Input
Range
Output
Voltage
MKC03-12S33
9 ~ 18 VDC
3.3 VDC
0mA
500mA
MKC03-12S05
9 ~ 18 VDC
5 VDC
0mA
500mA
MKC03-12S12
9 ~ 18 VDC
12 VDC
0mA
MKC03-12S15
9 ~ 18 VDC
15 VDC
0mA
MKC03-12D05
9 ~ 18 VDC
± 5 VDC
MKC03-12D12
9 ~ 18 VDC
MKC03-12D15
9 ~ 18 VDC
MKC03-12DS05 9 ~ 18 VDC
Output
Ripple & Noise
0mA
V1:100mA;V2:100mA
50mVp-p
18mA
80
MKC03-24S33 18 ~ 36 VDC
3.3 VDC
0mA
500mA
50mVp-p
12mA
72
2200µF
MKC03-24S05 18 ~ 36 VDC
5 VDC
0mA
500mA
50mVp-p
12mA
74
1000µF
MKC03-24S12 18 ~ 36 VDC
12 VDC
0mA
250mA
50mVp-p
16mA
78
220µF
MKC03-24S15 18 ~ 36 VDC
15 VDC
0mA
200mA
50mVp-p
16mA
78
150µF
MKC03-24D05 18 ~ 36 VDC
± 5 VDC
0mA
± 250mA
50mVp-p
18mA
75
± 470µF
MKC03-24D12 18 ~ 36 VDC
± 12 VDC
0mA
± 125mA
50mVp-p
18mA
78
± 100µF
MKC03-24D15 18 ~ 36 VDC
± 15 VDC
0mA
± 100mA
50mVp-p
18mA
78
± 68µF
MKC03-24DS05 18 ~ 36 VDC V1:5 VDC;V2:5 VDC
0mA
V1:250mA;V2:250mA
50mVp-p
16mA
75
V1:470µF;V2:470µF
MKC03-24DS12 18 ~ 36 VDC V1:12 VDC;V2:12 VDC
0mA
V1:125mA;V2:125mA
50mVp-p
20mA
78
V1:100µF;V2:100µF
MKC03-24DS15 18 ~ 36 VDC V1:15 VDC;V2:15 VDC
0mA
V1:100mA;V2:100mA
50mVp-p
20mA
78
V1:68µF;V2:68µF
0mA
500mA
50mVp-p
8mA
76
2200µF
1000µF
MKC03-48S33 36 ~ 75 VDC
3.3 VDC
MKC03-48S05 36 ~ 75 VDC
5 VDC
0mA
500mA
50mVp-p
10mA
74
MKC03-48S12 36 ~ 75 VDC
12 VDC
0mA
250mA
50mVp-p
10mA
79
220µF
MKC03-48S15 36 ~ 75 VDC
15 VDC
0mA
200mA
50mVp-p
10mA
79
150µF
MKC03-48D05 36 ~ 75 VDC
± 5 VDC
0mA
± 250mA
50mVp-p
10mA
74
± 470µF
MKC03-48D12 36 ~ 75 VDC
± 12 VDC
0mA
± 125mA
50mVp-p
12mA
77
± 100µF
MKC03-48D15 36 ~ 75 VDC
± 15 VDC
0mA
± 100mA
50mVp-p
12mA
77
± 68µF
MKC03-48DS05 36 ~ 75 VDC V1:5 VDC;V2:5 VDC
0mA
V1:250mA;V2:250mA
50mVp-p
18mA
74
V1:470µF;V2:470µF
MKC03-48DS12 36 ~ 75 VDC V1:12 VDC;V2:12 VDC
0mA
V1:125mA;V2:125mA
50mVp-p
18mA
77
V1:100µF;V2:100µF
MKC03-48DS15 36 ~ 75 VDC V1:15 VDC;V2:15 VDC
0mA
V1:100mA;V2:100mA
50mVp-p
18mA
77
V1:68µF;V2:68µF
Note
1.
2.
3.
4.
5.
6.
MIL-HDBK-217F @Ta=25 ºC, Full load.
Typical value at nominal input and no load.
Typical value at nominal input and full load.
Test by minimum input and constant resistive load.
M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard.
An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Page 2 of 3
www.pduke.com
2014/4/30
MCK03 SERIES
3 WATTS
MECHANICAL DRAWING
DC-DC CONVERTER
:
DIP TYPE
SMD TYPE
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01 (0.25)
3. Pin dimension tolerance ±0.004 (0.1)
DIP PIN CONNECTION
PIN
1
2
3
10
11
12
SINGLE
+INPUT
NC
NC
-OUTPUT
+OUTPUT
-INPUT
Page 3 of 3
DUAL
+INPUT
-OUTPUT
COMMON
COMMON
+OUTPUT
-INPUT
DS
+INPUT
- V1 out
+ V1 out
- V2 out
+ V2 out
-INPUT
PIN
24
23
22
15
14
13
SINGLE
+INPUT
NC
NC
-OUTPUT
+OUTPUT
-INPUT
SMD PIN CONNECTION
DUAL
+INPUT
-OUTPUT
COMMON
COMMON
+OUTPUT
-INPUT
DS
+INPUT
- V1 out
+ V1 out
- V2 out
+ V2 out
-INPUT
PIN
1
2
3
10
11
12
Others
SINGLE
+INPUT
NC
NC
-OUTPUT
+OUTPUT
-INPUT
NC
www.pduke.com
DUAL
+INPUT
-OUTPUT
COMMON
COMMON
+OUTPUT
-INPUT
NC
DS PIN SINGLE
+INPUT 24 +INPUT
- V1 out 23
NC
+ V1 out 22
NC
- V2 out 15 -OUTPUT
+ V2 out 14 +OUTPUT
-INPUT 13 -INPUT
NC
DUAL
+INPUT
-OUTPUT
COMMON
COMMON
+OUTPUT
-INPUT
DS
+INPUT
- V1 out
+ V1 out
- V2 out
+ V2 out
-INPUT
2014/4/30
Similar pages