Incremental encoders Stainless steel housing, shaft with clamping flange Resolution 5...6000 pulses GE355 Features –– Encoder with clamping flange –– Stainless steel design –– Optical sensing –– Resolution max. 6000 ppr –– Clamping flange with shaft ø10 mm Technical data - mechanical design Voltage supply Housing ø58 mm Shaft ø10 mm (clamping flange) Flange Clamping flange Protection DIN EN 60529 IP 67 Operating speed ≤10000 rpm Starting torque ≤0.03 Nm IP 67 Rotor moment of inertia 14.5 gcm² Admitted shaft load ≤20 N axial ≤40 N radial Materials Housing: stainless steel 1.4305 Flange: stainless steel 1.4305 Operating temperature -25...+85 °C Relative humidity 95 % non-condensing Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Weight approx. 500 g E-connection Cable 1 m 5 VDC ±10 % 4.75...30 VDC Reverse polarity protection Yes (4.75...30 VDC) Consumption w/o load ≤30 mA (24 VDC) ≤60 mA (5 VDC) Resolution (steps/turn) 5...6000 Reference signal Zero pulse, width 90° Sensing method Optical Output frequency ≤150 kHz Output signals A 90° B, N + inverted Output circuit Linedriver RS422 Push-pull short-circuit proof Interference immunity DIN EN 61000-6-2 Emitted interference DIN EN 61000-6-4 Approval UL approval / E63076 1 www.baumerivo.com 30/10/2008 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. GE355 with clamping flange Incremental encoders Stainless steel housing, shaft with clamping flange Resolution 5...6000 pulses GE355 Part number GE355. A See part number (pulses) E-connection 31 Cable 1 m, axial 41 Cable 1 m, radial Voltage supply / signals 22 5 VDC / linedriver RS422 70 4.75...30 VDC / push-pull 72 4.75...30 VDC / linedriver RS422 (5 VDC) Flange / Shaft A Clamping flange / ø10 mm IP 67 Part number (pulses) 49 36 50 39 40 41 (5) (10) (25) (50) (60) (100) 57 06 09 13 14 15 (128) (200) (250) (360) (400) (500) 22 23 24 26 28 29 (1000) (1024) (1250) (1500) (2000) (2048) 30 31 34 35 48 (2500) (3600) (4096) (5000) (6000) 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Other pulse numbers upon request. Example: ordering key 23 = 1024 pulses Incremental encoders Stainless steel housing, shaft with clamping flange Resolution 5...6000 pulses GE355 Output signals Terminal assignment Clockwise rotating direction when looking at flange. Core colour Assignment pink Track B inv. Track A blue UB-Sense red Track N (zero pulse) black Track N inv. (zero pulse inv.) brown Track A green Track A inv. – – grey Track B – – Track A Track B Track B white/green GND white 90° GND-Sense brown/green UB Zero pulse UB-Sense and GND-Sense are directly connected to UB resp. GND. Please use cores twisted in pairs (for example track A / track A inv.) for extension cables of more than 10 m length 3 Outputs Linedriver RS422 Output level High >2.5 V (I = -20 mA) Output level Low <0.5 V (I = 20 mA) Load High <20 mA Load Low <20 mA Outputs Push-pull short-circuit proof Output level High >UB -3 V (I = -20 mA) Output level Low <0.5 V (I = 20 mA) Load High <20 mA Load Low <20 mA www.baumerivo.com Subject to modification in technic and design. Errors and omissions excepted. Trigger level 30/10/2008 Zero pulse Incremental encoders Stainless steel housing, shaft with clamping flange Resolution 5...6000 pulses GE355 Dimensions 15 ø10h8 10 20 9. Subject to modification in technic and design. Errors and omissions excepted. 13 4 www.baumerivo.com 30/10/2008 15 15 36f8 48 ±0.1 58 35 10 20 ø10h8 120° 35 9. 16 M3 x 5