NTF3055-100, NVF3055-100 Power MOSFET 3.0 Amps, 60 Volts N−Channel SOT−223 www.onsemi.com Designed for low voltage, high speed switching applications in power supplies, converters and power motor controls and bridge circuits. 3.0 A, 60 V RDS(on) = 110 mW Features • NVF Prefix for Automotive and Other Applications Requiring • N−Channel Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant D Applications • • • • G Power Supplies Converters Power Motor Controls Bridge Circuits S 4 MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating MARKING DIAGRAM & PIN ASSIGNMENT 1 Symbol Value Unit Drain−to−Source Voltage VDSS 60 Vdc Drain−to−Gate Voltage (RGS = 10 MW) VDGR 60 Vdc Gate−to−Source Voltage − Continuous − Non−repetitive (tp ≤ 10 ms) VGS ± 20 ± 30 Vdc Vpk Drain Current − Continuous @ TA = 25°C − Continuous @ TA = 100°C − Single Pulse (tp ≤ 10 ms) ID ID 3.0 1.4 9.0 Adc PD 2.1 1.3 0.014 W W W/°C A = Assembly Location WW = Work Week 3055 = Specific Device Code G = Pb−Free Package (Note: Microdot may be in either location) TJ, Tstg −55 to 175 °C ORDERING INFORMATION EAS 74 mJ Total Power Dissipation @ TA = 25°C (Note 1) Total Power Dissipation @ TA = 25°C (Note 2) Derate above 25°C Operating and Storage Temperature Range IDM Apk Drain 4 2 3 SOT−223 CASE 318E STYLE 3 1 Gate Thermal Resistance − Junction−to−Ambient (Note 1) − Junction−to−Ambient (Note 2) Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 10 seconds °C/W RqJA RqJA 72.3 114 TL 260 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 2 3 Drain Source Package Shipping† NTF3055−100T1G SOT−223 (Pb−Free) 1000 / Tape & Reel NTF3055−100T3G SOT−223 (Pb−Free) 4000 / Tape & Reel NVF3055−100T1G SOT−223 (Pb−Free) 1000 / Tape & Reel Device Single Pulse Drain−to−Source Avalanche Energy − Starting TJ = 25°C (VDD = 25 Vdc, VGS = 10 Vdc, IL(pk) = 7.0 Apk, L = 3.0 mH, VDS = 60 Vdc) AWW 3055G G †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 1. When surface mounted to an FR4 board using 1″ pad size, 1 oz. (Cu. Area 1.127 sq in). 2. When surface mounted to an FR4 board using minimum recommended pad size, 2−2.4 oz. (Cu. Area 0.272 sq in). © Semiconductor Components Industries, LLC, 2016 July, 2016 − Rev. 5 1 Publication Order Number: NTF3055−100/D NTF3055−100, NVF3055−100 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Characteristic Min Typ Max Unit 60 − 68 66 − − − − − − 1.0 10 − − ± 100 2.0 − 3.0 6.6 4.0 − − 88 110 − 0.27 0.24 0.40 − gfs − 3.2 − Mhos Ciss − 324 455 pF Coss − 35 50 Crss − 110 155 td(on) − 9.4 20 tr − 14 30 td(off) − 21 45 OFF CHARACTERISTICS Drain−to−Source Breakdown Voltage (Note 3) (VGS = 0 Vdc, ID = 250 mAdc) Temperature Coefficient (Positive) V(BR)DSS Zero Gate Voltage Drain Current (VDS = 60 Vdc, VGS = 0 Vdc) (VDS = 60 Vdc, VGS = 0 Vdc, TJ = 150°C) IDSS Gate−Body Leakage Current (VGS = ± 20 Vdc, VDS = 0 Vdc) IGSS Vdc mV/°C mAdc nAdc ON CHARACTERISTICS (Note 3) Gate Threshold Voltage (Note 3) (VDS = VGS, ID = 250 mAdc) Threshold Temperature Coefficient (Negative) VGS(th) Static Drain−to−Source On−Resistance (Note 3) (VGS = 10 Vdc, ID = 1.5 Adc) RDS(on) Static Drain−to−Source On−Resistance (Note 3) (VGS = 10 Vdc, ID = 3.0 Adc) (VGS = 10 Vdc, ID = 1.5 Adc, TJ = 150°C) VDS(on) Forward Transconductance (Note 3) (VDS = 8.0 Vdc, ID = 1.7 Adc) Vdc mV/°C mW Vdc DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance (VDS = 25 Vdc, VGS = 0 V, f = 1.0 MHz) Transfer Capacitance SWITCHING CHARACTERISTICS (Note 4) Turn−On Delay Time Rise Time Turn−Off Delay Time (VDD = 30 Vdc, ID = 3.0 Adc, VGS = 10 Vdc, RG = 9.1 W) (Note 3) Fall Time Gate Charge (VDS = 48 Vdc, ID = 3.0 Adc, VGS = 10 Vdc) (Note 3) tf − 13 30 QT − 10.6 22 Q1 − 1.9 − Q2 − 4.2 − − − 0.89 0.74 1.0 − trr − 30 − ta − 22 − tb − 8.6 − QRR − 0.04 − ns nC SOURCE−DRAIN DIODE CHARACTERISTICS Forward On−Voltage (IS = 3.0 Adc, VGS = 0 Vdc) (IS = 3.0 Adc, VGS = 0 Vdc, TJ = 150°C) (Note 3) Reverse Recovery Time (IS = 3.0 Adc, VGS = 0 Vdc, dIS/dt = 100 A/ms) (Note 3) Reverse Recovery Stored Charge 3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2.0%. 4. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 2 VSD Vdc ns mC NTF3055−100, NVF3055−100 6 6 5 VGS = 10 V ID, DRAIN CURRENT (AMPS) ID, DRAIN CURRENT (AMPS) VDS ≥ 10 V VGS = 5 V 4 3 VGS = 8 V VGS = 4.5 V 2 VGS = 6 V 1 VGS = 4 V 5 4 3 TJ = 25°C 2 TJ = 100°C 1 TJ = −55°C 0 0 0 1 3 2 3 4 3.5 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) TJ = 100°C 0.12 TJ = 25°C 0.08 TJ = −55°C 0.04 0.02 0 0 2 1 4 3 5 6 6 0.16 VGS = 15 V 0.14 TJ = 100°C 0.12 0.1 TJ = 25°C 0.08 0.06 TJ = −55°C 0.04 0.02 0 0 1 2 3 4 5 ID, DRAIN CURRENT (AMPS) Figure 3. On−Resistance versus Gate−to−Source Voltage Figure 4. On−Resistance versus Drain Current and Gate Voltage 6 1000 2.2 2 5.5 ID, DRAIN CURRENT (AMPS) VGS = 0 V ID = 1.5 A VGS = 10 V 1.8 IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) VGS = 10 V 0.06 5 Figure 2. Transfer Characteristics 0.16 0.1 4.5 VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) Figure 1. On−Region Characteristics 0.14 4 1.6 1.4 1.2 1 TJ = 150°C 100 TJ = 125°C TJ = 100°C 10 0.8 0.6 −50 1 −25 0 25 50 75 100 125 150 175 0 10 20 30 40 50 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current versus Voltage www.onsemi.com 3 60 800 700 C, CAPACITANCE (pF) VGS = 0 V VDS = 0 V VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) NTF3055−100, NVF3055−100 TJ = 25°C Ciss 600 500 Crss 400 Ciss 300 Coss 200 Crss 100 0 10 5 VGS 0 VDS 5 10 15 20 25 6 Q1 Q2 4 2 ID = 3 A TJ = 25°C 0 0 2 4 6 8 10 12 Figure 7. Capacitance Variation Figure 8. Gate−to−Source and Drain−to−Source Voltage versus Total Charge 3 IS, SOURCE CURRENT (AMPS) tf td(off) tr 10 td(on) 1 10 100 2 1 0 0.54 0.58 0.62 0.66 0.7 0.74 0.78 0.82 0.86 0.9 VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS) Figure 9. Resistive Switching Time Variation versus Gate Resistance Figure 10. Diode Forward Voltage versus Current 100 VGS = 20 V SINGLE PULSE TC = 25°C 10 1 1 ms 10 ms 0.1 0.01 0.1 VGS = 0 V TJ = 25°C RG, GATE RESISTANCE (W) RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 1 100 ms dc 10 100 EAS, SINGLE PULSE DRAIN−TO−SOURCE AVALANCHE ENERGY (mJ) t, TIME (ns) VGS 8 Qg, TOTAL GATE CHARGE (nC) VDS = 30 V ID = 3 A VGS = 10 V ID, DRAIN CURRENT (AMPS) QT 10 GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (VOLTS) 100 1 12 80 ID = 7 A 70 60 50 40 30 20 10 0 25 50 75 100 125 150 175 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) TJ, STARTING JUNCTION TEMPERATURE (°C) Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Avalanche Energy versus Starting Junction Temperature www.onsemi.com 4 r(t), EFFECTIVE TRANSIENT THERMAL RESPONSE RESISTANCE NTF3055−100, NVF3055−100 100 D = 0.5 10 0.2 0.1 0.05 0.02 1 0.01 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 t, TIME (s) Figure 13. Thermal Response www.onsemi.com 5 1 10 100 1000 NTF3055−100, NVF3055−100 PACKAGE DIMENSIONS SOT−223 (TO−261) CASE 318E−04 ISSUE N D b1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCH. 4 HE 1 2 MIN 1.50 0.02 0.60 2.90 0.24 6.30 3.30 2.20 0.85 0.20 1.50 6.70 STYLE 3: PIN 1. 2. 3. 4. GATE 0° DRAIN SOURCE DRAIN 3 b e1 e 0.08 (0003) A1 C q A q L L1 MILLIMETERS NOM MAX 1.63 1.75 0.06 0.10 0.75 0.89 3.06 3.20 0.29 0.35 6.50 6.70 3.50 3.70 2.30 2.40 0.94 1.05 −−− −−− 1.75 2.00 7.00 7.30 − DIM A A1 b b1 c D E e e1 L L1 HE E 10° MIN 0.060 0.001 0.024 0.115 0.009 0.249 0.130 0.087 0.033 0.008 0.060 0.264 0° INCHES NOM 0.064 0.002 0.030 0.121 0.012 0.256 0.138 0.091 0.037 −−− 0.069 0.276 − MAX 0.068 0.004 0.035 0.126 0.014 0.263 0.145 0.094 0.041 −−− 0.078 0.287 10° SOLDERING FOOTPRINT* 3.8 0.15 2.0 0.079 2.3 0.091 2.3 0.091 6.3 0.248 2.0 0.079 1.5 0.059 SCALE 6:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTF3055−100/D