Murata LQP03TN22NJ02 Chip inductor (chip coil) for high frequency film type Datasheet

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
Data Sheet
Chip Inductor (Chip Coil)
1
for High Frequency Film Type
LQP03T_02 Series (0201 Size)
■ Dimensions
■ Packaging
0.3±0.03
68 to 120nH
Polarity Marking
Colored Side
0.3±0.03
0.6 to 56nH
Polarity Marking
Colored Side
Packaging
Minimum Quantity
D
180mm Paper Tape
15000
J
330mm Paper Tape
50000
B
Bulk(Bag)
500
0.6±0.03
0.15±0.05
0.3±0.03
0.3±0.03
0.6±0.03
Code
0.15±0.05
(in mm)
■ Rated Value (p: packaging code)
Part Number
Inductance
Test Frequency
Rated Current
Max. of DC Resistance
Q (min.) Test Frequency
Self Resonance Frequency (min.)
LQP03TN0N6B02p
0.6nH±0.1nH
500MHz
850mA
0.07ohm
14
500MHz
6000MHz
LQP03TN0N6C02p
0.6nH±0.2nH
500MHz
850mA
0.07ohm
14
500MHz
6000MHz
LQP03TN0N7B02p
0.7nH±0.1nH
500MHz
800mA
0.08ohm
14
500MHz
6000MHz
LQP03TN0N7C02p
0.7nH±0.2nH
500MHz
800mA
0.08ohm
14
500MHz
6000MHz
LQP03TN0N8B02p
0.8nH±0.1nH
500MHz
800mA
0.08ohm
14
500MHz
6000MHz
LQP03TN0N8C02p
0.8nH±0.2nH
500MHz
800mA
0.08ohm
14
500MHz
6000MHz
LQP03TN0N9B02p
0.9nH±0.1nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN0N9C02p
0.9nH±0.2nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN1N0B02p
1.0nH±0.1nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN1N0C02p
1.0nH±0.2nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN1N1B02p
1.1nH±0.1nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN1N1C02p
1.1nH±0.2nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN1N2B02p
1.2nH±0.1nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN1N2C02p
1.2nH±0.2nH
500MHz
750mA
0.10ohm
14
500MHz
6000MHz
LQP03TN1N3B02p
1.3nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N3C02p
1.3nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N4B02p
1.4nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N4C02p
1.4nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N5B02p
1.5nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N5C02p
1.5nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N6B02p
1.6nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N6C02p
1.6nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N7B02p
1.7nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.1.13
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
Data Sheet
2
Continued from the preceding page.
Part Number
Inductance
Test Frequency
Rated Current
Max. of DC Resistance
Q (min.) Test Frequency
Self Resonance Frequency (min.)
LQP03TN1N7C02p
1.7nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N8B02p
1.8nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N8C02p
1.8nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N9B02p
1.9nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN1N9C02p
1.9nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN2N0B02p
2.0nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN2N0C02p
2.0nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN2N1B02p
2.1nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN2N1C02p
2.1nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN2N2B02p
2.2nH±0.1nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN2N2C02p
2.2nH±0.2nH
500MHz
600mA
0.15ohm
14
500MHz
6000MHz
LQP03TN2N3B02p
2.3nH±0.1nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N3C02p
2.3nH±0.2nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N4B02p
2.4nH±0.1nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N4C02p
2.4nH±0.2nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N5B02p
2.5nH±0.1nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N5C02p
2.5nH±0.2nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N6B02p
2.6nH±0.1nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N6C02p
2.6nH±0.2nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N7B02p
2.7nH±0.1nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N7C02p
2.7nH±0.2nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N8B02p
2.8nH±0.1nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N8C02p
2.8nH±0.2nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N9B02p
2.9nH±0.1nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN2N9C02p
2.9nH±0.2nH
500MHz
500mA
0.20ohm
14
500MHz
6000MHz
LQP03TN3N0B02p
3.0nH±0.1nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N0C02p
3.0nH±0.2nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N1B02p
3.1nH±0.1nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N1C02p
3.1nH±0.2nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N2B02p
3.2nH±0.1nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N2C02p
3.2nH±0.2nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N3B02p
3.3nH±0.1nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N3C02p
3.3nH±0.2nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N4B02p
3.4nH±0.1nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N4C02p
3.4nH±0.2nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N5B02p
3.5nH±0.1nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N5C02p
3.5nH±0.2nH
500MHz
450mA
0.25ohm
14
500MHz
6000MHz
LQP03TN3N6B02p
3.6nH±0.1nH
500MHz
400mA
0.30ohm
14
500MHz
6000MHz
LQP03TN3N6C02p
3.6nH±0.2nH
500MHz
400mA
0.30ohm
14
500MHz
6000MHz
LQP03TN3N7B02p
3.7nH±0.1nH
500MHz
400mA
0.30ohm
14
500MHz
6000MHz
LQP03TN3N7C02p
3.7nH±0.2nH
500MHz
400mA
0.30ohm
14
500MHz
6000MHz
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.1.13
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
Data Sheet
3
Continued from the preceding page.
Part Number
Inductance
Test Frequency
Rated Current
Max. of DC Resistance
Q (min.) Test Frequency
Self Resonance Frequency (min.)
LQP03TN3N8B02p
3.8nH±0.1nH
500MHz
400mA
0.30ohm
14
500MHz
6000MHz
LQP03TN3N8C02p
3.8nH±0.2nH
500MHz
400mA
0.30ohm
14
500MHz
6000MHz
LQP03TN3N9B02p
3.9nH±0.1nH
500MHz
400mA
0.30ohm
14
500MHz
5700MHz
LQP03TN3N9C02p
3.9nH±0.2nH
500MHz
400mA
0.30ohm
14
500MHz
5700MHz
LQP03TN4N3H02p
4.3nH±3%
500MHz
350mA
0.40ohm
14
500MHz
5300MHz
LQP03TN4N3J02p
4.3nH±5%
500MHz
350mA
0.40ohm
14
500MHz
5300MHz
LQP03TN4N7H02p
4.7nH±3%
500MHz
350mA
0.40ohm
14
500MHz
4400MHz
LQP03TN4N7J02p
4.7nH±5%
500MHz
350mA
0.40ohm
14
500MHz
4400MHz
LQP03TN5N1H02p
5.1nH±3%
500MHz
350mA
0.40ohm
14
500MHz
4200MHz
LQP03TN5N1J02p
5.1nH±5%
500MHz
350mA
0.40ohm
14
500MHz
4200MHz
LQP03TN5N6H02p
5.6nH±3%
500MHz
350mA
0.40ohm
14
500MHz
4000MHz
LQP03TN5N6J02p
5.6nH±5%
500MHz
350mA
0.40ohm
14
500MHz
4000MHz
LQP03TN6N2H02p
6.2nH±3%
500MHz
300mA
0.60ohm
14
500MHz
4000MHz
LQP03TN6N2J02p
6.2nH±5%
500MHz
300mA
0.60ohm
14
500MHz
4000MHz
LQP03TN6N8H02p
6.8nH±3%
500MHz
300mA
0.60ohm
14
500MHz
3900MHz
LQP03TN6N8J02p
6.8nH±5%
500MHz
300mA
0.60ohm
14
500MHz
3900MHz
LQP03TN7N5H02p
7.5nH±3%
500MHz
300mA
0.60ohm
14
500MHz
3700MHz
LQP03TN7N5J02p
7.5nH±5%
500MHz
300mA
0.60ohm
14
500MHz
3700MHz
LQP03TN8N2H02p
8.2nH±3%
500MHz
250mA
0.70ohm
14
500MHz
3600MHz
LQP03TN8N2J02p
8.2nH±5%
500MHz
250mA
0.70ohm
14
500MHz
3600MHz
LQP03TN9N1H02p
9.1nH±3%
500MHz
250mA
0.70ohm
14
500MHz
3300MHz
LQP03TN9N1J02p
9.1nH±5%
500MHz
250mA
0.70ohm
14
500MHz
3300MHz
LQP03TN10NH02p
10nH±3%
500MHz
250mA
0.70ohm
14
500MHz
3200MHz
LQP03TN10NJ02p
10nH±5%
500MHz
250mA
0.70ohm
14
500MHz
3200MHz
LQP03TN12NH02p
12nH±3%
500MHz
250mA
0.70ohm
12
500MHz
2900MHz
LQP03TN12NJ02p
12nH±5%
500MHz
250mA
0.70ohm
12
500MHz
2900MHz
LQP03TN15NH02p
15nH±3%
500MHz
250mA
0.70ohm
12
500MHz
2600MHz
LQP03TN15NJ02p
15nH±5%
500MHz
250mA
0.70ohm
12
500MHz
2600MHz
LQP03TN18NH02p
18nH±3%
500MHz
200mA
0.80ohm
12
500MHz
2200MHz
LQP03TN18NJ02p
18nH±5%
500MHz
200mA
0.80ohm
12
500MHz
2200MHz
LQP03TN22NH02p
22nH±3%
500MHz
150mA
1.90ohm
12
500MHz
2200MHz
LQP03TN22NJ02p
22nH±5%
500MHz
150mA
1.90ohm
12
500MHz
2200MHz
LQP03TN27NH02p
27nH±3%
500MHz
140mA
2.30ohm
12
500MHz
2000MHz
LQP03TN27NJ02p
27nH±5%
500MHz
140mA
2.30ohm
12
500MHz
2000MHz
LQP03TN33NJ02p
33nH±5%
300MHz
120mA
2.95ohm
9
300MHz
1700MHz
LQP03TN39NJ02p
39nH±5%
300MHz
120mA
3.00ohm
9
300MHz
1500MHz
LQP03TN47NJ02p
47nH±5%
300MHz
100mA
3.60ohm
9
300MHz
1300MHz
LQP03TN56NJ02p
56nH±5%
300MHz
100mA
3.90ohm
9
300MHz
1200MHz
LQP03TN68NJ02p
68nH±5%
300MHz
50mA
8.00ohm
8
300MHz
1100MHz
LQP03TN82NJ02p
82nH±5%
300MHz
50mA
10.0ohm
8
300MHz
1000MHz
LQP03TNR10J02p
100nH±5%
300MHz
40mA
10.0ohm
8
300MHz
900MHz
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.1.13
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
Data Sheet
4
Continued from the preceding page.
Part Number
LQP03TNR12J02p
Inductance
Test Frequency
Rated Current
Max. of DC Resistance
120nH±5%
300MHz
40mA
12.0ohm
Q (min.) Test Frequency
8
Self Resonance Frequency (min.)
300MHz
800MHz
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics (Typ.)
■ Inductance-Frequency Characteristics (Typ.)
1000
80
120nH
82nH
56nH
27nH
60
40
Inductance (nH)
Q
3.0nH
10nH
27nH
100
10nH
10
20
56nH
3nH
82nH
120nH
0
100
1000
Frequency (MHz)
1
100
10000
1000
Frequency (MHz)
10000
■ !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.1.13
http://www.murata.com/
Similar pages