COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Fiber Inspection and Cleaning Kits Key Features • Complete solution for inspecting and cleaning fiber connectors in a single kit • Easily inspect and clean both sides of fiber connections • Crisp, clear fiber end face images for detailed visual inspection of contamination • Portable, handheld probe and display • Highly effective cleaning tools • Precision inspection tips for different connectors and applications • Compact carrying case for portability and organization Applications • Easily inspects both sides (bulkhead and patch cord) of a fiber connection Dirt, dust, and other particles on fiber end faces are the primary causes of troubleshooting in optical networks. In addition, most field test failures can be attributed to dirty connectors. JDSU Fiber Inspection and Cleaning Kits enable quick and easy visual inspection to determine whether fiber connectors are truly clean before they are mated. Proactively inspecting and cleaning fiber connectors, enables technicians to reduce network troubleshooting and downtime, optimizes signal performance, and prevents network damage. JDSU provides the industry’s most complete solution for inspecting and cleaning fiber connectors with a combination of all the necessary equipment that technicians need to ensure the integrity of optical connections. These convenient kits address the vast array of inspection and cleaning needs in today’s field applications. • Provides a quick and easy cleaning solution for end face contaminants • Effectively remove stubborn contaminants with cleaning solvent WEBSITE : www.jdsu.com/test For inspection, each kit comes equipped with a probe microscope, a portable handheld HD3 video display, and eight precision inspection tips for various bulkhead and patch cord configurations. For cleaning, each kit includes two bulkhead/patch cord cleaning tools, connector cleaning solvent, and lint-free wipes. All contents are provided in a compact and secure carrying case, providing a safe, portable, and convenient solution for fiber technicians. FIBER INSPECTION AND CLEANING KITS 2 Kit Components Fiber Inspection The JDSU video fiber inspection probe and handheld display system is used to inspect both “male” (patch cord) and “female” (bulkhead) sides of a fiber interconnect. Both the probe and display fit comfortably in a users’ hand for portability and easy operation. Various interchangeable tips enable optimized inspection for different connector types and applications. The FBP series probe provides dual (200x and 400x) magnification and a selection of over 350 different inspection tips. FBE series probes provide a more economical option with single magnification (200x or 400x) and a selection of common tip configurations. Both configurations are hardwired with a compact HD3 series display, which includes a 1.8-inch TFT LCD to provide a portable inspection solution for fiber technicians. FBE Probe FBP Probe FBET Inspection Tip FBET-SC FBPT Inspection tip and Barrel Assembly Focus Control Recirculating focus wheel adjusts focus on the display screen AC Power/Charger Input Alternative AC power and battery charger input Focus Control Adjust focus on the display screen Magnification Control Switch between low & high magnification HD3 Display Probe Input 4-pin FBP Probe Input for stand-alone display Low Battery Indicator When lit, remaining battery life = 30 minutes Accessory Connection 1.8”TFT LCD Screen Power Mode Selector · ON mode for continuous ON · GripSwitch Mode designed to save battery life · Off/Charge Mode to turn power OFF or to CHARGE battery GripSwitch™ Press both sides to turn power ON and release to turn power OFF Hex Screw Remove to access battery compartment Microscope Display Compatability Patchcord Inspection Tips Bulkhead Inspection Tips Portable Cleaning Tool: Bulkhead/Patch Cord - 2.5 mm Portable Cleaning Tool: Bulkhead/Patch Cord - 1.25 mm Cleaning Solvent Cleaning Wipes Carrying Case FBE-SM1-C/FBE-SM2-C FBP-SM03-C FBE HD3 FBET Series (~30) Universal 1.25 mm Universal 2.5 mm Universal 2.5 mm APC SC, LC, FC, ST, SC/APC Yes Yes Yes Yes Yes FBP HD3 FBPT Series (350+) Universal 1.25 mm Universal 2.5 mm Universal 2.5 mm APC SC, LC, FC, ST, SC/APC Yes Yes Yes Yes Yes FIBER INSPECTION AND CLEANING KITS 3 Fiber Cleaning Tools IBC™ brand cleaners are dry cloth cleaners specifically designed to clean either side of a fiber connection. For cleaning connectors behind a bulkhead, simply insert the device into the bulkhead until a click sound is heard. For cleaning patch cords, the dust cap acts as an adapter to receive the connector ferrule. These tools are simple to use and highly effective at removing oil and dust contaminants. Optical-grade cleaning solvent and lint-free wipes remove stubborn contaminants FCC2™ optical-grade solvent is designed specifically for cleaning optical connectors. Electrically conductive, this solvent is ideal and effective at removing stubborn forms of debris by dissipating static charges that bind particulate to connector end faces. Ideal for wet-to-dry cleaning procedures, this fast-drying solvent is nonflammable, nontoxic, noncorrosive, and safe to use. IBC Cleaner (1.25 mm) IBC Connector cleaner (Universal 2.5 mm) Specifications FBE Probe Inspection Tip Compatibility Dimensions Detection w/ HD3 display Low Mag (HFOV) High Mag (HFOV) Weight Cord Length Camera Type Light Source Lighting Technique Power Source FBET Series tips 12.5 x 3.3 x 3.2 cm (5 x 1.32 x 1.28 in) <1 µm 550 µm 350 µm 180 g (6.35 oz) 240 cm (7.87 ft) coil 1/3” CMOS Sensor Blue LED, 100,000+ hour life Coaxial From HD3 display Detection w/ HD3 display Low Mag (HFOV) High Mag (HFOV) Weight Cord Length Camera Type Light Source Lighting Technique Power Source Cleaning Solvent Dimensions Technical Details Chemical Family HFC solvent Appearance Clear, colorless liquid Odor Slight, ethereal Boiling Point 45°C / 113°F Solvency & Cleaning Data Vapor Pressure (mmHg @ 20°C) 310 Percent Volatile 100% Specific Gravity 1.34 pH Neutral Health, Safety & Environmental Data Toxicity ppm, 8-Hr TWA, PEL See MSDS Flashpoint (TCC) None Flammability Nonflammable NFPA Health: 1; Fire 0; Reactivity: 1 Ozone Impact Zero RoHS and WEEE Compliant Yes SNAP Approved Yes Safe for Travel Yes 10 x 7 x 4.3 cm (3.9 x 2.8 x 1.7 in) Weight 150 g (5 oz) w/ Hanging accy Screen Size 4.6 cm (1.8 in) Power Source Built-in rechargeable NiMH (nickel metal hydride), 800 mAH battery of AC adapter (100-200 VAC/12 VDC) Power Mode ON (continuous on) ON/GRIP (GripSwitch power save mode) OFF/CHARGE (power off or charge) Portable Cleaning Tools Compatibility FBP Probe Inspection Tip Compatibility Dimensions HD3 Display FBPT Series tips 14.0 x 4.6 x 4.4 cm (5.5 x 1.8 x 1.7 in) <1 µm 550 µm 350 µm 180 g (6.35 oz) 240 cm (7.87 ft) coil 1/3” CMOS Sensor Blue LED, 100,000+ hour life Coaxial From HD3 display 1.25 mm Version (LC, MU) 2.5 mm Version (SC, FC, ST) Cleanings per unit 525+ Impact resistance: Up to 6 feet Operating Temperature Range -10 to +60°C (14 to 140°F) Crush resistance up to 20.4 kg (45 lbs) Effective at removing: Debris, dust, skin oil, 70% IPA residue, hand lotion, distilled water residue, salt residue Lint-Free Cleaning Wipes Material Dimensions (in tub) Quantity (per tub) Soft, hydroentangled polyester fabric 5 x 10.80 cm (2 x 4.25 in) 90 FIBER INSPECTION AND CLEANING KITS Ordering Information Inspection and Cleaning Kits FBE-SM1-C FBE-SM2-C FBP-SM03-C Fiber Inspection and Cleaning Kit, 200X FBE probe, hardwired to HD3 display. Includes SC, LC, FC, ST, SC-APC, U25M, U25MA, and U12M tips, bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm), soft case, and power supply/charger Fiber Inspection and Cleaning Kit, 400X FBE probe, hardwired to HD3 display.Includes SC, LC, FC, ST, SC-APC, U25M, U25MA, and U12M tips, bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm), soft case, and power supply/charger Fiber Inspection and Cleaning Kit, 200X/400X FBP probe, hardwired to HD3 display. Includes SC, LC, FC, ST, SC-APC, U25M, U25MA, and U12M tips, bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm), carrying case, and power supply/charger Accessories Supplemental Cleaning Tools and Consumables FCB-IBC12-10 Fiber cleaning tool, IBC, bulkhead and patch cord, 1.25 mm ferrules, 10-Pack FCB-IBC25-10 Fiber cleaning tool, IBC, bulkhead and patch cord, 2.5 mm ferrules, 10-Pack FCR-001 Fiber cleaning tool, CleanCheck, patch cord FCR-CLN-01 Fiber Field Cleaning Consumables Kit FCR-FCC-01 Fiber Cleaning Consumables (Solvent & Wipes) Bulk Refill Pack Supplemental Inspection Tips and Adapters FBPT-E2000 Tip, E2000 bulkhead, for FBP video fiber microscope FBPT-FC Tip, FC bulkhead, for FBP video fiber microscope FBPT-LC Tip, LC bulkhead, for FBP video fiber microscope FBPT-LC-L Tip, LC long reach for FBP video fiber microscope FBPT-MTP Tip, MTP/MPO multimode bulkhead, for FBP video fiber microscope FBPT-MTPA Tip, MTP/MPO single-mode bulkhead, for FBP video fiber microscope FBPT-SC Tip, SC bulkhead, for FBP video fiber microscope FBPT-SC-APC Tip, SC-APC bulkhead, for FBP video fiber microscope FBPT-SC-A6 Tip, SC bulkhead, for FBP video fiber microscope, angled 60° FBPT-ST Tip, ST bulkhead, for FBP video fiber microscope FBPT-ST-A6 Tip, ST bulkhead, for FBP video fiber microscope, angled 60° FBPT-U12M Tip, universal 1.25 mm patch cord for FBP video fiber microscope FBPT-U25M Tip, universal 2.5 mm patch cord for FBP video fiber microscope FBPT-U25MA Tip, universal 2.5 mm APC patch cord for FBP video fiber microscope FBPT-UFMA Universal flare adapter, connects FMA adapters to FBP probe * For additional information on tips and accessories not listed above, please contact a JDSU sales representative. Test & Measurement Regional Sales NORTH AMERICA TOLL FREE : 1 866 228 3762 FAX : +1 301 353 9216 LATIN AMERICA TEL : +55 11 5503 3800 FAX : +55 11 5505 1598 ASIA PACIFIC TEL : +852 2892 0990 FAX : +852 2892 0770 Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation EMEA TEL : +49 7121 86 2222 FAX : +49 7121 86 1222 July 2008 www.jdsu.com/test 30149492 000 0708 CLEANKIT.DS.FOP.TM.AE