PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 26 x 16 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product B65672B50000000 B65671D0000R026 B65671D0000R048 Date of Withdrawal 2004-10-18 2002-08-02 Deadline Last Orders 2005-03-31 2002-12-31 Last Shipments 2005-09-30 2003-03-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. P 26 × 16 Core B65671 17,7 _ 0,7 Approx. weight (per set) m 21 23 g ø11,5 _ 0,4 ø5,4+0,2 11+0,4 0,6+0,2 mm–1 mm mm2 mm2 mm3 0,37 40 108 87 4 320 0,4 37,2 93 76,5 3 460 16,3 _ 0,4 Σl/A le Ae A min Ve s with without center hole center hole 3,1±0,15 26 _ 1 Magnetic characteristics (per set) 21,2+0,8 3,9+0,6 ■ In accordance with IEC 60133 ■ Pot cores are supplied in sets M3 FPK0136-N Gapped Material AL value µe s approx. mm nH Ordering code 1) -D with center hole -T with threaded sleeve K1 100 ± 3 % 0,90 32 B65671-+100-A1 M33 100 ± 3 % 160 ± 3 % 1,52 0,78 32 51 B65671-+100-A33 B65671-+160-A33 0,80 0,40 0,34 0,24 0,15 0,11 0,10 51 80 100 127 201 255 319 B65671-+160-G48 B65671-+250-G48 B65671-+315-G48 B65671-+400-A48 B65671-+630-A48 B65671-+800-A48 B65671-D1000-J48 N48 160 ± 250 ± 315 ± 400 ± 630 ± 800 ± 1000 ± 2% 2% 2% 3% 3% 3% 5% Ungapped Material AL value µe nH AL1min PV nH W/set Ordering code -D with center hole -W without center hole N26 4900 + 30/– 20 % 1560 B65671-D-R26 N30 9700 + 30/– 20 % 2860 B65671-W-R30 T38 22000 + 40/– 30 % 6480 N87 5500 + 30/– 20 % 1620 3050 B65671-W-Y38 < 1,9 B65671-W-R87 (200 mT, 100 kHz, 100 °C) 1) Replace the + by the code letter ”D“ or ”T“ for the required version. 343 08/01 P 26 × 16 Accessories B65672 Coil former Standard: Material: Winding: to IEC 60133 GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black see “Processing Notes”, page 155 Insulating washer 1 between core and coil former ■ For tolerance compensation and for insulation ■ Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,06 mm thick Insulating washer 2 between core and terminal carrier ■ For increased dielectric strength ■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E Coil former 120 °C), 0,08 mm thick Ordering code Sections AN mm2 lN mm A R value µΩ 1 32,0 52 55 B65672-B-T1 Insulating washer 1 (reel packing, PU = 1 reel) B65672-B5000 Insulating washer 2 (bulk) B65672-A5002 Coil former ø11,7+0,15 2,5+0,8 20,9 _ 0,2 ø12,8 _ 0,15 AN 0,6 10,8 _ 0,15 FPK0269-6 3,6 _ 0,2 8+0,2 26 _ 0,5 Insulating washer 2 ø11,3±0,2 ø21,6±0,2 3,6 Insulating washer 1 23 _ 0,5 1,6±0,2 FPK0138-5 FPK0139-D 344 08/01 P 26 × 16 Accessories B65675 Mounting assembly for printed circuit boards ■ The set comprises a terminal carrier and a yoke ■ For snap-in connection Terminal carrier Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code gray Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Yoke Spring yoke, made of tinned nickel silver (0,4 mm), with ground terminal Complete mounting assembly (8 solder terminals) Ordering code: B65675-B5 Grounding pin This recess must be on the side of the grounding pin to ensure that the yoke locks into position. Hole arrangement View in mounting direction Ground a) Yoke b) Terminal carrier with 8 solder terminals 345 08/01 P 26 × 16 B63399 Accessories B65679 Adjusting screw ■ Tube core with thread and core brake made of GFR polyterephthalate Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Core P 26 × 16 Material N 48 Adjusting screw Min. adjusting range Ordering code Tube core ∅ × length mm Material 250 315 4,55 × 6,3 N 22 red 16 13 B65679-E3-X22 315 400 4,98 × 6,3 N 22 black 23 18 B65679-E2-X22 630 800 5,15 × 6,3 N 22 white 16 14 B65679-E1-X22 A L value nH Color code % Adjusting screw B63399-B1 Handle B63399-B5 Adjusting screw 1) 1) Due to the limited distance between adjusting screw and internal borehole, the entire assembly must be accurately centered. 346 08/01 Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1