E 1 A TH R U E 1 M GLASS PASSIVATED SUPER FAST RECOVERY RECTIFIER R Reverse Voltage: 50 to 1000 Volts Forward Current:1.0Ampere S E M I C O N D U C T O R FEATURES SOD-123FL Glass passivated junction JF For Surface Mount Applications, Easy to pick and place 0.039(1.00 ) 0.020(0.50) Plastic package has Underwriters Laboratory Flammability 0.077(1.95 ) 0.054(1.38) Classification 94V-0 High temperature soldering guaranteed:260°C/10 seconds at terminals, Component in accordance to RoHS 2011/65/EU 0.114(2.90 ) 0.098(2.50) 0.154(3.90) 0.138(3.50) 5° MECHANICAL DATA 0.010(0.25) MAX 0.052(1.33) 0.031(0.8) Case: SOD-123FL molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 0.010(0.25) MIN Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) Weight: 0.01 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating at 25°C ambient temperature unless otherwise specified.Single phase ,half wave ,60HZ,resistive or inductive load. For capacitive load,derate current by 20%.) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL=100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0 A Maximum DC Reverse Current TA=25°C at rated DC blocking voltage TA=125°C Symbols E1A E1B E1D E1G E1J E1K E1M Units VRRM VRMS VDC 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 Volts Volts Volts I(AV) 1.0 Amps IFSM 30.0 Amps VF 0.95 1.3 1.70 Volts 5.0 A IR Thermal resistance from junction to ambient Maximum reverse recovery time(Note1) Typical junction capacitance(Note2) Operating junction and storage temperature range 100 R 150 JA trr CJ TJ ℃/W 35 ns 15.0 pF -55 to+150 °C TSTG Note: 1.Test conditions: IF=0.5A,IR=1.0A,IRR=0.25A. 2.Measured at 1MHZ and applied reverse voltage of 4.0 Volts D.C. JINAN JINGHENG ELECTRONICS CO., LTD. 2-1 HTTP://WWW.JINGHENG.CN RATINGS AND CHARACTERISTIC CURVES E1A THRU E1M FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.0 50 0.8 0.6 0.4 SINGIE PHASE HAIF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 0.2 0 0 25 50 75 100 125 150 175 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT (A) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 30 20 10 0 LEAD TEMPERATURE (°C) 1 2 4 6 8 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERE CHARACTERISTICS INSTANTANEOUS REVERE LEAKAGE CURRENT(MICRO AMPER) INSTANTANEOUS FORWARD CURRENT( AMPERES) 100 10 3 1 0.3 0.1 TJ=25°C Pulse Width=300µs 1% Duty Cycle 0.03 10 1 TJ=125°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TJ=150°C 1.8 0.1 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0 40 20 60 80 100 110 PERCENT OF RATED PEAK REVERE VOLTAGE,% FIG.6-TEST CIRCUIT DIAGRAM AND REVERE RECOVERY TIME CHARACTERISTIC JUNCTION CAPACITANCE(pF) FIG.5-TYPICAL JUNCTION CAPACITANCE 200 100 50W 10W NONINDUCTIVE NONINDUCTIVE trr +0.5A 60 40 (＋) D.U.T. PULSE GENERATOR (NOTE2) 50Vdc 20 (－) 10 TJ=25°C 6 0 -0.25A (ADJUSTABLE) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE1) 4 NOTES:1.Rise Time=7ns max. input lmpedance=1 megohm 22pF 2.Rise Time=10ns max. source lmpedance =50 ohms 2 1 0.1 0.2 0.4 1 2 4 10 20 40 100 REVERE VOLTAGE. (V) JINAN JINGHENG ELECTRONICS CO., LTD. 2-2 HTTP://WWW.JINGHENG.CN -1.0A 1cm SET TIME BASE FOR 50/100 ns/cm