rev.2.1 18.11.15 CW532HT-1 Green DPSS Laser Module 532 nm, <1 mW Operating Temperature 10 - 50 °C Automatic Power Control 3 VDC Input Voltage IR Filter Description CW532HT-1 is a compact size fix collimated 532 nm diode pumped solid state (DPSS) Nd:YVO4+KTP laser module with extended operating temperature range of 10-50°C, and an optical output power of <1 mW. It features automatic power control (APC) driving electronics for stable operation, an IR filter to block residue IR radiation, and is designed for 3 VDC supply voltage. CW532HT-1 comes equipped with a coaxial power connector. A matching power supply and suitable heat sink is optionally available for quick setup and convenient operation (see page 3 for details). Maximum Ratings (T CASE = 25°C) Min. Values Max. Operating temperature + 10 + 50 °C Storage temperature - 20 + 80 °C Parameter Unit Electro-Optical Characteristics (T Parameter Peak Wavelength CASE = 25°C) Min. Values Typ. Max. 531 532 533 nm 1 mW Radiated Power Beam diameter at aperture 1.5 Transverse mode Unit mm TEM00 Warm up time <3 s Beam divergence 1.0 mrad Operating Current Supply Voltage 250 2.2 Material body Connector MTTF www.roithner-laser.com 3.2 VDC brass Material lens Dimensions mA 3 acryl Ø 12 x 31.3 (51.3) mm IEC 60130-10, Type A, 5.5/2.1 mm 3000 h 1 Ø4.0 Ø12.0 Outline Dimensions 31.3±0.5 20.0 ~ 300 all dimensions in mm Electrical Connection (IEC 60130-10, Type A, 5.5/2.1 mm) GND + VDC Precautions Static Electricity: Precautions against electrostatic discharge (ESD) must be taken when handling or operating the module. Surge voltage or electrostatic discharge can result in complete failure of the laser diode. Heat Sinking: In order to maintain lifetime and stability of the laser diode it is essential to provide efficient heat management. For long time stable operation proper contact between laser module and heat sink is mandatory. Safety: This laser module emits highly concentrated visible light which can be hazardous to the human eye and skin. It is classified as CLASS 2 laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Actual laser light emitted and precautions necessary strongly depend on mode of operation. www.roithner-laser.com 2 Accessories Laser Power Supply LPS31 110-230 VAC universal input voltage Small ripple (<80 mV) AC Europlug (CEE7/16) ON/OFF switch IEC 60130-10 Type A connector Output 3 VDC, max. 1 A Aluminium, black anodized 50 x 50 x 34 mm 114 g Clamping mechanism Power Supply LPS31 Heat Sink SQ50x34 © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice www.roithner-laser.com 3