EPCOS B43501A3477M007 Snap-in capacitors long useful life - 85 Datasheet

Snap-In Capacitors
B43501
Long Useful Life – 85 °C
B43501
Long-life grade capacitors
Applications
■ Switch-mode power supplies in industrial
and entertainment electronics
■ Frequency converters
Features
■
■
■
■
■
Long useful life
High reliability and high ripple current capability
Low equivalent series resistance ESR
High CU product, i.e. compact
Different case sizes available for each capacitance value
Construction
■
■
■
■
■
■
Charge-discharge proof, polar
Aluminum case, fully insulated
Snap-in solder pins to hold component in place on PC-board
Minus pole marking on case surface
Minus pole not insulated from case
Overload protection (safety vent)
Terminals
■ Standard version with 2 terminals
2 lengths available: 6,3 and 4,5 mm
■ 3 terminals: length 4,5 mm
(terminal arrangement ensures correct insertion)
235 10/02
B43501
Long Life – 85 °C
Specifications and characteristics in brief
Rated voltage UR
160 … 450 VDC
Surge voltage US
1,15 · UR (for UR ≤ 250 VDC)
1,10 · UR (for UR ≥ 385 VDC)
Rated capacitance CR
47 … 2 200 µF
Capacitance tolerance
± 20 %
Leakage current IL
M
(5 min, 20 °C)
C R U R 0,7
I L ≤ 0,3 µA ⋅ æè ------- ⋅ ------- öø + 4 µA
µF V
Self-inductance LESL
Approx. 20 nH
Useful life
85 °C; UR; I~R
40 °C; UR; 1,4 · I~R
> 10 000 h
> 200 000 h
Requirements:
Vibration resistance
IEC climatic category
Detail specification
Sectional specification
≤ ± 30 % of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Failure percentage: ≤ 1 %
Failure rate:
≤ 50 fit (≤ 50 · 10 –9/h)
(for definiton “fit”, refer to chapter “Quality”, page 62)
Post test requirements:
Voltage endurance test
85 °C; UR
∆C/C
ESR
IL
∆C/C
≤ ± 10 % of initial value
ESR
≤ 1,3 times initial specified limit
IL
≤ initial specified limit
To IEC 60068-2-6, test Fc:
displacement amplitude 0,35 mm, frequency range 10 … 55 Hz,
acceleration max. 5 g, duration 3 × 2 h
To IEC 60068-1:
UR ≤ 400 VDC: 40/085/56 (– 40°C/+ 85°C/56 days damp heat test)
UR ≥ 420 VDC: 25/085/56 (– 25°C/+ 85°C/56 days damp heat test)
Similar to CECC 30301-811
IEC 60384-4
5 000 h
236 10/02
B43501
Long Life – 85 °C
Dimensional drawings
Minus pole marking
Minus pole marking
Mounting
holes
Mounting
holes
KAL0140-J
KAL0324-F
Snap-in terminals, standard (length 6,3 ± 1 mm).
Also available in a shorter version with a length
of 4,5 –1 mm. For packing mode and ordering
example see next page.
Snap-in capacitors are also available with
3 terminals (length 4,5 –1 mm).
For packing mode and ordering example see
next page.
Dimensions (mm)
d+1
l±2
22
25
22
30
22
35
22
40
Approx.
Packing units
weight (g) (pieces)
Dimensions (mm)
d+1
l±2
Approx.
Packing units
weight (g) (pieces)
9
12
15
18
160
160
160
160
25
25
25
25
13
17
19
22
130
130
130
130
30
30
30
30
30
30
25
30
35
40
45
50
17
23
29
36
41
47
80
80
80
80
80
80
35
35
35
35
35
40
45
50
36
41
57
72
60
60
60
60
25
30
35
40
237 10/02
B43501
Long Life – 85 °C
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in
part) in the correct position for insertion.
Ordering codes
Snap-in terminals
Version
Identification in 3rd block of ordering code
Standard terminals (6,3 ± 1) mm
M000
Short terminals (4,5 −1) mm
M007
3 terminals (4,5 −1) mm
M002
Ordering example:
B43501A3107M007
B43501A3107M002
}
}
snap-in capacitor with short terminals
snap-in capacitor with 3 terminals
238 10/02
B43501
Long Life – 85 °C
Overview of available types
UR (VDC)
160
CR (µF)
Case dimensions d × l (mm)
200
250
385
400
420
22 × 25
47
22 × 30
25 × 25
68
22 × 25
22 × 25
100
22 × 30
25 × 25
22 × 30
25 × 25
22 × 30
25 × 25
22 × 40
25 × 30
22 × 35
22 × 40
30 × 25
25 × 30
22 × 40
25 × 35
25 × 30
30 × 33
120
22 × 25
150
30 × 30
180
220
22 × 25
22 × 25
22 × 30
25 × 25
25 × 40
30 × 30
22 × 30
22 × 30
25 × 25
22 × 40
25 × 30
22 × 35
22 × 40
30 × 25
25 × 40
30 × 30
560
680
25 × 35
1 000
30 × 35
1 500
2 200
30 × 45
35 × 50
25 × 40
30 × 30
30 × 40
35 × 35
25 × 40
30 × 35
30 × 35
35 × 30
30 × 50
30 × 45
35 × 35
30 × 50
35 × 40
35 × 45
35 × 45
35 × 45
35 × 50
35 × 50
30 × 40
390
470
25 × 40
30 × 35
30 × 35
270
330
450
30 × 45
22 × 40
25 × 30
30 × 25
25 × 40
30 × 30
30 × 35
30 × 40
30 × 45
35 × 40
35 × 50
30 × 40
35 × 40
35 × 45
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
239 10/02
B43501
Long Life – 85 °C
Technical data and ordering codes
UR
Case
dimensions
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
160
220
330
22 × 25
22 × 30
530
360
910
610
730
490
2,4
3,2
1,1
1,4
B43501A1227M000
B43501A1337M000
470
680
22 × 35
25 × 35
250
180
430
300
350
240
4,0
5,2
1,8
2,4
B43501A1477M000
B43501A1687M000
1 000
30 × 35
120
200
160
6,9
3,1
B43501A1108M000
1 500
30 × 45
80
140
120
9,2
4,2
B43501A1158M000
2 200
35 × 50
60
91
80
220
22 × 25
380
610
490
330
330
22 × 30
25 × 25
260
260
410
410
470
470
22 × 40
30 × 25
180
180
680
680
25 × 40
30 × 30
1 000
1 000
30 × 40
35 × 35
200
250
I~max
100 Hz
40 °C
A
Ordering code 2)
I~R1)
100 Hz
85 °C
A
CR
100 Hz
20 °C
VDC µF
13
5,8
B43501A1228M000
2,4
1,1
B43501A2227M000
330
330
3,2
3,2
1,4
1,5
B43501A2337M000
B43501J2337M000
290
290
240
350
4,2
4,2
1,9
1,9
B43501A2477M000
B43501J2477M000
130
130
200
200
160
160
5,5
5,4
2,5
2,4
B43501A2687M000
B43501J2687M000
83
83
140
140
120
120
7,2
7,6
3,3
3,5
B43501A2108M000
B43501J2108M000
1 500
35 × 45
56
90
80
4,6
B43501A2158M000
150
22 × 25
560
890
800
2,0
0,91
B43501B2157M000
220
22 × 30
380
610
500
2,6
1,2
B43501B2227M000
220
25 × 25
380
610
490
2,6
1,2
B43501K2227M000
330
330
22 × 40
25 × 30
260
260
410
410
330
330
3,5
3,4
1,6
1,6
B43501B2337M000
B43501K2337M000
470
470
680
25 × 40
30 × 30
30 × 40
180
180
130
290
290
200
240
240
160
4,5
4,5
5,9
2,1
2,0
2,7
B43501B2477M000
B43501K2477M000
B43501B2687M000
1 000
35 × 40
83
140
120
8,0
3,6
B43501B2108M000
10
Preferred types
1) 120 Hz conversion factor of ripple current: I~ (120 Hz) = 1,03 · I~ (100 Hz)
2) Ordering code for standard terminals (6,3 mm).
To determine the ordering code for short terminals (4,5 mm) and 3 terminals (4,5 mm) see page 238.
240 10/02
B43501
Long Life – 85 °C
UR
Case
dimensions
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
385
68
100
22 × 25
22 × 30
980
670
1960
1330
1570
1070
1,3
1,7
0,61
0,79
B43501A3686M000
B43501A3107M000
100
150
25 × 25
22 × 40
670
450
1330
890
1070
720
1,8
2,4
0,80
1,1
B43501B3107M000
B43501A3157M000
150
220
25 × 30
25 × 40
450
310
890
610
720
490
2,3
3,1
1,0
1,4
B43501B3157M000
B43501A3227M000
220
330
470
30 × 30
30 × 40
35 × 40
310
210
150
610
410
290
490
330
240
3,1
4,1
5,5
1,4
1,9
2,5
B43501B3227M000
B43501A3337M000
B43501A3477M000
560
68
35 × 45
22 × 25
120
980
240
1960
200
1570
6,2
1,3
2,8
0,61
B43501A3567M000
B43501A9686M000
100
100
22 × 30
25 × 25
670
670
1330
1330
1070
1070
1,7
1,8
0,79
0,80
B43501A9107M000
B43501B9107M000
400
I~max
100 Hz
40 °C
A
Ordering code 2)
I~R1)
100 Hz
85 °C
A
CR
100 Hz
20 °C
VDC µF
120
22 × 35
560
1100
890
2,0
0,92
B43501A9127M000
150
22 × 40
450
890
720
2,4
1,1
B43501A9157M000
150
180
30 × 25
30 × 30
450
370
890
740
720
600
2,4
2,7
1,1
1,2
B43501B9157M000
B43501A9187M000
220
25 × 40
310
610
490
3,1
1,4
B43501A9227M000
220
30 × 35
310
610
490
3,2
1,5
B43501B9227M000
270
330
30 × 35
30 × 45
250
210
490
410
400
330
3,5
4,3
1,6
2,0
B43501A9277M000
B43501A9337M000
390
30 × 50
180
340
280
4,8
2,2
B43501A9397M000
470
35 × 45
150
290
240
5,7
2,6
B43501A9477M000
560
35 × 50
120
240
200
6,4
2,9
B43501A9567M000
Preferred types
1) 120 Hz conversion factor of ripple current: I~ (120 Hz) = 1,03 · I~ (100 Hz)
2) Ordering code for standard terminals (6,3 mm).
To determine the ordering code for short terminals (4,5 mm) and 3 terminals (4,5 mm) see page 238.
241 10/02
B43501
Long Life – 85 °C
CR
100 Hz
20 °C
VDC µF
Case
dimensions
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
I~max
100 Hz
40 °C
A
Ordering code 2)
I~R1)
100 Hz
85 °C
A
420
100
100
22 × 30
25 × 25
1330
1330
1990
1990
1600
1600
1,74
1,77
0,79
0,80
B43501A0107M000
B43501E0107M000
120
150
22 × 30
22 × 40
1110
890
1660
1330
1330
1070
2,06
2,37
0,94
1,08
B43501A0127M000
B43501A0157M000
150
180
25 × 35
25 × 35
890
740
1330
1110
1070
890
2,44
2,67
1,11
1,21
B43501E0157M000
B43501A0187M000
180
220
220
30 × 30
25 × 40
30 × 35
740
610
610
1110
910
910
890
730
730
2,76
3,11
3,22
1,26
1,41
1,46
B43501E0187M000
B43501A0227M000
B43501E0227M000
270
270
30 × 35
35 × 30
500
500
740
740
590
590
3,57
3,76
1,62
1,71
B43501A0277M000
B43501E0277M000
330
330
30 × 45
35 × 35
410
410
610
610
490
490
4,32
4,37
1,96
1,98
B43501A0337M000
B43501E0337M000
390
470
30 × 50
35 × 45
350
290
520
430
410
340
4,89
5,69
2,22
2,58
B43501A0397M000
B43501A0477M000
560
35 × 50
240
360
290
6,45
2,93
B43501A0567M000
47
22 × 25
2830
4240
3400
1,1
0,51
B43501A5476M000
68
68
22 × 30
25 × 25
1960
1960
2930
2930
2350
2350
1,4
1,5
0,65
0,66
B43501A5686M000
B43501B5686M000
100
100
22 × 40
25 × 30
1330
1330
1990
1990
1600
1600
1,9
1,9
0,88
0,86
B43501A5107M000
B43501B5107M000
100
30 × 25
1330
1990
1600
1,9
0,90
B43501C5107M000
150
25 × 40
890
1330
1070
2,6
1,2
B43501A5157M000
150
180
30 × 30
30 × 35
890
750
1330
1100
1070
890
2,5
2,9
1,1
1,3
B43501B5157M000
B43501A5187M000
220
270
30 × 40
30 × 45
610
500
910
740
730
600
3,4
3,9
1,5
1,8
B43501A5227M000
B43501A5277M000
330
470
35 × 40
35 × 50
410
290
610
430
490
350
4,6
5,9
2,1
2,7
B43501A5337M000
B43501A5477M000
UR
450
Preferred types
1) 120 Hz conversion factor of ripple current: I~ (120 Hz) = 1,03 · I~ (100 Hz)
2) Ordering code for standard terminals (6,3 mm).
To determine the ordering code for short terminals (4,5 mm) and 3 terminals (4,5 mm) see page 238.
242 10/02
B43501
Long Life – 85 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions 1)
KAL0541-H
2,5
Ι~
Ι ~R
B43501
2,0
1,5
0
40
50
60
70
10 000 h
25 000 h
50 000 h
100 000 h
250 000 h
0,5
175 000 h
1,0
80
˚C
90
TA
Frequency factor of
permissible ripple current I~
versus frequency f
Ι ~f
KAL0697-4
1,5
B43501
Ι ~100 Hz
1,3
1,2
1,1
1,0
0,9
0,8
5
10 2
5
10 3 Hz 2
f
1) Refer to page 40 for an explanation on how to interpret the useful life graphs.
243 10/02
B43501
Long Life – 85 °C
Frequency characteristics of ESR
Typical behavior
Impedance Z
versus frequency f
Typical behavior at 20 °C
KAL0698-C
2,5
B43501
ESR f
ESR 100 Hz
KAL0328-D
10 3
Ω
B43501
Z
10 2
2,0
4
47 µF/450 V
68 µF/400 V
330 µF/250 V
1500 µF/160 V
10 1
1,5
4
10 0
1,0
0,5
20 ˚C
4
> 60 ˚C
10
_1
4
0 1
10
5 10 2
5 10 3
Hz 10 4
f
10
_2
10 1
244 10/02
10 2
10 3
10 4
10 5 Hz 10 6
f
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages