Diodes AP1117E33G-U 1a low dropout positive adjustable or fixed-mode regulator Datasheet

AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
General Description
Features
•
•
•
•
•
•
•
•
•
1.4V Maximum Dropout at Full Load Current
Fast Transient Response
Output Current Limiting
Built-in Thermal Shutdown
Good Noise Rejection
3-Terminal Adjustable or Fixed 1.5V, 1.8V, 2.5V, 3.3V,
5.0V
SOT223-3L, TO252-3L, SOT89-3L, TO263-3L and
TO220-3L Packages
SOT223-3L and TO252-3L: Available in “Green”
Molding Compound (No Br, Sb)
Lead Free Finish/RoHS Compliant (Note 1)
AP1117 is a low dropout positive adjustable or fixed-mode
regulator with 1A output current capability. The product is voltage
specifically designed to provide well-regulated supply for low IC
applications such as high-speed bus termination and low current
3.3V logic supply. AP1117 is also well suited for other
applications such as VGA cards. AP1117 is guaranteed to have
lower than 1.4V dropout at full load current making it ideal to
provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 18V
input supply. AP1117 is available in both commercial and
industrial temperature grade.
Applications
•
•
PC Peripheral
Communication
Ordering Information
A P 1 1 1 7 X XX X X
Package
Vout
D : TO252-3L
E : SOT223-3L
K : TO263-3L
T : TO220-3L
Y : SOT89-3L
Note:
Blank: Adj
15: 1.5V
18: 1.8V
25: 2.5V
33: 3.3V
50: 5.0V
Packing
Lead Free
L : Lead Free
G : Green (Note 1)
- U : Tube
-13 : Taping
1. Green is only for SOT223-3L and TO252-3L.
2. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Lead-free
Lead-free
Device
Package
Code
Packaging
(Note 3)
AP1117D
AP1117E
AP1117K
AP1117T
AP1117Y
D
E
K
T
Y
TO252-3L
SOT223-3L
TO263-3L
TO220-3L
SOT89-3L
Tube
Part Number
Quantity
Suffix
80
75
50
50
NA
-U
-U
-U
-U
NA
13” Tape and Reel
Part Number
Quantity
Suffix
2500/Tape & Reel
2500/Tape & Reel
800/Tape & Reel
NA
2500/Tape & Reel
-13
-13
-13
NA
-13
Lead-free
Note:
3. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP1117 Rev. 6
1 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Pin Assignments
SOT223-3L
SOT89-3L
( Top View )
3
Vin
Vout
2
Vout
Adj (GND)
1
Adj (GND)
3
Vin
2
1
Tab is Vout
Tab is Vout
TO252-3L / TO263-3L
TO220-3L
( Top View )
FRONT VIEW
3
3
Vin
2
Vout
1
Adj (GND)
2
Tab is V out
1
Vin
Vout
Adj (GND)
Tab is Vout
Pin Descriptions
NAME
I/O
PIN #
Adj (GND)
I
1
A resistor divider from this pin to the Vout pin and ground sets the output voltage
(Ground only for Fixed-Mode).
Vout
O
2
The output of the regulator. A minimum of 10uF capacitor (0.15Ω ≤ ESR ≤ 20Ω)
must be connected from this pin to ground to insure stability.
3
The input pin of regulator. Typically a large storage capacitor (0.15Ω ≤ ESR ≤ 20Ω)
is connected from this pin to ground to insure that the input voltage does not sag
below the minimum dropout voltage during the load transient response. This pin
must always be 1.3V higher than Vout in order for the device to regulate properly.
Vin
AP1117 Rev. 6
I
FUNCTION
2 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Block Diagram
3
Vin
2
Vout
+
-
+
1.25V
+
CURRENT
LIMIT
1
GND
(FIXED)
+
1
-
Thermal
Shutdown
Adj
Absolute Maximum Ratings
Symbol
Parameter
Rating
Unit
Vin
DC Supply Voltage
-0.3 to 18
V
TOP
Operating Junction Temperature Range
(Commercial Grade)
0 to +125
oC
TMJ
Maximum Junction Temperature
150
oC
Power Dissipation
PD
TST
Note:
4.
SOT89-3L
SOT223-3L
TO220-3L
TO252-3L
TO263-3L
Internally limited by
maximum junction
temperature
of 150 oC (Note 4)
Storage Temperature
-65 to +150
mW
oC
AP1117 contains an internal thermal limiting circuit that is designed to protect the regulator in the event that the maximum junction temperature
exceeded. When activated, typically at 150°C, the regulator output switches off and then back on as the die cools.
AP1117 Rev. 6
3 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Electrical Characteristics
(Under Operating Conditions)
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT
1.225
1.250
1.275
V
1.470
1.500
1.530
V
1.764
1.800
1.836
V
2.450
2.500
2.550
V
3.235
3.300
3.365
V
4.900
5.000
5.100
V
0.2
%
1
%
18
15
mV
15
18
mV
20
25
mV
26
33
mV
40
50
mV
1.3
1.4
V
o
Reference Voltage
AP1117-ADJ
AP1117-1.5
AP1117-1.8
Output Voltage
AP1117-2.5
AP1117-3.3
AP1117-5.0
Line Regulation
AP1117-XXX
AP1117-ADJ
AP1117-1.5
AP1117-1.8
Load Regulation
AP1117-2.5
AP1117-3.3
AP1117-5.0
Dropout Voltage
(VIN-VOUT)
Current Limit
Minimum Load Current
(Note 7)
Thermal Regulation
Ripple Rejection
Temperature Stability
θ JA Thermal Resistance
Junction-to-Ambient
θ JC Thermal Resistance
Junction-to-Case
Notes:
AP1117-ADJ/1.5/1.8
/2.5/3.3/5.0
AP1117-ADJ/1.5/1.8
/2.5/3.3/5.0
AP1117-XXX
TA = 25 C, (VIN-OUT) = 1.5V
IO = 10mA
o
IOUT = 10mA, TA = 25 C,
3V≦VIN≦12V
o
IOUT = 10mA, TA = 25 C,
3.3V≦VIN≦12V
o
IOUT = 10mA, TA = 25 C,
4V≦VIN≦12V
o
IOUT = 10mA, TA = 25 C,
4.8V≦VIN≦12V
o
IOUT = 10mA, TA = 25 C,
6.5V≦VIN≦12V
IO = 10mA,VOUT+1.5V<VIN<12V,
o
TA = 25 C
VIN=3.3V,Vadj=0,0mA<Io<1A,
o
TA = 25 C (Note 5, 6)
VIN = 3V, 0mA<Io<1A,
o
TA = 25 C (Note 5, 6)
VIN = 3.3V, 0mA<Io<1A,
o
TA = 25 C (Note 5, 6)
VIN = 4V, 0mA<Io<1A,
o
TA = 25 C (Note 5, 6)
VIN = 5V, 0≦IOUT≦1A,
o
TA = 25 C (Note 5, 6)
VIN = 8V, 0≦IOUT≦1A,
o
TA = 25 C (Note 5, 6)
IOUT = 1A, ∆VOUT = 0.1%VOUT
(VIN-VOUT) = 5V
o
o
0 C≦Tj≦125 C
o
TA = 25 C, 30ms pulse
F = 180Hz, COUT = 25uF Tantalum, IOUT = 1A
AP1117-XXX
VIN = VOUT+3V
IO = 10mA
SOT223-3L: Control Circuitry/Power Transistor (Note 8)
TO252-3L: Control Circuitry/Power Transistor (Note 9)
SOT89-3L: Control Circuitry/Power Transistor (Note 10)
TO220-3L: Control Circuitry/Power Transistor (Note 11)
TO263-3L: Control Circuitry/Power Transistor (Note 12)
SOT223-3L: Control Circuitry/Power Transistor (Note 8)
TO252-3L: Control Circuitry/Power Transistor (Note 9)
SOT89-3L: Control Circuitry/Power Transistor (Note 10)
TO220-3L: Control Circuitry/Power Transistor (Note 11)
TO263-3L: Control Circuitry/Power Transistor (Note 12)
1. 1
A
5
10
mA
0.008
0.04
%/W
60
0.5
107
73
182
31.35
95
12
16
42
5.25
19
70
dB
%
O
C/W
O
C/W
5. See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant
junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package.
6. Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference
between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full
input/output range.
7. Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the
device is guaranteed to regulate if the output current is greater than 10mA.
8. Test condition for SOT223: Ta=27°C, no air flow, 2 oz copper, 5mmx5mm pad.
9. Test condition for TO252: Ta=27°C, no air flow, 2 oz copper, 5mmx5mm pad.
10. Test condition for SOT89-3L: no air flow, no heat sink.
11. Test condition for TO220-3L: with copper area of approximately 3in2, 1 oz, no air flow.
12. Test condition for TO263-3L: with copper area of approximately 2cmX2cm, 1 oz, no air flow.
AP1117 Rev. 6
4 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Typical Performance Characteristics
0.20
2. 0
Output Voltage Deviation (%)
1. 8
1. 6
Dropout Voltage (V)
1. 4
1. 2
0
I load=800mA
-0.20
Tj = 25 oC
1. 0
-0.40
0. 8
Tj = 125 oC
0. 6
-0.80
0. 4
0. 2
0
0
250
500
Output Current (mA)
750
-1
1000
-25
Dropout Voltage vs Output Current
0
25
50
Temperature (oC)
75
100
125
Load Regulation vs Temperature
2
1
0.8
1
0. 5
0
-0.5
-1
-1.5
-2
-50
-25
0
25
50
Temperature (oC)
75
100
125
150
Output Voltage Deviation (%)
Output Voltage Change (%)
1.5
0.6
0.4
0.2
0
2
4
7.5
Cin=1uF
Cout=10uF Tantalum
6.5
5.5
40
20
0
-20
-40
0
20
40
60
80
100 120 140 160 180 200
TIME (us)
30
8
10
12
C in = 1uF
C out = 10 uF Tantalum
Preload = 100mA
20
10
0
-10
-20
2
1
0
-1
Line Transient Response
AP1117 Rev. 6
6
Input Voltage (V)
Line Regulation
Load Current (A) Output Voltage Deviation (mV)
Output Voltage Deviation (mV) Input Voltage (V)
Percent Change in Output Voltage vs Temperature
0
10
20
30
40
50
TIME (us)
60
70
80
90
100
Load Transient Response
5 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Typical Application Circuit
5V
5V
C1
10uF
C1
10uF
Vin
Vin
Vout
C2
22uF
GND
Vo
Vout
3.3V/1A
R1
121 Ω
R2
121 Ω
Adj
Tab is Vout
2.5V/1A
C2
22uF
Tab is Vout
( 5V/3.3V fixed output )
( 5V/2.5V ADJ output )
Note: Vo = VREF ∗ (1+
R2
)
R1
Marking Information
(1) SOT223-3L
(Top view)
Logo
XXX
1 7-VV X
ID Code
Month: A~ L = 01~12
Year : "1 " = 2001
"2 " = 2002
~
Part Number
1117 for ADJ
17-VV:15 for 1.5V
18 for 1.8V
25 for 2.5V
33 for 3.3V
50 for 5.0V
L : Lead Free
G : Green
(2) TO252-3L
(Top view)
Logo
AP1117 Rev. 6
17-VV
YY WW X X
L : Lead Free
G : Green
Internal Code
Xth Week: 01~52
Year: "01" = 2001
"02" = 2002
~
Part Number
1117 for ADJ
17-VV:15 for 1.5V
18 for 1.8V
25 for 2.5V
33 for 3.3V
50 for 5.0V
6 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Marking Information
(Continued)
(3) SOT89-3L
( Top View )
XX
Y M X
1
2
3
XX :
X :
Y :
M :
Identification code
L : Lead Free
Year : 0-9
Month: A~L
Marking Code Table
Identification Code
Output Version
DA
AP1117-ADJ
DB
AP1117-1.5V
DC
AP1117-1.8V
DD
AP1117-2.5V
DE
AP1117-3.3V
DF
AP1117-5.0V
(4) TO263-3L
( Top view )
AP1117 Rev. 6
1117-VV
YY WW X X
L : Lead Free
Internal code
Xth week: 01~52
Year: "01" = 2001
"02" = 2002
~
Logo
Part Number
VV: 15 for 1.5V
18 for 1.8V
25 for 2.5V
33 for 3.3V
50 for 5.0V
Blank for ADJ
7 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Marking Information
(Continued)
(5) TO220-3L
(Top view)
Logo
Part Number
1117 for ADJ
17-VV : 15 for 1.5V
18 for 1.8V
25 for 2.5V
33 for 3.3V
50 for 5.0V
L : Lead Free
17 - VV
X X WW X X
ID Code
Xth Week: 01~ 52
Year: "01 " = 2001
"02 " = 2002
~
Package Information
(All Dimensions in mm)
(1) SOT223-3L
6.30/6.70 Nom 6.50
2.90 3.15 Ref.
1.6
3.30/3.70
Nom 3.50
1.50/2.00
Nom 2.00
2.3
1.2
Land Pattern Recommendation (Unit: mm)
0.60/0.70
Nom 0.80
0°/10°
Nom 5°
13°
8 of 11
www.diodes.com
1.50/
1.80
Nom
1.65
0.010/0.15
Nom 0.05
2.3 Basic
4.6 Basic
13°
AP1117 Rev. 6
6.4
6.70/7.30
Nom 7.00
1.6
3.3
0.91/1.10
Nom 1.00
0.28/0.32
Seating Plane Nom 0.30
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Package Information
(Continued) (All Dimensions in mm)
0.88/1.27
(2) TO252-3L
6.354/6.80 Typ 6.58
7.2
11.0
5.40/6.20
Typ 5.57
5.6
5.20/5.50 Typ 5.35
5.6
2.0
2.25
1.2
Land Pattern Recommendation (Unit: mm)
0.64/1.02
Typ 0.83
0.89/
1.14
0.45/0.58
Typ 0.52
2.18/2.40
Typ 2.29
9.00/10.40 Typ 9.70
0.51
SEE NOTE2
2.28
BSC.
4.57 BSC.
0.61 Typ
SEATING
PLANE
0.45/0.58
Typ 0.52
(3) SOT89-3L
1.40/1.75
Typ 1.60
2.7
3.94/4.25
1.45/1.55
Typ 1.50
1.3
1.9
0.4
0.80/
1.20
2.35/2.60 Typ 2.48
1.7
1.5
0.9
Land Pattern Recommendation (Unit: mm)
2.90/3.10
Typ 3.00
50 (2x)
80 (2x)
1.40/1.60
Typ 1.50
4.40/4.60 Typ 4.50
0.36/0.48 0.41/0.53 0.36/0.48
Typ 0.42 Typ 0.47 Typ 0.42
AP1117 Rev. 6
0.35/0.43
Typ 0.39
9 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Package Information
(Continued) (All Dimensions in mm)
2.92
Typ 1.30
(4) TO263-3L
1.27/
1.78
Typ
1.52
3
15.7
9.1
8.65/9.65 Typ 9.15
10.9
14.61/15.88 Typ 15.24
9.65/10.29 Typ 9.97
2.54
BSC.
1.3
0.51/0.99 Typ 0.75
Land Pattern Recom m endation (Unit: m m )
0.38 Typ
4.06/4.83
Typ 4.45
1.14/1.40 Typ1.27
2.54
1.14/1.40
Typ 1.27
2.28/2.80 Typ 2.54
(5) TO220-3L
Ø3.53/4.09
Typ 3.81
3.55/4.85
Typ 4.20
0.51/1.40
Typ 0.95
SEATING PLANE
9.70/10.70
Typ 10.20
5.84/6.86
Typ 6.35
14.20/16.50
Typ 15.35
2.54/3.43
Typ 2.98
1.14/1.78
Typ 1.46
4.83/5.33
Typ 5.08
AP1117 Rev. 6
12.72/14.72
Typ 13.72
3.66/6.35
Typ 5.00
0.31/1.14
0.51/1.14 Typ 0. 72
Typ 0.83
2.99/2.79
Typ 2.54
10 of 11
www.diodes.com
2.03/2.92
Typ2.48
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
AP1117 Rev. 6
11 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
Similar pages