Vishay MCL101A-TR Small signal schottky barrier diode Datasheet

MCL101A–MCL101C
Vishay Semiconductors
Small Signal Schottky Barrier Diodes
Features
D Integrated protection ring against
static discharge
D Low capacitance
D Low leakage current
D Low forward voltage drop
Applications
96 12315
HF–Detector
Protection circuit
Diode for low currents with a low supply voltage
Small battery charger
Power supplies
DC / DC converter for notebooks
Order Instruction
Type
MCL101A
MCL101B
MCL101C
Type Differentiation
VR=60 V, VF@IF1mA max. 0.41 V
VR=50 V, VF@IF1mA max. 0.4 V
VR=40 V, VF@IF1mA max. 0.39 V
Ordering Code
MCL101A–TR
MCL101B–TR
MCL101C–TR
Remarks
Tape and Reel
Absolute Maximum Ratings
Tj = 25_C
Parameter
Test Conditions
Reverse voltage
g
Peak forward surge current
Repetitive peak forward current
Forward current
Junction temperature
Storage temperature range
tp=10ms
Type
MCL101A
MCL101B
MCL101C
Symbol
VR
VR
VR
IFSM
IFRM
IF
Tj
Tstg
Value
60
50
40
2
150
30
125
–65...+150
Unit
V
V
V
A
mA
mA
°C
°C
Maximum Thermal Resistance
Tj = 25_C
Parameter
Junction ambient
Document Number 85627
Rev. 3, 25-Jun-01
Test Conditions
on PC board 50 mmx50 mmx1.6 mm
Symbol
RthJA
Value
320
Unit
K/W
www.vishay.com
1 (4)
MCL101A–MCL101C
Vishay Semiconductors
Electrical Characteristics
Tj = 25_C
Parameter
Test Conditions
Reverse Breakdown Voltage
g
IR=10mA
Leakage
g current
VR= 50 V
VR= 40 V
VR= 30 V
IF=1mA
Forward voltage drop
IF=15mA
Diode capacitance
VR= 0 V, f= 1MHz
Type
MCL101A
MCL101B
MCL101C
MCL101A
MCL101B
MCL101C
MCL101A
MCL101B
MCL101C
MCL101A
MCL101B
MCL101C
MCL101A
MCL101B
MCL101C
Symbol
V(BR)R
Min
60
50
40
Typ
Max
200
200
200
0.41
0.4
0.39
1
0.95
0.9
2.0
2.1
2.2
IR
VF
VF
CD
Unit
V
V
V
nA
nA
nA
V
V
V
V
V
V
pF
pF
pF
Characteristics (Tj = 25_C unless otherwise specified)
100.00
2.0
10.00
Tj=100°C
Tj=75°C
1.00
Tj=50°C
0.10
I
Tj=25°C
Tj=25°C
1.8
C D– Diode Capacitance ( pF )
Tj=125°C
R–
Reverse Current ( µ A)
Tj=150°C
0.01
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5
16204
10 15 20 25 30 35 40 45 50
VR – Reverse Voltage ( V )
Figure 1. Reverse Current vs. Reverse Voltage
www.vishay.com
2 (4)
0
16205
5
10 15 20 25 30 35 40 45 50
VR – Reverse Voltage ( V )
Figure 2. Diode Capacitance vs. Reverse Voltage
Document Number 85627
Rev. 3, 25-Jun-01
MCL101A–MCL101C
Vishay Semiconductors
Wave Soldering
10.00
Forward Current ( mA )
16774
1.4
1.00
0.9
F–
0.10
1.0
0.9
I
2.8
Recommended foot pads (in mm)
0.01
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
VF – Forward Voltage ( V )
16206
Figure 3. Forward Current vs. Forward Voltage
Reflow Soldering
16773
1.2
0.8
0.8
0.8
2.4
Recommended foot pads (in mm)
Dimensions in mm
96 12072
Document Number 85627
Rev. 3, 25-Jun-01
www.vishay.com
3 (4)
MCL101A–MCL101C
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems with respect to their impact on the health and safety of our employees and the public, as well as their
impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as
ozone depleting substances ( ODSs ).
The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and
forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban
on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of
ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively
2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency ( EPA ) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer application
by the customer. Should the buyer use Vishay-Semiconductors products for any unintended or unauthorized application, the
buyer shall indemnify Vishay-Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or
indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423
www.vishay.com
4 (4)
Document Number 85627
Rev. 3, 25-Jun-01
Similar pages