LASER DIODE NX8563LF 1 550 nm InGaAsP MQW-DFB LASER DIODE MODULE CW LIGHT SOURCE FOR DWDM APPLICATIONS DESCRIPTION The NX8563LF is a 1 550 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode module with Polarization Maintain Fiber (PMF). It is designed as Continuous Wave (CW) light source and ideal for optical transmission systems with external modulators. The device is available for Dense Wavelength Division Multiplexing (DWDM) wavelengths based on ITUT recommendations, enabling a wide range of applications. FEATURES • Output power Pf = 10 mW MIN. • Available for DWDM wavelengths based on ITU-T recommendations (100 GHz grid, please refer to the ORDERING INFORMATION) • Internal thermo-electric cooler and isolator • Hermetically sealed 14-pin butterfly package • Polarization maintain fiber pigtail Document No. PL10215EJ03V0DS (3rd edition) Date Published September 2005 CP(K) The mark shows major revised points. NX8563LF PACKAGE DIMENSIONS (UNIT: mm) 15.24 2.54 TOP VIEW 8.89±0.13 10 MIN. 1.25 4– φ 2.67 #7 8 14 + – Cooler PD 12.7±0.2 6.0 1 0.9 7 LD 20.83±0.25 Function Pin No. 5.15 0.3 1.0 Optical Fiber (PMF) Length: 1 000 MIN. 7.8±0.2 5.4 Thermistor R #14 PIN CONNECTIONS 26.04±0.25 29.97±0.25 L #8 0.5 2 #1 20.8 1 2 3 4 5 6 7 Thermistor Thermistor LD Cathode PD Anode PD Cathode Cooler Anode Cooler Cathode Data Sheet PL10215EJ03V0DS Pin No. 8 9 10 11 12 13 14 Function GND GND NC LD Anode LD Cathode LD Anode NC NX8563LF OPTICAL FIBER DIMENSIONS (UNIT: mm) Parameter Outer Diameter Minimum Fiber Bending Radius Fiber Length Specification Unit 0.9±0.1 mm 30 mm 1 000 MIN. mm PMF FC-PC Connector Fiber Length: 1 000 mm MIN. Data Sheet PL10215EJ03V0DS 3 NX8563LF ORDERING INFORMATION NX8563LF -BA With FC-PC Connector Wavelength Code : Refer to Table A Table A: DWDM wavelength based on ITU-T recommendations (@TLD = Tset) (1/2) Wavelength Code *1 ITU-T Wavelength Frequency (nm) (THz) 279 1 527.99 196.20 287 1 528.77 295 Wavelength Code Frequency (nm) (THz) 485 1 548.51 193.60 196.10 493 1 549.31 193.50 1 529.55 196.00 501 1 550.11 193.40 303 1 530.33 195.90 509 1 550.91 193.30 311 1 531.11 195.80 517 1 551.72 193.20 318 1 531.89 195.70 525 1 552.52 193.10 326 1 532.68 195.60 533 1 553.32 193.00 334 1 533.46 195.50 541 1 554.13 192.90 342 1 534.25 195.40 549 1 554.94 192.80 350 1 535.03 195.30 557 1 555.74 192.70 358 1 535.82 195.20 565 1 556.55 192.60 366 1 536.60 195.10 573 1 557.36 192.50 373 1 537.39 195.00 581 1 558.17 192.40 381 1 538.18 194.90 589 1 558.98 192.30 389 1 538.97 194.80 597 1 559.79 192.20 397 1 539.76 194.70 606 1 560.60 192.10 405 1 540.55 194.60 614 1 561.41 192.00 413 1 541.34 194.50 622 1 562.23 191.90 421 1 542.14 194.40 630 1 563.04 191.80 429 1 542.93 194.30 638 1 563.86 191.70 437 1 543.73 194.20 646 1 564.67 191.60 445 1 544.52 194.10 654 1 565.49 191.50 453 1 545.32 194.00 663 1 566.31 191.40 461 1 546.11 193.90 671 1 567.13 191.30 469 1 546.91 193.80 679 1 567.95 191.20 477 1 547.71 193.70 687 1 568.77 191.10 *1 The value which omitted and computed the 3rd place below the decimal point 4 *1 ITU-T Wavelength Data Sheet PL10215EJ03V0DS NX8563LF Table A: DWDM wavelength based on ITU-T recommendations (@TLD = Tset) (2/2) Wavelength Code *1 ITU-T Wavelength Frequency (nm) (THz) 695 1 569.59 191.00 704 1 570.41 712 Wavelength Code *1 ITU-T Wavelength Frequency (nm) (THz) 912 1 591.25 188.40 190.90 921 1 592.10 188.30 1 571.23 190.80 929 1 592.94 188.20 720 1 572.06 190.70 937 1 593.79 188.10 728 1 572.88 190.60 946 1 594.64 188.00 737 1 573.71 190.50 954 1 595.48 187.90 745 1 574.54 190.40 963 1 596.33 187.80 753 1 575.36 190.30 971 1 597.18 187.70 761 1 576.19 190.20 980 1 598.04 187.60 770 1 577.02 190.10 988 1 598.89 187.50 778 1 577.85 190.00 997 1 599.74 187.40 786 1 578.68 189.90 6006 1 600.60 187.30 795 1 579.51 189.80 6014 1 601.45 187.20 803 1 580.35 189.70 6023 1 602.31 187.10 811 1 581.18 189.60 6031 1 603.16 187.00 820 1 582.01 189.50 6040 1 604.02 186.90 828 1 582.85 189.40 6048 1 604.88 186.80 836 1 583.69 189.30 6057 1 605.74 186.70 845 1 584.52 189.20 6066 1 606.60 186.60 853 1 585.36 189.10 6074 1 607.46 186.50 862 1 586.20 189.00 6083 1 608.32 186.40 870 1 587.04 188.90 6091 1 609.19 186.30 878 1 587.88 188.80 6100 1 610.05 186.20 887 1 588.72 188.70 6109 1 610.92 186.10 895 1 589.56 188.60 6117 1 611.78 186.00 904 1 590.41 188.50 *1 The value which omitted and computed the 3rd place below the decimal point Data Sheet PL10215EJ03V0DS 5 NX8563LF ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit Forward Current of LD IF 300 mA Reverse Voltage of LD VR 2.0 V Forward Current of PD IF 10 mA Reverse Voltage of PD VR 20 V Operating Case Temperature TC −20 to +70 °C Storage Temperature Tstg −40 to +85 °C Lead Soldering Temperature Tsld 260 (10 sec.) °C ELECTRO-OPTICAL CHARACTERISTICS (TLD = Tset, TC = −20 to +70°C) Parameter Symbol Conditions MIN. TYP. Unit 35 °C Laser Set Temperature Tset Forward Voltage VF Pf = 10 mW 1.2 2.5 V Forward Current IF Pf = 10 mW 70 125 mA Threshold Current Ith 20 40 mA Optical Output Power from Fiber Pf IF = 125 mA, TLD = Tset Peak Emission Wavelength λp Pf = 10 mW, CW, TLD = Tset Spectral Line Width ∆ν Pf = 10 mW, CW, 3 dB down Side Mode Suppression Ratio Relative Intensity Noise Polarization Extinction Ratio *2 SMSR 20 MAX. Pf = 10 mW, CW RIN Pf = 10 mW, 20 MHz to 3 GHz ext Pf = 10 mW, CW *1 Available for DWDM wavelengths based on ITU-T recommendations (100 GHz grid, please refer to the ORDERING INFORMATION) *2 Polarization state of LD is aligned parallel to the slow axis. 6 Data Sheet PL10215EJ03V0DS 10 1 527.99 mW ITU-T 1 33 *1 1 611.78 nm 2 MHz 45 dB −150 20 dB/Hz dB NX8563LF ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = Tset, TC = −20 to +70°C) Parameter Symbol Conditions MIN. TYP. Unit 2 000 µA Monitor Current Im Pf = 10 mW, VR = 5 V Dark Current ID VR = 5 V 10 nA Tracking Error γ Im = const. 0.5 dB *1 100 MAX. Pf *1 γ = 10 log 10 mW Pf (mW) TLD = Tset, TC = 25˚C 10 TLD = Tset, TC = –20 to +70˚C Pf 0 Im (@ Pf (25˚C) = 10 mW) Im ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = Tset, TC = −20 to +70°C) Parameter Symbol Conditions TLD = 25°C MIN. TYP. MAX. Unit 9.5 10.0 10.5 kΩ 3 350 3 450 3 550 K Thermistor Resistance R B Constant B Cooler Current IC ∆T = 70 − Tset, Pf = 10 mW 1.0 A Cooler Voltage VC ∆T = 70 − Tset, Pf = 10 mW 2.0 V Data Sheet PL10215EJ03V0DS 7 NX8563LF TYPICAL CHARACTERISTICS (TLD = Tset, unless otherwise specified) OPTICAL OUTPUT POWER FROM FIBER vs. FORWARD CURRENT Optical Output Power from Fiber Pf (mW) SPECTRUM 10 Relative Intensity (dB) 0 –10 –20 –30 –40 –50 –60 –70 1 540 1 550 10.0 7.5 5.0 2.5 80 100 OPTICAL OUTPUT POWER FROM FIBER vs. MONITOR CURRENT 80 60 40 0.4 0.8 1.2 1.6 2.0 2.4 12.0 10.0 8.0 6.0 4.0 2.0 0 THERMISTOR RESISTANCE vs. AMBIENT TEMPERATURE 50 30 20 10 5 3 2 25 50 0.2 0.4 0.6 Monitor Current Im (mA) Forward Voltage VF (V) Thermistor Resistance R (kΩ) 60 FORWARD CURRENT vs. FORWARD VOLTAGE 20 75 Ambient Temperature TA (°C) Remark The graphs indicate nominal characteristics. 8 40 Forward Current IF (mA) 100 1 0 20 Wavelength λ (nm) Optical Output Power from Fiber Pf (mW) Forward Current IF (mA) 12.5 0 1 560 120 0 15.0 Data Sheet PL10215EJ03V0DS 0.8 1.0 NX8563LF REFERENCE Document Name Document No. OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE PL10161E Opto-Electronics Devices Pamphlet PX10160E Data Sheet PL10215EJ03V0DS 9 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.