Strain Reliefs MS27291 Strain Relief MS27291-401 Glenair Connector Designator E INACTIVE FOR NEW DESIGN OR MODIFICATION OF EXISTING EQUIPMENT Basic Part No. MIL-DTL-26500 Dash No. E A Thread C G G F TABLE I Dash No. For Use With Class Connectors R and F G 1 101 2 201 3 301 4 401 5 501 6 601 13 701 14 801 15 901 Shell Size Ref. 10 12 14 16 18 22 8 20 24 A Thread Class 2B .562 - 24 UNEF .750 - 20 UNEF .812 - 20 UNEF .938 - 20 UNEF 1.062 - 18 UNEF 1.312 - 18 UNEF .438 - 28 UNEF 1.188 - 18 UNEF 1.438 - 18 UNEF C Max .731 (18.6) .919 (23.3) .981 (24.9) 1.106 (28.1) 1.231 (31.3) 1.481 (37.6) .606 (15.4) 1.356 (34.4) 1.606 (40.8) E ±.015 .935 .935 1.170 1.170 1.170 1.170 .935 1.170 1.170 (.4) (23.7) (23.7) (29.7) (29.7) (29.7) (29.7) (23.7) (29.7) (29.7) G Dia F Max ±.005 (.1) .914 (23.2) .270 (6.9) 1.026 (26.1) .400 (10.2) 1.090 (27.7) .460 (11.7) 1.250 (31.8) .610 (15.5) 1.358 (34.5) .690 (17.5) 1.604 (40.7) .940 (23.9) .789 (20.0) .186 (4.7) 1.481 (37.6) .816 (20.7) 1.729 (43.9) 1.066 (27.1) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Finish: Anodize. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 62-2