tSs-mi-donduckoi ^Pioaucta, One. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 D40C Series 30-50 VOLTS .5 AMP, 6.25 WATTS Designed for driver, regulator, touch switch, I.C. driver, audio output, relay substitute, oscillator, servo-amplifier, and capacitor multiplier applications. NFN COLLECTOR Features: • hFE Min. — 10,000 and 40,000 CASE STYLE TO-202 • 1.33 Watt power dissipation at TA = 25° DIMENSIONS ARE IN INCHES AND (MILLIMETER*) 0.360-0.410 TYPE TERM. 1 TERM 2 TE«M. 3 TAB TO-202 EMIT^E* BASE COLLECTOR COLLECTOR maximum ratings (TA = 25° C) (unless otherwise specified) RATING Collector-Emitter Voltage Collector-Emitter Voltage Emitter Base Voltage Collector Current — Continuous Peak'1> Base Current — Continuous Total Power Dissipation @ T^ = 25° C @T C = 25°C Operating and Storage Junction Temperature Range SYMBOL D40C1 VCEO VCES VEBO 30 13 .5 1.0 0.1 1.33 6.25 D40C4 40 40 13 .5 1.0 0.1 1.33 6.25 040C7 50 50 13 .5 1.0 0.1 1.33 6.25 UNITS Volts Volts Volts TJ, TSTG -55 to +150 -5510+150 -55to+150 °C R0JA RffJC 75 20 75 20 75 20 "C/W °C/W TL 260 260 260 °C 'CM IB PD 30 A A Watts thermal characteristics Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Maximum Lead Temperature tor Soldering Purposes: W from Case for 5 Seconds (1) Pulse Test: Pulse Width = 300ms. Duty Cycle < 2%. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished b> NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Qurtllh/ electrical Characteristics (Tc= 25° C) (unless otherwise specified) CHARACTERISTIC SYMBOL WIN TYP MAX UNIT off characteristics11* Collector-Emitter Voltage (lc = 10mA) D40C1 D40C4 D40C7 VCEO 30 40 50 — — Collector Cut-off Current (VCE = Rated VCES) (Tc = 25° C) (Tc = 1 50° C) ICES ICBO — — 0.5 20 IEBO — — 0.1 Emitter Cutoff Current (V E B=13V) Volts "A *A second breakdown FBSOA | Second Breakdown with Base Forward Biased SEE FIGURE 2 on characteristics DC Current Gain (lc = 200mA, VCE = 5V) r»FE Collector-Emitter Saturation Voltage (lc = 500mA, IB = 0.5mA) Base-Emitter Saturation Voltage (lc = 500mA, IB = 0.5mA) 10K — 60K VCE(sat) — — 1.5 V vBE(sat) — — 2.0 Volts CCBO — — 220 pF h — 75 — MHz ns dynamic characteristics Collector Capacitance (VCE = 10V, f =1MHz) Current Gain - Bandwidth Product (IC = 20mA, VCE = 5V) switching characteristics Resistive Load Delay Time + Rise Time lc = 1A, IBI = iB2 = 1mA Storage Time VCG = 30V, tp = 25 Msec Fall Time td + tr — 100 — t. — 350 — tf — 800 — (1) Pulse Test: PW < 300ms Duty Cycle < 2%. IOOK 80K 6 OK 20K I OK 8K 6K PULSED MEASUREMENT PULSE WIOTH • 2 MILLISEC DUTY CYCLE S 2 % c£ -5 VOLTS IK 800 £00 040CI.4. ANO 7 ° 200 2 4 6 K> 20 4 6O :00 IOC 800 8d 200 ^OOIOOO IC-COLLECTOR CURRENT-MILLIAMPERES 6 40 6 * tO 20 «0 60 80 100 VCE-COLLECTOR-TO-EMITTER VOLTAGE-VOLTS FIG. 2 SAFE REGION OF OPERATION FIG 1. TYPICAL hpE vs. lc 372