Illumination LUXEON N Industry best thermal performance, 2A drive current, compatible with standard optics, 3-stripe footprint LUXEON N is a high power LED in a 2.5mm x 2.5mm thermally optimized package that supports the highest drive current—up to 2A. This high current capability enables twice the flux in half the size compared to standard 3535 packages while achieving high efficacy. In addition to superior performance delivered over the widest operating range, LUXEON N is compatible with industry standard off-the-shelf optics, minimizing design efforts and costs. The thermally optimized package achieves the lowest thermal resistance at 2°C/W for high drive current system performance. These advantages provide total system design flexibility, making LUXEON N the ideal high power emitter choice for the next generation design of outdoor light sources. Features and BENEFITS Primary Applications Thermally optimized package provides the lowest Rth at 2°C/W Architectural Highest drive current of 2A allows 670 lm+ per LED High Bay & Low Bay Low Vf achieves high efficacy of 161 lm/W at 350mA and 110 lm/W at 2000mA Outdoor Radiation pattern compatible with standard 3535 high power packages and LUXEON TX 2525 package has half the footprint compared to standard 3535 ensuring fit under off-the-shelf optics LM-80 data available at launch DS161 LUXEON N Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. –– Streetlights Specialty Lighting –– Torch No. E352519 Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON N LEDs are tested and binned with a DC drive current of 700mA at a junction temperature, Tj, of 85°C. Part Number Nomenclature Part numbers for LUXEON N follow the convention below: L 1 N 0 – A A 7 0 0 0 0 0 0 B B B 0 Where: A A – designates nominal ANSI CCT (30=3000K, 40=4000K, 50=5000K, 57=5700K, 65=6500K) B B B – designates minimum luminous flux level at test conditions (see Product Bin and Labeling section) Therefore, the following part number is used for a LUXEON N 3000K 70CRI with a minimum luminous flux of 290 lumens: L 1 N 0 – 3 0 7 0 0 0 0 0 0 2 9 0 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON N is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON N at 700mA and 2000mA, Tj=85°C. Typical Luminous Efficacy (lm/W) Typical Luminous Efficacy (lm/W) Typical Luminous Flux (lm) 265 135 614 105 L1N0-3070000000000 280 290 148 671 113 L1N0-4070000000000 70 280 290 148 671 113 L1N0-5070000000000 70 280 290 148 671 113 L1N0-5770000000000 70 280 290 148 671 113 L1N0-6570000000000 Luminous Flux [1] (lm) Nominal CCT Minimum CRI [1, 2] Minimum 3000K 70 250 4000K 70 5000K 5700K 6500K Typical 700mA Part Number 2000mA Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. Optical Characteristics Table 2. Optical characteristics for LUXEON N at 700mA, Tj=85°C. Part Number Typical Total Included Angle [1] Typical Viewing Angle [2] L1N0-xx7000000xxx0 160° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON N at 700mA, Tj=85°C. Part Number L1N0-xx7000000xxx0 Forward Voltage [1] (Vf) Minimum Typical MAXIMUM Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) 2.5 2.8 3.0 -1.6° Typical Thermal Resistance—Junction to Solder Pad (°C/W) 2.0° Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 85°C. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 3 Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON N. Parameter Maximum Performance DC Forward Current [1, 2] Peak Pulsed Forward Current [1, 3] LED Junction Temperature [1] (DC & Pulse) 1050mA 1225mA 2000mA 1200mA 1750mA 2500mA 150°C 135°C 100°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature [1] -40°C to 135°C LED Storage Temperature -40°C to 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) [4] LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. 4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse voltage does not exceed 5V and the reverse current is less than 220uA. Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for LUXEON N at 700mA, Tj=85°C. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 4 Light Output Characteristics Figure 2. Typical normalized light output vs. junction temperature for LUXEON N at 700mA. Figure 3. Typical normalized light output vs. forward current for LUXEON N at Tj=85°C. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 5 Forward Current Characteristics Figure 4. Typical forward current vs. forward voltage for LUXEON N at Tj=85°C. Radiation Pattern Characteristics Figure 5. Typical radiation pattern for LUXEON N at 700mA, Tj=85°C. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 6 Figure 6. Typical polar radiation pattern for LUXEON N at 700mA, Tj=85°C. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 7 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON N LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: Where: A B C D A – designates luminous flux bin (example: U=280 to 290 lumens, V=290 to 300 lumens) B – designates correlated color temperature (CCT) bin (1=6500K, 2=5700K, 3=5000K, 5=4000K, 7=3000K) C – designates SDCM bin (example: 5=5-step MacAdam ellipse) D – designates forward voltage bin (example: X=2.65 to 2.85V, Y=2.85 to 3.00V) Therefore, a LUXEON N with a lumen range of 290 to 300, SDCM bin of 5, CCT bin of 4000K and a forward voltage range of 2.65 to 2.85V has the following CAT code: V 5 5 X Luminous Flux Bins Table 5 lists the standard luminous flux bins for LUXEON N emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON N, Tj=85°C. Bin Luminous Flux [1] (lm) Minimum Maximum Q 240 250 R 250 260 S 260 270 T 270 280 U 280 290 V 290 300 W 300 310 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 8 Color Bin Definition 0.430 NOTE: Color bin space illustration for 3000K. For CCT above 4000K, the ellipse centers are all above BBL line. 0.425 0.420 Bin 5A CIE 1931 y 0.415 Bin 5D 0.410 Bin 5B 0.405 Bin 5C 0.400 0.395 0.390 0.445 0.450 0.455 0.460 0.465 0.470 0.475 CIE 1931 x Figure 7. Color space definition for LUXEON N. Figure 8. 5-step MacAdam ellipse illustration for Table 6. Table 6. 5-step MacAdam ellipse color bin definitions for LUXEON N. Nominal CCT Color Space Center Point [1] (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle, θ 3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.2° 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.7° 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.6° 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.1° 6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.6° Notes for Table 6: 1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE 1931 color space. Table 7. MacAdam ellipse color bin definitions for LUXEON N. Bin SDCM 5A 5-step MacAdam ellipse 5B 5-step MacAdam ellipse 5C 5-step MacAdam ellipse 5D 5-step MacAdam ellipse Forward Voltage Bins Table 8. Forward voltage bin definitions for LUXEON N, Tj=85°C. Bin Forward Voltage [1] (Vf) Minimum Maximum X 2.65 2.85 Y 2.85 3.00 Notes for Table 8: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 9 Mechanical Dimensions Figure 9. Mechanical dimensions for LUXEON N. Notes for Figure 9: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 10 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 9. Table 9. Reflow profile characteristics for LUXEON N. PROFILE FEATURE Lead-Free Assembly Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 180 seconds Ramp-Up Rate (TL to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 10. Moisture sensitivity levels for LUXEON N. level 1 Floor Life Soak Requirements Standard TIme Conditions Time Conditions Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 11 Solder Pad Design Figure 11. Recommended PCB solder pad layout for LUXEON N. Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Packaging Information Pocket Tape Dimensions B A A B Cross section view A-A and B-B in this drawing are not drawn to scale in order to depict the details clearly Figure 12. Pocket tape dimensions for LUXEON N. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 12 Reel Dimensions Figure 13. Reel dimensions for LUXEON N. Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS161 LUXEON N Product Datasheet 20170129 ©2017 Lumileds Holding B.V. All rights reserved. 13 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS161 LUXEON N Product Datasheet 20170129 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.