Estek ICL7106 True differential input and reference, direct display Datasheet

ICL7106/7107
Description
The ICL7106 and ICL7107 are high performance,low power 3 1 / 2 digit A/D converters. Included are seven
segment decoders, display drivers, a reference, and a clock. The ICL7106 is designed to interface with a
liquid crystal display (LCD) and includes a multiplexed backplane drive, the ICL7107 will directly drive an
instrument size light emitting diode (LED) display. The ICL7106 and ICL7107 bring together a combination of
high accuracy, versatility, and true economy. True differential inputs and reference are useful in all systems, but
give the designer an uncommon advantage when measuring load cells, strain gauges and other bridge type
transducers. Finally he true economy of single power Supply operation ( ICL7106 ),
enables a high performance panel meter to be built with the addition of only 10 passive
display.
Components and
a
ICL7106, ICL7107
TOP VIEW
Features
V+
D1
1
40 OSC 1
2
39 OSC 2
• Guaranteed Zero Reading for 0V input on All Scales
C1
3
38 OSC 3
• True Polarity at Zero for Precise Null Detection
B1
4
A1
5
37 TEST
36 REF HI
(1’
s)
• True Differential input and Reference, Direct Display
• Drive
- LCD ICL7106
- LED ICL7107
F1
6
G1
7
E1
8
35 REF LO
34 CREF+
CREF33 COMMON
32 IN HI
D2
9
C2
10
B2
11
A2
12
• Low Power DissipationTypically Less Than 10mW
F2
13
• No Additional Active Circuits Required
E2
14
D3
15
27 Vs)
26 G2 (10’
• Low Noise-Less Than 15 uVp-p
(10’
s)
• On Chip Clock and Reference
• New Small Outline Surface Mount Package Available
31 IN LO
30 A-Z
29 BUFF
28 INT
B3
16
25 C3
-F3
17
24 A3
E3
18
23
(1000) AB4
19
22 G3
POL
20
21 BP/GND
(100’
s)
(MINUS)
Absolute Maximum Ratings
Supply Voltage
ICL7106, V+ to V-.......................................................15V
ICL7107, V+ to GND...................................................6V
ICL7107, V- to GND....................................................-9V
Analog input Voltage (Either input) (Note 1)..................V+ to VReference input Voltage (Either input)...........................V+ to VClock input
ICL7106......................................................TEST to V+
ICL7107.......................................................GND to V+
BEIJING ESTEK ELECTRONICS CO.,LTD
1
ICL7106/7107
Electrical Characteristics
Parameters
Test conditions
Min
VIN = 0.0V,
Full-Scale =
200mV
VIN = V REF
, V REF= 100mV
-V IN = +V IN
200mV
Difference in Reading for Equal
Positive and Negative inputs Near
Full-Scale
Full-Scale = 200mV or
Full-Scale =
2V Maximum
Deviation from Best Straight Line
Fit (Note 5)
-000.0
Typ
Max
Unit
SYSTEMS PEREFORMANCE
Zero input Reading
Ratiometric Reading
Rollover Error
Linearity
Common Mode rejection Ratio
VCM = 1V, V IN = 0V,
200mV (Note 5)
End Power Supply Character
V+ Supply Current
VIN = 0 (Does Not include LED
Current for ICL7107)
ICL7107 Only
End Power Supply Character VSupply Current
COMMON Pin Analog Common
Voltage
DISPLAY DRIVER ICL7106
ONLY
Pk-Pk Segment Drive Voltage
Pk-Pk Backplane Drive
Voltage
ICL7107
Segment ONLY
Sinking Current
Full-Scale =
25 k W Between Common and
Positive Supply (With Respect to +
Supply)
V+ = to V- = 9V
999
-1
±
000.0
999/1000
–
±
000.0
Digital Reading
1000
+1
Digital Reading
Counts
-1
–
+1
Counts
-
50
-
uV/V
-
–
1.8
mA
-
–
1.8
mA
2.4
–
3.2
V
4
5
6
V
5
10
8
16
–
–
mA
mA
4
7
–
mA
V+ = 5V, Segment Voltage = 3V
(Except Pin 19 and 20)
Pin 19 Only
Pin 20 Only
NOTES:
1. Input voltages may exceed the supply voltages provided the input current is limited to 2. Unless otherwise noted, specifications apply to both the ICL7106 and ICL7107 at TA = +25
tested in the circuit of Figure 1. ICL7107 is tested in the circuit of Figure 2.
3. Not tested, guaranteed by design.
uA
°±
C, fCLOCK= 48kHz. ICL7106 is
BEIJING ESTEK ELECTRONICS CO.,LTD
2
ICL7106/7107
Typical Applications Circuit
Figure 1. ICL7106 Test circuit and typical application with LCD display components selected for 200 mV full scale
BEIJING ESTEK ELECTRONICS CO.,LTD
3
ICL7106/7107
Figure 2. ICL7107 Test circuit and typical application with LED display components selected for 200 mV full scale
Ordering Information
O RDERING NUM BER
ICL7107
Address :
P ACK AG E
M ARKIN G
DIP - 40
ICL7107
6A06--6A07
Rm 6A07,Changyin Office Building ,No.88,Yong Ding Road,Hai Dian District ,Beijing
Postalcode:100039
Tel: 86-010-58895780 / 81 / 82 / 83 / 84
Fax : 010-58895793
Http://www.estek.com.cn
Email:[email protected]
REV No:01-060811
BEIJING ESTEK ELECTRONICS CO.,LTD
4
Similar pages