LED - Lamp ELD-625-523 16.11.2007 rev. 04 Radiation Type Technology Case Red Standard AlInGaP/GaAs 5 mm plastic lens Description Red LED in standard 5 mm package with lens, housing without standoff leads 8,6 Ø5,9 ±0,2 Ø5,0 ±0,3 0,5 1 Note: Special packages with standoff available on request 2,54 Anode ±0,3 ±0,2 Applications 1,0 min 25,4 min Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 30 mA IFM 100 mA PD 100 mW Operating temperature range Tamb -40 to +85 °C Storage temperature range Tstg -40 to +100 °C Junction temperature TJ 100 °C TSd 260 °C Typ Max Unit 2,15 2,5 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min VF Reverse voltage IR = 10 µA VR 5 Radiant power* IF = 20 mA Φe 1,0 2,0 Luminous intensity IF = 20 mA Iv 3000 4000 4600 mcd Luminous flux IF = 20 mA Φv 460 500 540 mlm Peak wavelength IF = 20 mA λp Dominant wavelength IF = 20 mA λD Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 18 nm Viewing angle IF = 20 mA ϕ 20 deg. Switching time IF = 20 mA tr, tf 10 ns V mW 625 608 618 nm 628 nm *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545